WLS28XW990XPB - BANNER ENGINEERING

General-purpose LED work lighting for IP50 and IP67/IP69K

environments

For the latest technical information about this product, including specifications, dimensions, and wiring, see

www.bannerengineering.com.

Features

• High power solid state LED array

• Designed for enclosure or area lighting

• Rugged aluminum housing

• Narrow 28 mm total width

• Lighted lengths available from 145 mm to 1130 mm

• Low-profile design with included swivel mounting brackets

• Illuminates a large area with an even pattern of light and no

shadows

• 12 to 30V dc operation

• Cabled and Quick Disconnect models available

• Stand-alone and cascadable models available

• IP50 and IP67/IP69K models available

• IP50 models available with or without ON/OFF switch

• Low power consumption; less than 9 watts per foot

• Lensed model - provides 2X the illumination focused to where it is

needed

NOTE: When cascading lights, a model with an ON/OFF

switch can be used to control the lights cascaded off of

the switched model.

Work Light Strip Models

Stand-Alone Light—cable Stand-Alone Light or End Light in a Cascade—QD

First Light in a Cascade—cable First or Middle of a Cascade—QD

WLS28 Work Light Strips are available as either stand-alone models, or as cascade models that can be "daisy-chained"

together for a continuous length of lighting, with a minimum of wiring.

Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A

stand-alone model may be used as the last in the cascade series.

Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for

connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade

series. A double-ended accessory cordset (see Cordsets on page 5) must be used between each pair of lights in a

cascade.

WLS28 Work Light Strip

Original Document

154514 Rev. G 19 August 2014

154514

Table 1: IP50 Models

Non-Switch Models ON/OFF Switch Models Lighted

Length Power

Connector*

Stand-Alone Cascade Stand-Alone Cascade

WLS28XW145X WLS28CW145X WLS28XW145XPB WLS28CW145XPB 145 mm

2 m cable

WLS28XW285X WLS28CW285X WLS28XW285XPB WLS28CW285XPB 285 mm

WLS28XW430X WLS28CW430X WLS28XW430XPB WLS28CW430XPB 430 mm

WLS28XW570X WLS28CW570X WLS28XW570XPB WLS28CW570XPB 570 mm

WLS28XW710X WLS28CW710X WLS28XW710XPB WLS28CW710XPB 710 mm

WLS28XW850X WLS28CW850X WLS28XW850XPB WLS28CW850XPB 850 mm

WLS28XW990X WLS28CW990X WLS28XW990XPB WLS28CW990XPB 990 mm

WLS28XW1130X WLS28CW1130X WLS28XW1130XPB WLS28CW1130XPB 1130 mm

*Only cabled power connector models are listed. For 4-pin M12/Euro-style integral power connector, add suffix Q to the

model number (for example, WLS28XW285XQ).

Table 2: IP67/IP69K Models

Models Lighted Length Power Connector*

Stand-Alone Cascade

WLS28XW145S WLS28CW145S 145 mm

2 m cable

WLS28XW285S WLS28CW285S 285 mm

WLS28XW430S WLS28CW430S 430 mm

WLS28XW570S WLS28CW570S 570 mm

WLS28XW710S WLS28CW710S 710 mm

WLS28XW850S WLS28CW850S 850 mm

WLS28XW990S WLS28CW990S 990 mm

WLS28XW1130S WLS28CW1130S 1130 mm

*Only cabled power connector models are listed. For 4-pin M12/Euro-style integral power connector, add suffix Q to the

model number (for example, WLS28XW285SQ).

WLS28 Work Light Strip

2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 154514 Rev. G

Specifications

Supply Voltage and Current

12 to 30 V dc (10% max. ripple)

Use only with suitable Class 2 power supply.

Max current and power per length:

Lumens* (Typical @ 25° C)

145 mm 0.5A 0.25A 0.2A 6 180 126 60 114 36

BluYelRedGrn

Wrm

Wht

Cool

Wht

360 252 120 228 72

540 378 180 342 108

720 504 240 456 144

900 630 300 570 180

1080 756 360 684 216

1260 882 420 798 252

1440

225

450

675

900

1125

1350

1575

1800 1008 480 912 288

285 mm 0.75A 0.375A 0.3A 9

430 mm 1.25A 0.625A 0.5A 15

570 mm 1.5A 0.75A 0.6A 18

710 mm 2.0A 1.0A 0.8A 24

850 mm 2.25A 1.125A 0.9A 27

990 mm 2.75A 1.375A 1.1A 33

1130 mm

* Lumen values lowered by 35% on diffused window models

3.0A 1.5A 1.2A 36

Light

Length 12V dc 24V dc 30V dc Watts

Light Characteristics

Color Temperature and Wavelengths

Cool White: 5300–7000K

Warm White: 2600–4300K

Green: 520–535 nm

Red: 620–630 nm

Yellow: 585–595 nm

Blue: 460–475 nm

Useful Life

When operating within specifications, output will decrease less than

30% after 50,000 hours.

