74AC175, 74ACT175 Quad D-Type Flip-Flop tm Features General Description ICC reduced by 50% The AC/ACT175 is a high-speed quad D-type flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D-type inputs is stored during the LOW-toHIGH clock transition. Both true and complemented outputs of each flip-flop are provided. A Master Reset input resets all flip-flops, independent of the Clock or D-type inputs, when LOW. Edge-triggered D-type inputs Buffered positive edge-triggered clock Asynchronous common reset True and complement output Outputs source/sink 24mA ACT175 has TTL-compatible inputs Ordering Information Order Number Package Number Package Description 74AC175SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Body 74AC175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC175MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC175PC N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74ACT175SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Body 74ACT175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ACT175MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. Connection Diagram Pin Descriptions Pin Names Description D0-D3 Data Inputs CP Clock Pulse Input MR Master Reset Input Q0-Q3 True Outputs Q0-Q3 Complement Outputs FACTTM is a trademark of Fairchild Semiconductor Corporation. (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 74AC175, 74ACT175 Quad D-Type Flip-Flop April 2007 Functional Description The AC/ACT175 consists of four edge-triggered D-type flip-flops with individual D inputs and Q and Q outputs. The Clock and Master Reset are common. The four flipflops will store the state of their individual D inputs on the LOW-to-HIGH clock (CP) transition, causing individual Q and Q outputs to follow. A LOW input on the Master Reset (MR) will force all Q outputs LOW and Q outputs HIGH independent of Clock or Data inputs. The AC/ ACT175 is useful for general logic applications where a common Master Reset and Clock are acceptable. Truth Table IEEE/IEC Inputs @ tn, MR = H Outputs @ tn+1 Dn Qn Qn L L H H H L H = HIGH Voltage Level L = LOW Voltage Level tn = Bit Time before Clock Pulse tn+1 = Bit Time after Clock Pulse Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Figure 1. (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 2 74AC175, 74ACT175 Quad D-Type Flip-Flop Logic Symbol Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Parameter Rating Supply Voltage -0.5V to +7.0V DC Input Diode Current VI = -0.5V -20mA VI = VCC + 0.5V +20mA VI DC Input Voltage IOK DC Output Diode Current -0.5V to VCC + 0.5V VO = -0.5V -20mA VO = VCC + 0.5V +20mA VO DC Output Voltage -0.5V to VCC + 0.5V IO DC Output Source or Sink Current 50mA ICC or IGND DC VCC or Ground Current per Output Pin 50mA TSTG Storage Temperature -65C to +150C TJ Junction Temperature 140C Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage AC 2.0V to 6.0V ACT 4.5V to 5.5V VI Input Voltage VO Output Voltage TA Operating Temperature V / t Rating 0V to VCC 0V to VCC -40C to +85C Minimum Input Edge Rate, AC Devices: 125mV/ns VIN from 30% to 70% of VCC, VCC @ 3.3V, 4.5V, 5.5V V / t Minimum Input Edge Rate, ACT Devices: 125mV/ns VIN from 0.8V to 2.0V, VCC @ 4.5V, 5.5V (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 3 74AC175, 74ACT175 