MRJ Rugged RJ45 Connector Product Specification S6043C Rev 1.0 About Amphenol Commercial Products Amphenol's commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. MRJ-5480-01 SHOWN VERTICAL, PCB TAIL, 8 POSITION RJ45 With matching RJ45 MRJ-5380-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 With Cable Header Overview This Product Specification defines the general use and performance parameters for Amphenol's MRJ series of connector. With Terminal Block Availability: Right angle PCB tail termination with 8 or 10 positions, LED options, EMI ferrite filtering and PCB options (with matching RJ connector, cable header, terminal block or for hand wiring). Vertical PCB tail termination with 8 positions and LED options. Both termination styles have dust covers for enhanced mating area protection. A clear rubber boot for use with standard plugs is also available. Usage The connector system is designed to provide a standard RJ45 interface, ideal for harsh environments where Ethernet/IP protocol is used. Protection is provided for IP67 applications per IEC 60529 specification. Data rates conform to Gigabit Ethernet (1000Base-T) protocols. With PCB for wiring Applications Intended for use in applications such as: Medical equipment ATM machines Lottery terminals & slot machines GPS positioning equipment Revision date: May 04, 2011 Military vehicles, radios, computers Test equipment Mobile communication systems Traffic control & monitoring systems Page 1 of 3 S6043C Rev 1.0 About Amphenol Commercial Products Amphenol's commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products MDB Connector Electrical Characteristics Current rating: 1.5A per contact Contact resistance: 30 m max Insulation Resistance: 500 M min Dielectric Withstand Voltage: 1000/1500 V AC @ sea level LED forward DC current: 25mA max LED forward Voltage: 2.5 Volts max. @ 20mA Minimum Impedance (Ferrite): 38 Ohms at 25 MHz Connector Mechanical Characteristics Thermal Shock: 25 cycles @ -40 to +70 C Physical Shock: Per EIA364-27, Condition H (11ms 30G) Humidity: Per EIC512-6 / EIA364-11A Vibration: Per EIA364-28, Condition 5A Salt spray: Per EIA364-26, 250 Hrs Mating cycles: 2500 Assembly Process Characteristics Recommended Torque for Panel Mount Screws: 0.45 to 0.65 Nm (4.00 - 5.75 in-lbs). Hand or wave solder: 150C for 180 seconds (Pre-heat) and 265C for 8 seconds max (Solder tails). Solder tails suitable for PCB thickness of 1.57 to 3.18 mm (.062" to 0.125") Material Requirements 9 POSITION CONNECTOR SHOWN MUSB MUSB-B151-34 SERIES MINI-B, RIGHT ANGLE SHOWN MRJ connectors are RoHS compliant. Unless otherwise specified, the materials for each component shall be: Contacts: Phosphor Bronze with 1.27m (50") min Gold over 1.27m (50") min Nickel Housing: High temperature thermoplastic, UL94V-0 rated, Black Front Housing: Clear Polycarbonate (customer process cleaners must be compatible) Shell: Die cast Zinc alloy, Nickel plating Gasket: Silicone rubber LED: Epoxy lens, Tin plating on steel tail Temperature rise: Meets the requirement of 30 C T Operating temperature -40 to +105 C Available Documents Drawing Numbers: MUSB-C111-30 SERIES A, RIGHT ANGLE, STACKED SHOWN P-MRJ-53XX-X1 MRJ Receptacle, Right Angle, 8 or 10 position P-MRJ-548X-X1 MRJ Receptacle, Vertical, 8 position P-MRJ-55XX-X1 MRJ Receptacle, Right Angle on PCB with Right Angle Cable Header P-MRJ-578X-X1 MRJ Receptacle, Right Angle on PCB with RJ connector P-MRJ-59XX-X1 MRJ Receptacle, Right Angle on PCB with Terminal Blocks P-MRJ-63XX-X1 MRJ Receptacle, Right Angle, EMI filtered P-MRJ-758X-X1 MRJ Receptacle, Right Angle on PCB with Transient Voltage Protection and Cable Header Contact Factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations QTR9300376 Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Quality Test Report Page 2 of 3 Copyright (c) Amphenol Corporation 2011 * All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP. S6043C Rev 1.0 Product Numbering System MRJ MRJ - 5 3 8 0 - 0 1 Connector series designation - Rugged RJ Version 3 - Receptacle, RJ11 (proposed) 5 - Receptacle, RJ45 6 - Receptacle, RJ45, with EMI filter 7 - Receptacle, RJ45, with Transient Voltage Protection (proposed) note 1 Termination 1 - PCB tail, vertical, with dust cover (note 2) 3 - PCB tail, right angle 4 - PCB tail, vertical, no dust cover 5 - PCB tail, right angle, on PCB with right angle cable header 7 - PCB tail, right angle, on PCB with RJ45 right angle termination 8 - PCB tail, right angle, on PCB with RJ45 vertical termination 9 - PCB tail, right angle, on PCB with terminal block A -PCB tail, right angle, on PCB for hand wiring (termination code 5 board) B - PCB tail, right angle, on PCB with vertical cable header C - PCB tail, right angle, on PCB for hand wiring (termination code 7 board) Number of contacts (note 3) 8 - 8 contacts A - 10 contacts LED options 0 - No LEDs 1 - Green left, Yellow right 4 - Yellow left, Green right 5 - Green left, green right Options (Tail Length & Thread) 0 - Tail 2.54mm (.100"), standard, through hole or #4-40 threaded lugs B - Tail 3.81mm (.150"), through hole or #4-40 threaded lugs M - Tail 2.54mm (.100"), M3 threaded lugs P - Tail 3.81mm (.150"), M3 threaded lugs Other Features 1 - 1 port (vertical has through hole mounting, right angle has threaded lug) B - 1 port, vertical connector, through hole mounting, gasket on front shell flange F - 1 port, vertical connector, threaded lug mounting N - 1 port, vertical connector, threaded lug mounting, no alignment insert, contact & led length = 4mm (.157") Unique Special Code No Digit - Part defined by previous 10 digits 1 to 9 - Unique special feature. Note 4 Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 Notes 1) Transient voltage protection is only possible with the connector supplied on a PCB. 2) Dust covers supplied bulk packed with the connectors. 3) 10 contact option is currently available for right angle PCB tail connectors only. 4) Many unique features are readily available to suit customer requirements. Consult with Amphenol Canada for details. Page 3 of 3 Copyright (c) Amphenol Corporation 2011 * All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.