Construction

Clear anodized aluminum housing; painted zinc end caps; acrylic

window; zinc plated steel brackets

Mounting

(2) swivel brackets SMBWLS28RA included and (4) screws

Environmental Rating

IEC IP50 (non-sealed models) or IEC IP67/IP69K per DIN 40050

(sealed models)

Connections

Integral 4-pin Euro-style QD (4-pin connecting cordset required for QD

models); or 2 m (6.5 ft) integral cable

Operating Temperature

−20 °C to +50 °C (−4 °F to +122 °F)

Storage Temperature

−40 °C to +70 °C (−40 °F to +158 °F)

Certifications

L25 models: UL pending

Application Notes

When connecting cascadable lights in series it is important not to

exceed maximum current limitations:

Maximum length of light at 12 V dc: 1.5 m (4.9 ft)

Maximum length of light at 24 V dc: 3.0 m (9.8 ft)

Maximum length of light at 30 V dc: 3.1 m (10.2 ft)

Maximum Ambient Operating Temperature for inside the

cabinet of 50°C

NOTE: Do not spray cable with high-pressure sprayer, or cable damage will result.

WLS28 Work Light Strip

P/N 154514 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 3

Dimensions

14.0 mm

[0.55”]

32.2 mm

[1.27”] 21 mm

[0.83”]

28 mm

[1.10”]

13.5 mm

[0.53”] 28 mm

[1.10”]

L25 Models

14.7 mm dia

[0.58”]

M3 x 0.50 ISO (4x)

20.8 mm

[0.82”]

7.5 mm

[0.30”]

8 mm

[0.31”]

30 mm

[1.18”]

19 mm

[0.75”]

9.5 mm

[0.37”]

5 mm dia

[0.20”]

31.5 mm

[1.24”]

10.5 mm

[0.41”]

Dimensions are shown with included SMBWLS28RA bracket

Non-Switch Models

IP50 Models IP67/IP69K Models L1L2L3L4

WLS28..145X WLS28..145S 221 mm (8.7 in) 205 mm (8.1 in) 145 mm (5.71 in) 175 mm (6.9 in)

WLS28..285X WLS28..285S 362 mm (14.3 in) 346 mm (13.6 in) 286 mm (11.26 in) 316 mm (12.4 in)

WLS28..430X WLS28..430S 503 mm (19.8 in) 487 mm (19.2 in) 427 mm (16.81 in) 457 mm (18.0 in)

WLS28..570X WLS28..570S 644 mm (25.4 in) 628 mm (24.7 in) 568 mm (22.36 in) 598 mm (23.5 in)

WLS28..710X WLS28..710S 785 mm (30.9 in) 769 mm (30.3 in) 709 mm (27.91 in) 739 mm (29.1 in)

WLS28..850X WLS28..850S 926 mm (36.5 in) 910 mm (35.8 in) 850 mm (33.46 in) 880 mm (34.6 in)

WLS28..990X WLS28..990S 1067 mm (42 in) 1051 mm (41.4 in) 991 mm (39.02 in) 1021 mm (40.2 in)

WLS28..1130X WLS28..1130S 1208 mm (47.6 in) 1192 mm (46.9 in) 1132 mm (44.57 in) 1162 mm (45.7 in)

ON/OFF Switch Models

Model L1L2L3L4

WLS28..145XPB 251 mm (9.9 in) 235 mm (9.3 in) 145 mm (5.71 in) 205 mm (8.1 in)

WLS28..285XPB 392 mm (15.4 in) 376 mm (14.8 in) 286 mm (11.26 in) 346 mm (13.6 in)

WLS28..430XPB 533 mm (21.0 in) 517 mm (20.4 in) 427 mm (16.81 in) 487 mm (19.2 in)

WLS28..570XPB 674 mm (26.5 in) 658 mm (25.9 in) 568 mm (22.36 in) 628 mm (24.7 in)

WLS28..710XPB 815 mm (32.1 in) 799 mm (31.5 in) 709 mm (27.91 in) 769 mm (30.3 in)