Quad D-Type Flip-Flop Absolute Maximum Ratings Symbol VIH Parameter VCC (V) Minimum HIGH Level Input Voltage 3.0 Maximum LOW Level Input Voltage 3.0 Minimum HIGH Level Output Voltage 3.0 TA = +25C Conditions VOUT = 0.1V or VCC - 0.1V 2.1 2.1 2.25 3.15 3.15 2.75 3.85 3.85 1.5 0.9 0.9 2.25 1.35 1.35 2.75 1.65 1.65 2.99 2.9 2.9 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 4.5 4.5 VOUT = 0.1V or VCC - 0.1V 5.5 VOH Guaranteed Limits 1.5 5.5 VIL Typ. TA = -40C to +85C IOUT = -50A Units V V V VIN = VIL or VIH: VOL Maximum LOW Level Output Voltage 3.0 IOH = -12mA 2.56 2.46 4.5 IOH = -24mA 3.86 3.76 4.86 4.76 0.002 0.1 0.1 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 0.36 0.44 -24mA(1) 5.5 IOH = 3.0 IOUT = 50A V VIN = VIL or VIH: 3.0 IOL = 12mA 4.5 IOL = 24mA 0.36 0.44 5.5 IOL = 24mA(1) 0.36 0.44 0.1 1.0 A IIN(3) Maximum Input Leakage Current 5.5 VI = VCC, GND IOLD Minimum Dynamic Output Current(2) 5.5 VOLD = 1.65V Max. 75 mA 5.5 VOHD = 3.85V Min. -75 mA Maximum Quiescent Supply Current 5.5 VIN = VCC or GND 40.0 A IOHD ICC (3) 4.0 Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0ms, one output loaded at a time. 3. IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 4 74AC175, 74ACT175 Quad D-Type Flip-Flop DC Electrical Characteristics for AC Symbol VIH VIL VOH Parameter VCC (V) Conditions Typ. TA = -40C to +85C Guaranteed Limits Units VOUT = 0.1V or VCC - 0.1V 1.5 2.0 2.0 1.5 2.0 2.0 VOUT = 0.1V or VCC - 0.1V 1.5 0.8 0.8 5.5 1.5 0.8 0.8 4.5 IOUT = -50A 4.49 4.4 4.4 5.49 5.4 5.4 3.86 3.76 4.86 4.76 0.001 0.1 0.1 0.001 0.1 0.1 0.36 0.44 0.36 0.44 0.1 1.0 A 1.5 mA 75 mA -75 mA 40.0 A Minimum HIGH Level Input Voltage 5.5 Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage TA = +25C 4.5 4.5 5.5 V V V VIN = VIL or VIH: 4.5 VOL Maximum LOW Level Output Voltage IOH = -24mA -24mA(4) 5.5 IOH = 4.5 IOUT = 50A 5.5 V VIN = VIL or VIH: 4.5 IOL= 24mA 24mA(4) 5.5 IOL= Maximum Input Leakage Current 5.5 VI = VCC, GND ICCT Maximum ICC/Input 5.5 VI = VCC - 2.1V IOLD Minimum Dynamic Output Current(5) 5.5 VOLD = 1.65V Max. 5.5 VOHD = 3.85V Min. Maximum Quiescent Supply Current 5.5 VIN = VCC or GND IIN IOHD ICC 0.6 4.0 Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time. (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 5 74AC175, 74ACT175 Quad D-Type Flip-Flop DC Electrical Characteristics for ACT TA = +25C, CL = 50pF Symbol fMAX tPLH tPHL tPLH tPHL TA = -40C to +85C, CL = 50pF VCC (V)(6) Min. Typ. 3.3 149 214 139 5.0 187 244 187 Propagation Delay, CP to Qn or Qn 3.3 2.0 9.5 12.0 2.0 13.5 5.0 1.5 7.0 9.0 1.0 9.5 Propagation Delay, CP to Qn or Qn 3.3 2.5 8.5 13.0 2.0 14.5 5.0 1.5 6.0 9.5 1.5 10.5 Propagation Delay, MR to Qn 3.3 3.0 7.5 12.5 2.5 13.5 5.0 2.0 5.5 9.0 1.5 10.0 Propagation Delay, MR to Qn 3.3 3.0 8.5 11.0 2.5 12.5 5.0 2.0 6.0 8.5 1.5 9.0 Parameter Maximum Clock Frequency Max. Min. Max. Units MHz ns ns ns ns Note: 6. Voltage range 3.3 is 3.3V 0.3V. Voltage range 5.0 is 5.0V 0.5V. AC Operating Requirements for AC TA = +25C, CL = 50pF Symbol tS tH tW tW tREC TA = -40C to +85C, CL = 50pF VCC (V)(7) Typ. Setup Time, HIGH or LOW, Dn to CP 3.3 2.0 4.5 4.5 5.0 1.0 3.0 3.0 Hold Time, HIGH or LOW, Dn to CP 3.3 1.0 1.0 1.0 5.0 1.0 1.0 1.0 CP Pulse Width, HIGH or LOW 3.3 2.5 4.5 4.5 5.0 2.0 3.5 3.5 MR Pulse Width, LOW 