78
4
LP
Style
0402
Size
N
Type
XXXX
Frequency
MHz
X
Sub-Type
N
Termination
LGA
Lead Free
TR
Taped & Reeled
Thin-Film Low Pass Filter
LP0402N Series Harmonic Lead-Free LGA Termination
RFAP TECHNOLOGY
The LP0402N Series Harmonic Low Pass Filter is based on
the proprietary RFAP Thin-Film multilayer technology. The
technology provides a miniature part with excellent high
frequency performance and rugged construction for reliable
automatic assembly.
The RFAP Harmonic Low Pass Filter is offered in a variety of
frequency bands compatible with various types of high
frequency wireless systems.
APPLICATIONS
• Wireless communications
• Wireless LAN’s
• GPS
• WiMAX
LAND GRID ARRAY ADVANTAGES
• Inherent Low Profile
• Self Alignment during Reflow
• Excellent Solderability
• Low Parasitics
• Better Heat Dissipation
QUALITY INSPECTION
Finished parts are 100% tested for electrical parameters and
visual characteristics. Each production lot is evaluated on a
sample basis for:
• Static Humidity: 85ºC, 85% RH, 160 hours
• Endurance: 125ºC, IR, 4 hours
TERMINATION
Nickel/Lead-Free solder coating compatible with automatic
soldering technologies: reflow, wave soldering, vapor phase
and manual.
HOW TO ORDER
LEAD-FREE COMPATIBLE
COMPONENT
79
4
DIMENSIONS: millimeters (inches)
(Bottom View)
L1.0±0.05
(0.040±0.002)
W0.58±0.04
(0.023±0.002)
T0.35±0.5
(0.014±0.002)
A0.20±0.06
(0.008±0.002)
B0.18±0.05
(0.007±0.002)
S0.05±0.05
(0.002±0.002)
TERMINALS (Top View)
RECOMMENDED PAD LAYOUT (mm)
Thin-Film Low Pass Filter
LP0402N Series Harmonic Lead-Free LGA Termination
L
T
S
W
B
A
0.30
(0.012)
0.15
(0.006)
0.51
(0.020)
0.20
(0.008)
IN
OUT
GND
GND
ELECTRICAL CHARACTERISTICS
(Guaranteed over –40°C to +85°C Operating Temperature Range)
P/N Frequency I. Loss R. Loss Attentuation
Band [MHz] [dB] [dB] [dB]
LP0402N3500ANTR 3400-3600 0.3 typ 19 30 @ 2xF0
(0.5 max) 20 @ 3xF0
LP0402N5200ANTR 5050-5350 0.2 typ 19 30 @ 2xF0
(0.5 max) 20 @ 3xF0
80
4
Thin-Film Low Pass Filter
LP0402N Series Harmonic Lead-Free LGA Termination Test Jig
-50
-40
-30
-20
-10
0
024681012
Frequency (GHz)
dB
LP0402N3500ANTR
F0
2F0
3F0
-50
-40
-30
-20
-10
0
024681012
Frequency (GHz)
dB
LP0402N5200ANTR
F0
2F0
GENERAL DESCRIPTION
These jigs are designed for testing the LP0603 LGA Low
Pass Filters using a Vector Network Analyzer.
They consist of a dielectric substrate, having 50Ω microstrips
as conducting lines and a bottom ground plane located at a
distance of 0.127mm from the microstrips.
The substrate used is Neltec’s NH9338ST0127C1BC (or
similar).
The connectors are SMA type (female), ‘Johnson
Components Inc.’ Product P/N: 142-0701-841 (or similar).
Both a measurement jig and a calibration jig are provided.
The calibration jig is designed for a full 2-port calibration, and
consists of an open line, short line and through line. LOAD
calibration can be done by a 50Ω SMA termination.
MEASUREMENT PROCEDURE
Follow the VNA’s instruction manual and use the calibration
jig to perform a full 2-Port calibration in the required band-
widths.
Solder the filter to the measurement jig as follows:
Input ➨Connector 1 (Jig) GND (Filter) ➨GND (Jig)
(Filter)
Output ➨Connector 2 (Jig) GND (Filter) ➨GND (Jig)
(Filter)
Set the VNA to the relevant frequency band. Connect the
VNA using a 10dB attenuator on the jig terminal connected
to port 2 (using an RF cable).
TEST JIG FOR LP0402 LOW PASS FILTER
Connector 1
Connector 2
Load &
Through
Short line to
GND
Connector
Johnson
P/N 142-0701-841
Open
line
Load &
Through
Measurement Calibration Jig
