WLS28 Work Light Strip General-purpose LED work lighting for IP50 and IP67/IP69K environments For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com. Features * * * * * * * * * * * * * * High power solid state LED array Designed for enclosure or area lighting Rugged aluminum housing Narrow 28 mm total width Lighted lengths available from 145 mm to 1130 mm Low-profile design with included swivel mounting brackets Illuminates a large area with an even pattern of light and no shadows 12 to 30V dc operation Cabled and Quick Disconnect models available Stand-alone and cascadable models available IP50 and IP67/IP69K models available IP50 models available with or without ON/OFF switch Low power consumption; less than 9 watts per foot Lensed model - provides 2X the illumination focused to where it is needed NOTE: When cascading lights, a model with an ON/OFF switch can be used to control the lights cascaded off of the switched model. Work Light Strip Models Stand-Alone Light--cable Stand-Alone Light or End Light in a Cascade--QD First Light in a Cascade--cable First or Middle of a Cascade--QD WLS28 Work Light Strips are available as either stand-alone models, or as cascade models that can be "daisy-chained" together for a continuous length of lighting, with a minimum of wiring. Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone model may be used as the last in the cascade series. Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-ended accessory cordset (see Cordsets on page 5) must be used between each pair of lights in a cascade. Original Document 154514 Rev. G 19 August 2014 154514 WLS28 Work Light Strip Table 1: IP50 Models ON/OFF Switch Models Non-Switch Models Stand-Alone Cascade Stand-Alone Cascade Lighted Length WLS28XW145X WLS28CW145X WLS28XW145XPB WLS28CW145XPB 145 mm WLS28XW285X WLS28CW285X WLS28XW285XPB WLS28CW285XPB 285 mm WLS28XW430X WLS28CW430X WLS28XW430XPB WLS28CW430XPB 430 mm WLS28XW570X WLS28CW570X WLS28XW570XPB WLS28CW570XPB 570 mm WLS28XW710X WLS28CW710X WLS28XW710XPB WLS28CW710XPB 710 mm WLS28XW850X WLS28CW850X WLS28XW850XPB WLS28CW850XPB 850 mm WLS28XW990X WLS28CW990X WLS28XW990XPB WLS28CW990XPB 990 mm WLS28XW1130X WLS28CW1130X WLS28XW1130XPB WLS28CW1130XPB Power Connector* 2 m cable 1130 mm *Only cabled power connector models are listed. For 4-pin M12/Euro-style integral power connector, add suffix Q to the model number (for example, WLS28XW285XQ). Table 2: IP67/IP69K Models Models Lighted Length Stand-Alone Cascade WLS28XW145S WLS28CW145S 145 mm WLS28XW285S WLS28CW285S 285 mm WLS28XW430S WLS28CW430S 430 mm WLS28XW570S WLS28CW570S 570 mm WLS28XW710S WLS28CW710S 710 mm WLS28XW850S WLS28CW850S 850 mm WLS28XW990S WLS28CW990S 990 mm WLS28XW1130S WLS28CW1130S Power Connector* 2 m cable 1130 mm *Only cabled power connector models are listed. For 4-pin M12/Euro-style integral power connector, add suffix Q to the model number (for example, WLS28XW285SQ). 