Fluke 1730 Three-Phase Electrical Energy Logger Technical Data Energy logging is now within your reach-- discover where you're wasting energy, optimize your facility's energy use and reduce your bill. The new Fluke 1730 Three-Phase Electrical Energy logger introduces a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed; from the service entrance to individual circuits. Profiling energy usage across your facility helps you identify opportunities for energy savings, and provides you with the data you need to act on them. The new Energy Analyze software package allows you to compare multiple data points over time to build a complete picture of energy usage, which is the first step to reduce the cost of your energy bill. * Key measurements: voltage, current, power, power factor and associated values enable energy saving strategies to be implemented. * Bright, color touch screen: perform convenient in-the-field analysis and data checks with full graphical display. * Comprehensive logging: all measured values are automatically logged and can be reviewed during logging and before downloading for onthe-go analysis. More than 20 separate logging sessions can be stored on the instrument. * Optimized user interface: quick, guided, graphical setup ensures you're capturing the right data every time, and the intelligent verification function indicates correct connections have been made, reducing user uncertainty. * Complete `in-the-field' setup through the front panel: no need to return to the workshop for download and setup or to take a computer to the electrical panel. * Wide range power: power instrument directly from the measured circuit eliminating the need to find a power outlet while allowing the instrument to be secured safely inside electrical panels. * Two USB ports: one for PC connection and another for fast, simple download to standard USB thumb drives, or other USB devices. * Compact size: designed to fit in tight spaces and panels. * Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream. * Optimized measurement accessories: flat voltage cable and thin flexible current probes ensure easy installation even in tight spaces. * Battery life: four-hour operating time (backup time) per charge on lithium-ion battery. * Security: safeguard against theft with a Kensington lock. * All new, Energy Analyze application software: download, analyze and automated reporting for a complete picture of energy saving potential. Applications Power and energy logging When a piece of equipment is operated it instantaneously consumes a specific amount of power in watts (W) or kilowatts (kW). This power is accuDiscover how much energy individual pieces of mulated over the operating time and expressed as equipment are consuming when they are operatenergy consumed in kilowatt hours (kWh). Energy ing at minimum and maximum capacity. Check is what your electric utility charges for; there will capacity of circuits prior to adding additional be a standard charge from the utility per kilowatt loads (various standards exist for this process; hour. Utilities may have other additional charges, in the US the NEC 220-87 is the recommended standard). Load studies can also identify situations such as peak demand, which is the maximum power demand over a defined period of time, where you may be exceeding the allowable load often 15 or 30 minutes. There may also be power on the circuit or when an agreed peak demand factor charges, which are based on the effects of applies from the utility. For convenience, some load studies simply measure current which makes the inductive or capacitive loads in the facility. installation of the measuring equipment quick and Optimizing peak demand and power factor often results in lower monthly electricity bills. The easy. It is often recommended