9162 SIM Card Block GENERAL DESCRIPTION The standard SIM connector is specifically designed for handheld devices requiring secure subscriber identification. The connectors are available in a standard 6 pin configuration on a 2.54mm pitch and at optional heights of 0.8mm, 1.6mm or 2.4mm. Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanical cycles. Our contact design is specifically rounded to avoid any possible damage during and after card insertion to the card itself, assuming normal use. The design also incorporates protection features to avoid contact damage during this operation such as contact snagging. In addition to our offering presented here, other operating heights are available as custom alternatives. Please contact the appropriate sales office for further details of this service. KEY FEATURES AND BENEFITS * Produced for use with both full ISO cards and micro SIM cards. * Stand-off designs allow other components to be mounted underneath the connector offering greater effective use of PCB real estate. * The insulator is molded from high temperature plastic enabling the connector to be used in convection or infrared soldering processes. * Supplied on tape and reel packaging for pick and place assembly. * RoHS Compliant. 0.8mm PCB Pad Layout 2 PITCHES @ 2.540 = 5.08 (0.100 = 0.200) NO GO AREA FOR COMPONENTS 2 PITCHES @ 2.540 = 5.08 (0.100 = 0.120) PCB PADS (6 POSITIONS) 1.00 (0.039) 1.6mm / 2.4mm PCB Pad Layout (CONNECTOR SUPPORT AREAS) 4.42 (0.174) 1.10 (0.043) TYP 0.77 (0.030) TYP 8.64 (0.340) 1.00 (0.039) 0.93 (0.037) 2.54 (0.100) 2.54 (0.100) 1.00 (0.039) 15.20 (0.598) 1.10 (0.043) TYP O 1.00 (0.039) 0.50 (0.020) TYP 1.00 (0.039) 0.93 (0.037) 12.10 (0.476) 0.77 (0.030) TYP 15.20 (0.598) 19 9162 SIM Card Block Connector Height 0.8mm 0.60 (0.024) 0.80 (0.031) 8.64 (0.340) 12.10 (0.476) Connector Height 1.6mm 0.60 (0.024) 1.60 (0.063) 12.10 (0.476) 8.64 (0.340) ALL CONTACT TAILS WITHIN 0.10mm COPLANARITY TOLERANCE HEIGHT UNDER UNSULATOR = CONNECTOR HEIGHT - 0.8mm ALL CONTACT TAILS WITHIN 0.10mm COPLANARITY TOLERANCE Connector Height 2.4mm 0.60 (0.024) 2.40 (0.094) 12.10 (0.476) 8.64 (0.340) ALL CONTACT TAILS WITHIN 0.10MM COPLANARITY TOLERANCE 15.00 (0.591) 1.00 (0.039) TYP 0.19 (0.007) TYP Illustration of Pin Configuration PIN 1 0.670 (0.026) REF TYP PIN 1 2 PITCHES @ 2.540 = 5.08 (0.100 = 0.200) 7.62 +0.25 -0 (0.300 +0.010 -0) HOW TO ORDER 20 00 9162 006 006 Prefix Series Number of Contacts SIM Type 006 = Selective Gold, Pure Tin Tail 080 Connector Height 080 = 0.8mm stack height 160 = 1.6mm stack height 240 = 2.4mm stack height