WLS28..850XPB 956 mm (37.6 in) 940 mm (37 in) 850 mm (33.46 in) 910 mm (35.8 in)

WLS28..990XPB 1097 mm (43.2 in) 1081 mm (42.6 in) 991 mm (39.02 in) 1051 mm (41.4 in)

WLS28..1130XPB 1238 mm (48.7 in) 1222 mm (48.1 in) 1132 mm (44.57 in) 1192 mm (46.9 in)

WLS28 Work Light Strip

4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 154514 Rev. G

Wiring

12–30 V dc

−

Female

Male

Wiring Key:

1 = Brown

3 = Blue

Accessories

Cordsets

Single-ended cordsets are for use between power source and QD connection of stand-alone light or first light in a cascade.

Double-ended cordsets are for use between lights in a cascade.

Single-Ended Cordsets

4-Pin Threaded M12/Euro-Style Cordsets

Model Length Style Dimensions Pinout

MQDC-406 1.83 m (6 ft)

Straight

44 Typ.

ø 14.5

M12 x 1

1 = Brown

2 = White

3 = Blue

4 = Black

MQDC-415 4.57 m (15 ft)

MQDC-430 9.14 m (30 ft)

MQDC-450 15.2 m (50 ft)

MQDC-406RA 1.83 m (6 ft)

Right-Angle

32 Typ.

[1.26"]

30 Typ.

[1.18"]

ø 14.5 [0.57"]

M12 x 1

MQDC-415RA 4.57 m (15 ft)

MQDC-430RA 9.14 m (30 ft)

MQDC-450RA 15.2 m (50 ft)

Double-Ended Cordsets

WLS28 Work Light Strip

P/N 154514 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 5

4-Pin Threaded M12/Euro-Style Cordsets―Double Ended

Model Length Style Dimensions Pinout

MQDEC-401SS 0.31 m (1 ft)

Male Straight/

Female Straight

40 Typ.

[1.58"]

ø 14.5 [0.57"]

M12 x 1

44 Typ.

[1.73"]

ø 14.5 [0.57"]

M12 x 1

1 = Brown

2 = White

3 = Blue

4 = Black

MQDEC-403SS 0.91 m (3 ft)

MQDEC-406SS 1.83 m (6 ft)

MQDEC-412SS 3.66 m (12 ft)

MQDEC-420SS 6.10 m (20 ft)

MQDEC-430SS 9.14 m (30 ft)

MQDEC-450SS 15.2 m (50 ft)

Splitter Cordsets

4-Pin Threaded M12/Euro-Style Splitter Cordsets ― Flat Junction

Model Branches

(Female) Trunk (Male) Dimensions Pinout

CSB-M1240M1240 No branch No trunk

44 Typ.

[1.73"]

43.0

[1.69"]

Ø14.5 [0.57"]

M12 x 1

Ø14.5 [0.57"]

40 Typ.

[1.58"]

18.0

[0.71"]

Ø4.5

[0.18"]

35 [1.38"]

M12 x 1

1 = Brown

2 = White

3 = Blue

4 = Black

CSB-M1240M1241

2 x 0.30 m

(1 ft)

No trunk

CSB-M1241M1241 0.30 m (1 ft)

CSB-M1248M1241 2.50 m (8 ft)

CSB-M12415M1241 4.57 m (15 ft)

CSB-M12425M1241 7.60 m (25 ft)

CSB-UNT425M1241 7.60 m (25 ft)

Unterminated

Replacement Bracket and Unistrut Mounting Hardware

SMBWLS28RA

The bracket kit is available

as a replacement for the one

that comes with the Work

Light Strip. The kit contains

two end brackets and four

screws.

SMBWLS28SM

This kit allows the light to be

mounted at a right angle to

the mounting surface. The

kit contains two end

brackets and four screws.

WLS28 Work Light Strip

6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 154514 Rev. G

SMH1316

This kit allows the light to be

mounted to a 13/16-inch

Unistrut channel. The kit

includes:

• #10-32 spring nuts

(qty 2)

• #10-32 socket head

cap screws (qty 2)

• #10 lock washers

(qty 2)

SMBWLSMAG

Magnetic mounting bracket

for easy attachment to

steel surfaces

SMBWLSMAGR

Protective cover also

available to prevent

scratches to painted

surfaces

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following

the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture

which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty

does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR

IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR

TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO

EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR

ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE

PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,

NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any

obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.

WLS28 Work Light Strip