that load surveys 1730 Three Phase Electrical Energy logger has be performed for 30 days so that all typical load the capability to measure and characterize these conditions are encountered during the test. effects enabling you to analyze the results and save money. Energy surveys Users often ask where measurements should be Simplified load studies taken for an energy survey. The answer is mulFor situations where it's either difficult or impractiple points within the facility. Start at the main tical to make a voltage connection the simple load service feeders; compare the power and energy study feature allows users to perform a simplified measured here with the readings from the utilload study by measuring current only. The user ity meter to ensure you're receiving the correct can enter the nominal expected voltage to create charges. Then move downstream to the larger loads; these should be easy to identify by the cur- a simulated power study. For accurate power rent rating of the electrical panels downstream of and energy studies it is required to monitor both voltage and current but this simplified method is the service entrances. Measuring at many points useful in certain circumstances. will allow a full picture of energy usage across the facility to be developed. The next question users typically have is how long an energy survey should last. This of course depends on the facility, but it is recommended that you measure for a period that matches a typical facility activity period. If the facility operates over a five day work week with down time on the weekend, a seven day survey will most likely capture typical conditions. If the facility operates at a constant level for 24 hours a day, 365 days a year, a single day could be reasonably representative as long as you avoid a period where there may be planned maintenance. To capture a full picture of the facilities energy usage it is not necessarily required to have measurements made simultaneously at every consumption point in the facility. To get a comprehensive picture, spot measurements can be made and then compared on a sliding time timescale. For example, you could compare the service entrance results from a typical Tuesday between 6:00 am and 12:00 pm with those of a larger load in the facility. Typically there will be some correlation between these profiles. Load studies 2 Fluke Corporation Fluke 1730 Three-Phase Electrical Energy Logger Specifications Accuracy Parameter Voltage iFlex1500-12 Current: Direct input iFlex3000-24 iFlex6000-36 i40s-EL clamp Frequency Aux input Voltage Min/Max Current Min/Max Cos/DPF Power factor THD on voltage THD on current Range Resolution 1000 V 150 A 1500 A 300 A 3000 A 600 A 6000 A 4A 40 A 42.5 Hz to 69 Hz 10 V dc 1000 V defined by accessory 0 <= Cos <=1 0 <= PF <=1 1000 % 1000 % 0.1 V 0.1 A 1A 1A 10 A 1A 10 A 1 mA 10 mA 0.01 Hz 0.1 mV 0.1 V defined by accessory 0.01 0.01 0.1 % 0.1 % Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale) (0.2 % + 0.01 %) (1 % + 0.02 %) (1 % + 0.02 %) (1 % + 0.02 %) (1 % + 0.02 %) (1.5 % + 0.03 %) (1.5 % + 0.03 %) (0.7 % + 0.02 %) (0.7 % + 0.02 %) (0.1 %) (0.2 % + 0.02 %) (1 % + 0.1 %) (5 % + 0.2 %) 0.025 0.025 (2.5 % 0.05 %) (2.5 % 0.05 %) Intrinsic uncertainty (% of reading + % of range)1 Parameter Influence iFlex1500-12 iFlex3000-24 quantity 150A/1500A 300A/3000A Active power P PF 0.99 1.2 % + 1.2 % + 0.005 % 0.0075 % 0.5 <PF <0.99 1.2 % + 7 x 1.2 % + 7 x (1-PF) (1-PF) +0.005 % + 0.0075 % Apparent power S, S fund. 0 PF 1 1.2 % + 1.2 % + 0.005 % 0.0075 % Reactive power N, Q fund. 0 PF 1 2.5 % of measured apparent power Additional uncertainty in % U >250 V 0.015 % 0.0225 % of range1 1 iFlex6000-36 600/6000A 1.7 % + 0.0075 % 1.7 % + 7 x (1-PF) + 0.0075 % 1.7 % + 0.0075 % i40s-EL 4A/40A 1.2 % + 0.005 % 1.2 % + 10 