MI NI MU M IN DU FR CT EQ AN UE CE NC & Y QT (M E SR Hz ST F MI ) NI MU M DC (M Hz R MA ES ) XI IST MU A N CU M ( CE RR OH MA E MS XI NT ) MU R M ATI (m NG A) Q IN D (n UCT H) A 1 NC 0% E DA SH Open Construction Wirewound Surface Mount Inductors NU MB ER * 0603R 0603 Series SERIES 0603 CERAMIC CORE Operating Temperature Range -40C to +125C Inductance and Q tested on HP4291A using HP16193A test fixture, or equivalent Packaging Tape & reel (8mm): 7" reel, 4000 pieces max. 1.6 1.8 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.8 7.5 8.2 8.7 9.5 10 11 12 15 16 18 22 24 27 30 33 36 39 43 47 56 68 72 82 100 110 120 150 180 220 270 330 390 16 16 22 22 22 22 25 20 20 27 27 27 27 27 31 31 35 35 35 35 38 38 40 40 40 40 40 38 38 38 37 34 34 34 32 32 32 25 25 25 25 25 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 150 150 150 150 150 100 100 100 100 100 100 6000 6000 6000 5800 6000 5800 5800 5800 5800 5800 4800 4800 4800 4800 4800 4000 4000 4000 3300 3100 3000 2800 2800 2800 2300 2300 2200 2000 2000 1900 1700 1700 1700 1400 1350 1300 1300 1200 1200 900 900 900 0.040 0.045 0.080 0.063 0.080 0.063 0.120 0.160 0.170 0.110 0.110 0.110 0.110 0.130 0.130 0.086 0.130 0.170 0.110 0.170 0.190 0.130 0.220 0.150 0.220 0.250 0.250 0.280 0.280 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.950 1.400 1.600 2.100 3.800 4.350 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 400 400 400 300 300 280 250 250 200 100 100 RF INDUCTORS Physical Parameters Inches Millimeters A 0.071 Max. 1.80 Max. B 0.045 Max. 1.14 Max. C 0.040 Max. 1.02 Max. D 0.030 (Ref. only) 0.76 (Ref. only) E 0.018 (Ref. only) 0.44 (Ref. only) F 0.040 (Ref. only) 1.03 (Ref. only) G 0.040 1.03 H 0.025 0.64 I 0.025 0.64 -1N6K -1N8K -3N3K -3N6K -3N9K -4N3K -4N7K -5N1K -5N6K -6N8K -7N5K -8N2K -8N7K -9N5K -10NK -11NK -12NK -15NK -16NK -18NK -22NK -24NK -27NK -30NK -33NK -36NK -39NK -43NK -47NK -56NK -68NK -72NK -82NK -101K -111K -121K -151K -181K -221K -271K -331K -391K Optional Tolerances: J = 5% G=2% (1.6nH & 1.8nH Min. Tolerance is 5%) *Complete part # must include series # PLUS the dash # For further surface finish information, refer to TECHNICAL section of this catalog. LAND PATTERN DIMENSIONS 4/2005 www.delevan.com E-mail: apisales@delevan.com 270 Quaker Rd., East Aurora NY 14052 * Phone 716-652-3600 * Fax 716-652-4814 PAGE 11