3.3 2.5 4.5 5.0 5.0 2.0 3.5 3.5 Parameter Recovery Time, MR to CP Guaranteed Minimum 3.3 -2.0 0 0 5.0 -1.0 0 0 Units ns ns ns ns ns Note: 7. Voltage range 3.3 is 3.3V 0.3V. Voltage range 5.0 is 5.0V 0.5V. (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 6 74AC175, 74ACT175 Quad D-Type Flip-Flop AC Electrical Characteristics for AC TA = +25C, CL = 50pF Symbol Parameter VCC (V)(8) Min. Typ. TA = -40C to +85C, CL = 50pF Max. Min. Max. 145 Units fMAX Maximum Clock Frequency 5.0 175 236 MHz tPLH Propagation Delay, CP to Qn or Qn 5.0 2.0 6.0 10.0 1.5 11.0 ns tPHL Propagation Delay, CP to Qn or Qn 5.0 2.0 7.0 11.0 1.5 12.0 ns tPLH Propagation Delay, MR to Qn 5.0 2.0 6.0 9.5 1.5 10.5 ns tPHL Propagation Delay, MR to Qn 5.0 2.0 5.5 9.5 1.5 10.5 ns Note: 8. Voltage Range 5.0 is 5.0V 0.5V. AC Operating Requirements for ACT TA = +25C, CL = 50pF Symbol tS (H) Parameter VCC (V)(9) Setup Time, Dn to CP Typ. 5.0 tS (L) TA = -40C to +85C, CL = 50pF Guaranteed Minimum 3.0 2.0 2.0 3.0 2.5 2.5 0 1.0 1.0 Units ns tH Hold Time, HIGH or LOW, Dn to CP tW CP Pulse Width,HIGH or LOW 5.0 4.0 3.0 3.5 ns tW MR Pulse Width, LOW 5.0 4.0 3.0 4.0 ns trec Recovery Time, MR to CP 5.0 0 0 0 ns 5.0 ns Note: 9. Voltage Range 5.0 is 5.0V 0.5V. Capacitance Symbol Parameter Conditions Typ. Units CIN Input Capacitance VCC = OPEN 4.5 pF CPD Power Dissipation Capacitance VCC = 5.0V 45.0 pF (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 7 74AC175, 74ACT175 Quad D-Type Flip-Flop AC Electrical Characteristics for ACT 74AC175, 74ACT175 Quad D-Type Flip-Flop Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 2. 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 8 74AC175, 74ACT175 Quad D-Type Flip-Flop Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 3. 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 9 5.000.10 4.55 5.90 4.45 7.35 0.65 4.40.1 1.45 5.00 0.11 12 MTC16rev4 Figure 4. 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 10 74AC175, 74ACT175 Quad D-Type Flip-Flop Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. 74AC175, 74ACT175 Quad D-Type Flip-Flop Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure 5. 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 11 (R) ACEx Across the board. Around the world. ActiveArray Bottomless Build it Now CoolFET CROSSVOLT CTLTM Current Transfer LogicTM DOME 2 E CMOS (R) EcoSPARK EnSigna FACT Quiet SeriesTM (R) FACT (R) FAST FASTr FPS (R) FRFET GlobalOptoisolator GTO HiSeC i-Lo ImpliedDisconnect IntelliMAX ISOPLANAR MICROCOUPLER MicroPak MICROWIRE MSX MSXPro OCX OCXPro (R) OPTOLOGIC (R) OPTOPLANAR PACMAN POP (R) Power220 (R) Power247 PowerEdge PowerSaver (R) PowerTrench Programmable Active Droop (R) QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect ScalarPump SMART START (R) SPM STEALTHTM SuperFET SuperSOT-3 SuperSOT-6 SuperSOT-8 SyncFETTM TCM (R) The Power Franchise (R) TinyLogic TINYOPTO TinyPower TinyWire TruTranslation PSerDes (R) UHC UniFET VCX Wire TM TinyBoost TinyBuck DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Definition Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I24 (c)1988 Fairchild Semiconductor Corporation 74AC175, 74ACT175 Rev. 1.4 www.fairchildsemi.com 12 74AC175, 74ACT175 Quad D-Type Flip-Flop TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.