9162 SIM Card Block
GENERAL DESCRIPTION
The standard SIM connector is specifically designed for handheld devices
requiring secure subscriber identification.
The connectors are available in a standard 6 pin configuration on a 2.54mm
pitch and at optional heights of 0.8mm, 1.6mm or 2.4mm.
Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanical
cycles.
Our contact design is specifically rounded to avoid any possible damage
during and after card insertion to the card itself, assuming normal use. The
design also incorporates protection features to avoid contact damage during
this operation such as contact snagging.
In addition to our offering presented here, other operating heights are available
as custom alternatives.
Please contact the appropriate sales office for further details of this service.
KEY FEATURES AND BENEFITS
• Produced for use with both full ISO cards and micro SIM cards.
• Stand-off designs allow other components to be mounted underneath
the connector offering greater effective use of PCB real estate.
• The insulator is molded from high temperature plastic enabling the
connector to be used in convection or infrared soldering processes.
• Supplied on tape and reel packaging for pick and place assembly.
• RoHS Compliant.
0.8mm PCB Pad Layout 1.6mm / 2.4mm PCB Pad Layout
PCB PADS
(6 POSITIONS)
1.10 (0.043)
TYP
15.20 (0.598)
0.77 (0.030)
TYP
1.00
(0.039)
1.00
(0.039)
2 PITCHES
@ 2.540 = 5.08
(0.100 = 0.200)
1.10 (0.043)
TYP
0.77 (0.030)
TYP
1.00
(0.039) 1.00
(0.039)
2 PITCHES
@ 2.540 = 5.08
(0.100 = 0.120)
4.42 (0.174)
12.10 (0.476)
15.20 (0.598)
Ø 1.00 (0.039)
8.64
(0.340)
0.50 (0.020)
TYP
2.54
(0.100)
2.54
(0.100)
0.93
(0.037)
0.93
(0.037)
NO GO AREA
FOR COMPONENTS
(CONNECTOR SUPPORT AREAS)
19
Connector Height 0.8mm
Connector Height 1.6mm
Connector Height 2.4mm
Illustration of Pin Configuration
12.10 (0.476)
0.60
(0.024)
0.80
(0.031) 8.64 (0.340)
ALL CONTACT TAILS WITHIN
0.10mm COPLANARITY TOLERANCE
12.10 (0.476)
0.60
(0.024)
1.60
(0.063) 8.64 (0.340)
ALL CONTACT TAILS WITHIN
0.10mm COPLANARITY TOLERANCE
HEIGHT UNDER UNSULATOR
= CONNECTOR HEIGHT - 0.8mm
12.10 (0.476)
0.60
(0.024)
8.64 (0.340)
2.40
(0.094)
ALL CONTACT TAILS WITHIN
0.10MM COPLANARITY TOLERANCE
2 PITCHES
@ 2.540 = 5.08
(0.100 = 0.200)
15.00 (0.591)
7.62 +0.25 -0
(0.300 +0.010 -0)
0.670 (0.026)
REF TYP
0.19 (0.007)
TYP
1.00 (0.039)
TYP
PIN 1
PIN 1
HOW TO ORDER
00
Prefix
9162
Series
006
Number of Contacts
006
SIM Type
006 = Selective Gold,
Pure Tin Tail
080
Connector Height
080 = 0.8mm stack height
160 = 1.6mm stack height
240 = 2.4mm stack height
9162 SIM Card Block
20
