Data transmission
USB specification 3.0
Data rate: up to 5Gb/s for high speed USB
Applications
Embedded computers
Data acquisition and transmission in harsh
environment
Railways
Battelfield communication systems
Navy systems
In some applications, a transversal sealing for the receptacle is a « must ».
This will prevent fluids and dust from going through the receptacle when
plug or cap are not mated to the receptacle. The sealed solution (version
"S") has a compound at the rear of the receptacle below. In addition,
the Sealed USB3F TV has been successfully tested in very high vibration
corresponding to airplane applications.
COMPLIANT
ROHS
N & BZ
Main characteristics
Sealed against fluids and dusts (IP68)
Shock, vibration and traction resistant
No cabling operation in field and no tools required
Improved EMI protection
Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-
decoupling device - Shell size 15
2 mechanical coding/polarization possibilities by the user (receptacle insert rota-
tion)
USB3F TV plug retention in the receptacle: 100 N in the axis
Mating cycles: 500 minimum
Environmental protection
Sealing (when mated): IP68 (temporary immersion)
Salt spray: 48 h with nickel plating
> 500 h with olive drab cadmium
500 h with marine bronze shell
Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102
Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s
Shocks: IK06 Ź weight of 250 g drop from 40 cm [15.75 in] onto connectors
(mated pair)
Humidity: 21 days, 43°C, 98% humidity
Temperature range: - 40°C / +85°C
Series USB3 Field TV USB3F TV 2 SA 03 G STR
Shell type
2S: square flange receptacle
7S: jam nut receptacle
Coding
A or B
USB cable length
03: 0.3 m [11.81 inches]
05: 0.5 m [19.68 inches]
10: 1 m [39.37 inches]
15: 1.5 m [59.05 inches]
Shells material & finish
G: aluminium shell - olive drab cadmium plating
N: aluminium shell - nickel plating - ROHS compliant
Type of cable *
ACROS: high reliability crossed USB3 cable with plug at the end
ASTR: high reliability straight USB3 cable with plug at the end
OPEN: high reliability cable open = no plug at the end
Examples: - square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 S B 05 N CROS
- jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, olive drab cadmium plating: USB3F TV 7 S A 10 G STR
- jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, olive drab cadmium plating: USB3F TV 7 S B 03 G OPEN
Part number code
NEW
USB3.0
* IMPORTANT NOTE
t for PC to PC application, use a “CROS” type of cable
t for PC to peripheral application, use a “STR” type of cable
See Configuration use on page 87