EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 1.9mm Round Subminiature Lead (Square Base) LED 95-21SURC/S530-XX/TRXX Features Package in 12mm tape on 7" diameter reels. Compatible with automatic placement equipment. EIA Std. package. Mono-color type. Pb-free The product itself will remain within RoHS F1 F2 95-21 F7/TR7 F9/TR9 F10/TR10 compliant version. Descriptions The 95-21 SMD taping is much smaller than leaded components . Thus enable smaller board size. Higher packing density. Reduced storage space and finally smaller equipment to be obtained. Besides, light weight makes them ideal for miniature applications. Furthermore by automation assembly machines the accuracy is anticipated. Applications Small indicator for indoor applications. Flat backlight for LCD, switches and symbols. Indicator and backlight in office equipment. Indicator and backlight for battery driven equipment. Indicator and backlight for audio and video equipment. Automotive : backlighting in dashboards and switches. Telecommunicationindicator and backlighting in telephone and fax. Device Selection Guide Part No. 95-21SURC/S530-XX/TRXX Chip Material Emitted Color Resin Color Brilliant Red Water Clear AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 1 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 2 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering:260 for 10 sec Hand Soldering:350 for 3 sec Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 3 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Electro-Optical Characteristics (Ta=25) Parameter Symbol Chip Rank A2 A3 IV Luminous Intensity A4 A5 A6 Unit MIN. TYP. MAX. ---- 29 ---- IF=2mA 198 482 ---- IF=20mA ---- 36 ---- IF=2mA 400 600 ---- IF=20mA ---- 49 ---- 550 820 ---- IF=20mA ---- 61 ---- IF=2mA 665 1020 ---- IF=20mA ---- 74 ---- IF=2mA 802 1232 ---- IF=20mA mcd 21/2 ---- ---- 25 ---- deg Peak Wavelength p ---- ---- 632 ---- nm Dominant Wavelength d ---- ---- 624 ---- nm Spectrum Radiation Bandwidth ---- ---- 20 ---- nm Forward Voltage VF ---- 1.7 2.0 2.4 V Reverse Current IR ---- ---- ---- 10 A Viewing Angle Condition IF=2mA IF=20mA VR=5V *95-21SURC/S530-XX / XXX 1 2 1:Chip Rank 2:Packing Method: (1) None,F1,F2, F7,F9,F10Bulk (2) TR7,TR9,TR10Taping Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 4 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 5 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank xxxxxx xxxxxx REF: Forward Voltage Rank RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel & Carrier Tape Dimensions Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 6 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Loaded quantity 1000 PCS per reel 1 95-21/TR7 95-21/TR9 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 7 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX 95-21/TR10 Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 8 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Ac/Re Hours/Cycles Size Temp. : 2605 6 Min. 22 Pcs. 0/1 1 Reflow Soldering Min. 5 sec. 2 3 4 5 Temperature Cycle H : +100 15 min. 5 min. L : -40 15 min. 300 Cycles 22 Pcs. 0/1 Thermal Shock H : +100 5 min. 10 sec. L : -10 5 min. 300 Cycles 22 Pcs. 0/1 Temp. : 100 1000 Hrs. 22 Pcs. 0/1 Temp. : -40 1000 Hrs. 22 Pcs. 0/1 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85/ 85% RH 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 9 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 10 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong EVERLIGHT ELECTRONICS CO.,LTD. 95-21SURC/S530-XX/TRXX 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Page: 11 of 11 Device No. : SZDLE-952-009 Prepared date: 11-17-2006 Prepared by: Aihua hong