x (1-PF) + 0.005 % 1.2 % + 0.005% 0.0225 % 0.015 % Range = 1000 V x Irange Reference conditions: Environmental: 23 C 5 C, instrument operating for at least 30 minutes, no external electrical/magnetic field, RH <65 % Input conditions: Cos/PF=1, Sinusoidal signal f=50 Hz/60 Hz, power supply 120 V/230 V 10 %. Current and power specifications: Input voltage 1 ph: 120 V/230 V or 3 ph wye/delta: 230 V/400 V Input current: I > 10 % of Irange Primary conductor of clamps or Rogowski coil in center position Temperature coefficient: Add 0.1 x specified accuracy for each degree C above 28 C or below 18 C 3 Fluke Corporation Fluke 1730 Three-Phase Electrical Energy Logger Electrical specifications Power supply Voltage range Power consumption Efficiency Maximum no-load consumption Mains power frequency Battery On-battery runtime Charging time Data acquisition Resolution Sampling frequency Input signal frequency Circuit types THD Averaging period Demand interval Data storage Memory size Logging period 100 V to 500 V using safety plug input when powering from the measurement circuit 100 V to 240 V using standard power cord (IEC 60320 C7) Maximum 50 VA (max. 15 VA when powered using IEC 60320 input) 68.2 % (in accordance with energy efficiency regulations) < 0.3 W only when powered using IEC 60320 input 50/60 Hz 15 % Li-ion 3.7 V, 9.25 Wh, customer-replaceable Four hours in standard operating mode, up to 5.5 hours in power saving mode < 6 hours 16-bit synchronous sampling 5120 Hz 50/60 Hz (42.5 to 69 Hz) 1-, 1- IT, Split phase, 3- delta, 3- wye, 3- wye IT, 3- wye balanced, 3- Aron/Blondel (2-element delta), 3- delta open leg, Currents only (load studies) THD for voltage and current is calculated using 25 harmonics User selectable: 1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min User selectable: 5 min, 10 min, 15 min, 20 min, 30 min Internal flash memory (not user replaceable) Typical 20 logging sessions of 10 weeks with 10-minute intervals1 Averaging period 1 second 5 seconds 10 seconds 30 seconds 1 minute 5 minutes 10 minutes 15 minutes 30 minutes Interfaces USB-A USB-mini Extension port Voltage inputs Number of inputs Maximum input voltage Input impedance Bandwidth (-3 dB) Scaling Measurement category Current inputs Number of inputs Input voltage Rogowski coil input Range Bandwidth (-3 dB) Scaling Recommended for 20 sessions 3 hours 15 hours 28 hours 3.5 days 7 days 5 weeks 10 weeks 3.5 months 7 months File transfer via USB flash drive, firmware updates Max. current: 120 mA Data download device to PC Accessories 4 (3 phases and neutral) 1000 Vrms, CF 1.7 10 M 2.5 kHz 1:1, 10:1, 100:1, 1000:1 and variable 1000 V CAT III/600 V CAT IV 3, mode selected automatically for attached sensor Clamp input: 500 mVrms/50 mVrms; CF 2.8 150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4; all at nominal probe range 1 A to 150 A/10 A to 1500 A with thin iFlex flexible current probe, 12 inches 3 A to 300 A/30 A to 3000 A with thin Flex flexible current probe, 24 inches 6 A to 600 A/60 A to 6000 A with thin iFlex flexible current probe, 36 inches 40 mA to 4 A/0.4 A to 40 A with 40 A clamp i40s-EL 1.5 kHz 1:1 and variable 1 The number of possible logging sessions and logging period depends on user requirements. 