Without interrupting power, the Amprobe AT-2000-A Advanced Wire
Tracer Series easily traces energized or non-energized wires or cables
buried behind walls up to 13’ (4 m) deep.
AT-2004-A Advanced Wire Tracer
AT-2005-A Advanced Wire Tracer with Battery Booster & Charger
AT-2000-A
Advanced Wire Tracer Series
www.Amprobe.com
Advanced in Wire Tracing Technology
AT-2000-A ADVANCED WIRE TRACER SERIES SPECIFICATIONS
• Traces live wires, non-energized or open (broken) wires buried or
hidden behind walls up to 13’ (4 m) deep
• Performs tests without interrupting power
• Locates breakers, neutral and ground lines
• Detects and traces wires in walls, floors, conduit, computer cables, etc.
• Pinpoints shorts, ground faults and broken wires
• Does not interfere with sensitive electronic equipment
• Supplied with battery booster which strengthens signal for open
tracing (AT-2005-A only)
For detailed specifications and ordering info go to www.Amprobe.com 6001565 A
©2013 Amprobe. All rights reserved.
R2000
S2600-A T2200
Features AT-2000-A Series
Traces energized wires and locates breakers without interrupting power. 9 – 300 V ac/dc (S2600-A signal load generator)
Traces non-energized wires (continuity and grounded wire) and
pinpoints shorts & ground faults. T2200 transmitter and 9 V battery
Pinpoints non-energized open wires (broken or disconnected wire). T2200 transmitter
Supplied with clamp-on attachment to inject signal
without contacting a bare wire. Yes
Supplied with battery booster to strengthen signal for open tracing. Yes (AT-2005-A only)
For more detailed specifications see users manual.
Kit Contains AT-2004-A AT-2005-A
R2000 Receiver
S2600-A Load Signal Generator
T2200 Transmitter for Open Tracing
A2201 Clamp-on Transmitter Accessory
C2901 Cord Set - 110V Plug to Banana Plugs
C2902 Cord Set - Alligator Clips to Banana Plugs
B2024 Rechargeable Battery Pack
B2025 Battery Pack Recharger
Users Manual
www.Amprobe.com
AT-2000-A ADVANCED WIRE TRACER SERIES DETAILED SPECIFICATIONS
Specifications Range
Operating temperature 0 °F to 120 °F (-18 °C to 49 °C)
Storage temperature -40 °F to 150 °F (-40 °C to 66 °C)
Case size 11 x 15.5 x 4 in (39.4 x 27.9 x 10.2 cm)
R2000 Receiver
Detectors Electromagnetic coil pick-up for short mode
Electrostatic plate pick-up for open mode
Sensitivity selection x1, x10, x100 course gain adjustment; 0 – 10 fine adjustment
Short mode performance Over 20 feet in air under test conditions
Open mode performance Over 12 feet in air under test conditions
60 Hz Rejection 120 bd
Power supply 9 V alkaline battery
Display 10 LEDs with Chroma filter lens
S2600-A Load Signal Generator
Operating voltage 9 - 300 V ac/dc
Operating frequency 32.768 KHZ
Duty cycle Transmit 2 pulses with a duration of 0.0625 seconds each, every 0.5 seconds
Current output – Low mode 35 mA peak, 4 mA average
Current output – High mode 70 mA peak, 6 mA average
T2200 Transmitter
Operating frequency 32.768 kHz
Duty cycle Transmit 2 pulses with a duration of 0.0625 each every 0.5 seconds
Signal output 9 V battery 24 V battery
High setting 1 A, 31 V 3 A, 105 V
Medium setting 1.8 A, 13 V 6 A, 45 V
Low setting 3.0 A, 6.5 V 10 A, 22 V
Battery 9 V alkaline
24 V jack will accept battery pack accessory (B2024 or B2025)
A2201 Clamp-on Transmitter Accessory
Operating frequency 32.768 kHz as supplied by the T2200
Case break down voltage 3000 V
Maximum wire size 2000 MCM or 2” diameter cable
Battery None, power is supplied by the T2200
B2024 Rechargeable Battery Pack (AT-2005-A only)
Type Nickel-cadmium rechargeable (20AA cells)
Capacity 24 V, 600 mAh
Recharge time 14 hours
B2025 Battery Pack Recharger (AT-2005-A only)
Input 115 V ac
Output 24 V dc @ 350 mah
For complete specifications please download the product datasheet and the users manual on www.Amprobe.com.
Amprobe®
info@amprobe.com
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
Amprobe® Europe
In den Engematten 14,
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
For detailed specifications and ordering info go to www.Amprobe.com 6001565 A
©2013 Amprobe. All rights reserved.