4 Fluke Corporation Logging Period for 1 session 2.5 days 12 days 24 days 10 weeks 20 weeks 2 years > 2 years > 2 years > 2 years1 Fluke 1730 Three-Phase Electrical Energy Logger Auxiliary inputs Number of inputs Input range Scale factor (available 2014) Displayed units (available 2014) Environmental specifications Operating temperature Storage temperature Operating humidity Operating altitude Storage altitude Enclosure Vibration Safety EMI, RFI, EMC Electromagnetic compatibility Radio frequency emissions Temperature coefficient General specifications Color LCD display Warranty Dimensions Weight External protection 5 Fluke Corporation 2 0 to 10 V dc, 1 reading/s Format: kx + d user configurable User configurable (7 characters, for example, C, psi, or m/s) -10 C to +50 C (14 F to 122 F) -20 C to +60 C (-4 F to 140 F) 10 C to 30 C (50 F to 86 F) max. 95 % RH 30 C to 40 C (86 F to 104 F) max. 75 % RH 40 C to 50 C (104 F to 122 F) max. 45 % RH 2000 m (up to 4000 m derate to 1000 V CAT II/600 V CAT III/300 V CAT IV) 12,000 m IP50 in accordance with EN60529 MIL 28800E, Type 3, Class III, Style B IEC 61010-1: Overvoltage CAT IV, Measurement 1000 V CAT III/600 V CAT IV, Pollution Degree 2 EN 61326-1: Industrial Applies to use in Korea only. Class A Equipment (Industrial Broadcasting and Communication Equipment) IEC CISPR 11: Group 1, Class A 0.1 x accuracy specification/C 4.3-inch active matrix TFT, 480 pixels x 272 pixels, resistive touch panel 1730 and power supply: Two-years (battery not included) Accessories: One-year Calibration cycle: Two-years 1730: 19.8 cm x 16.7 cm x 5.5 cm (7.8 in x 6.6 in x 2.2 in) Power supply: 13.0 cm x 13.0 cm x 4.5 cm (5.1 in x 5.1 in x 1.8 in) 1730 with power supply attached: 19.8 cm x 16.7 cm x 9 cm (7.8 in x 6.6 in x 3.5 in) 1730: 1.1 kg (2.5 lb) Power supply: 400 g (0.9 lb) Holster, Kensington lock slot Fluke 1730 Three-Phase Electrical Energy Logger 1500-12 iFlex Flexible Current Probe specifications Measuring range Nondestructive current Intrinsic error at reference condition* Accuracy 1730 + iFlex Temperature coefficient over operating temperature range Working voltage Probe cable length Probe cable diameter Minimum bending radius Output cable length Weight Transducer cable material Coupling material Output cable Operating temperature Temperature, non-operating Relative humidity, operating IP rating Warranty 1 to 150 A ac / 10 to 1500 A ac 100 kA (50/60 Hz) 0.7 % of reading (1 % of reading + 0.02 % of range) 0.05 % of reading/C 0.09 % of reading/F 1000 V CAT III, 600 V CAT IV 305 mm (12 in) 7.5 mm (0.3 in) 38 mm (1.5 in) 2 m (6.6 ft) 115 g TPR POM + ABS/PC TPR/PVC -20 C to +70 C (-4 F to 158 F) temperature of conductor under test shall not exceed 80 C (176F) -40 C to +80 C (-40 F to 176 F) 15 % to 85 % non-condensing IEC 60529:IP50 One-year *Reference condition: * Environmental: 23 C 5 C, no external electrical/magnetic field, RH 65 % * Primary conductor in center position Ordering information 1730/BASIC Three-Phase Electrical Energy logger (excludes current probes). 1730/US Portable Energy Logger US version 1730/EU Portable Energy Logger EU version 1730/INTL Portable Energy Logger INTL version Accessories i1730-flex1500 iFlex flexible current probe 1500A 12 inch i1730-flex3000 iFlex flexible current probe 3000A 24 inch i1730-flex6000 iFlex flexible current probe 6000A 36 inch i40s-EL i40s-EL Clamp-on Current Transformer i1730-flex1500/3pk iFlex flexible current probe 1500A 12 inch, 3 pack i1730-flex3000/3pk iFlex flexible current probe 3000A 24 inch, 3 pack i1730-flex6000/3pk iFlex flexible current probe 6000A 36 inch, 3 pack i40s-EL/3pk i40s-EL Clamp-on Current Transformer, 3 pack 1730-TL0.1M Test Lead Set; 1000 V CAT III, straight plug; 0.1 m; silicone; red/black 1730-TL2M Test Lead Set, 1000 V CAT III; straight plug; 2 m; PVC red/black 3PHVL-1730 Cable Assembly, Voltage Test Lead 3-Phase+N C1730 1730 Soft Case WC100 Color Localization Set 1730-Hanger Hanging strap 1730-Cable AUX input cable Fluke. The Most Trusted Tools in the World. Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com (c)2013 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 8/2013 4314073B_EN Pub ID: 12028-eng Rev. 01 Modification of this document is not permitted without written permission from Fluke Corporation. 6 Fluke Corporation Fluke 1730 Three-Phase Electrical Energy Logger