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 154514 Rev. G WLS28 Work Light Strip Specifications Supply Voltage and Current 12 to 30 V dc (10% max. ripple) Use only with suitable Class 2 power supply. Max current and power per length: Lumens* (Typical @ 25 C) Light Length 12V dc 24V dc 30V dc 145 mm 0.5A 0.25A 0.2A 6 Cool Wrm Wht Wht Grn 225 180 126 285 mm 0.75A 0.375A 0.3A 9 450 360 430 mm 1.25A 0.625A 0.5A 15 675 570 mm 1.5A 0.75A 0.6A 18 900 710 mm 2.0A 1.0A 0.8A 850 mm 2.25A 1.125A 990 mm 2.75A 1130 mm 3.0A Red Yel Blu 60 114 36 252 120 228 72 540 378 180 342 108 720 504 240 456 144 24 1125 900 630 300 570 180 0.9A 27 1350 1080 756 360 684 216 1.375A 1.1A 33 1575 1260 882 420 798 252 1.5A 1.2A 36 1800 1440 1008 480 912 288 Watts * Lumen values lowered by 35% on diffused window models Light Characteristics Color Temperature and Wavelengths Cool White: 5300-7000K Warm White: 2600-4300K Green: 520-535 nm Red: 620-630 nm Yellow: 585-595 nm Blue: 460-475 nm Environmental Rating IEC IP50 (non-sealed models) or IEC IP67/IP69K per DIN 40050 (sealed models) Connections Integral 4-pin Euro-style QD (4-pin connecting cordset required for QD models); or 2 m (6.5 ft) integral cable Useful Life When operating within specifications, output will decrease less than 30% after 50,000 hours. Construction Clear anodized aluminum housing; painted zinc end caps; acrylic window; zinc plated steel brackets Mounting (2) swivel brackets SMBWLS28RA included and (4) screws Operating Temperature -20 C to +50 C (-4 F to +122 F) Storage Temperature -40 C to +70 C (-40 F to +158 F) Certifications L25 models: UL pending Application Notes When connecting cascadable lights in series it is important not to exceed maximum current limitations: Maximum length of light at 12 V dc: 1.5 m (4.9 ft) Maximum length of light at 24 V dc: 3.0 m (9.8 ft) Maximum length of light at 30 V dc: 3.1 m (10.2 ft) Maximum Ambient Operating Temperature for inside the cabinet of 50C NOTE: Do not spray cable with high-pressure sprayer, or cable damage will result. P/N 154514 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 3 WLS28 Work Light Strip Dimensions 14.0 mm [0.55"] 8 mm [0.31"] 28 mm [1.10"] 32.2 mm [1.27"] 21 mm [0.83"] 13.5 mm [0.53"] 9.5 mm [0.37"] 28 mm [1.10"] 19 mm 30 mm [0.75"] [1.18"] 5 mm dia [0.20"] L25 Models 14.7 mm dia [0.58"] 7.5 mm [0.30"] 31.5 mm [1.24"] M3 x 0.50 ISO (4x) 20.8 mm [0.82"] 10.5 mm [0.41"] Dimensions are shown with included SMBWLS28RA bracket Non-Switch Models IP50 Models IP67/IP69K Models L1 L2 L3 L4 WLS28..145X WLS28..145S 221 mm (8.7 in) 205 mm (8.1 in) 145 mm (5.71 in) 175 mm (6.9 in) WLS28..285X WLS28..285S 362 mm (14.3 in) 346 mm (13.6 in) 286 mm (11.26 in) 316 mm (12.4 in) WLS28..430X WLS28..430S 503 mm (19.8 in) 487 mm (19.2 in) 427 mm (16.81 in) 457 mm (18.0 in) WLS28..570X WLS28..570S 644 mm (25.4 in) 628 mm (24.7 in) 568 mm (22.36 in) 598 mm (23.5 in) WLS28..710X WLS28..710S 785 mm (30.9 in) 769 mm (30.3 in) 709 mm (27.91 in) 739 mm (29.1 in) WLS28..850X WLS28..850S 926 mm (36.5 in) 910 mm (35.8 in) 850 mm (33.46 in) 880 mm (34.6 in) WLS28..990X WLS28..990S 1067 mm (42 in) 1051 mm (41.4 in) 991 mm (39.02 in) 1021 mm (40.2 in) WLS28..1130X WLS28..1130S 1208 mm (47.6 in) 1192 mm (46.9 in) 1132 mm (44.57 in) 1162 mm (45.7 in) ON/OFF Switch Models Model L1 L2 L3 L4 WLS28..145XPB 251 mm (9.9 in) 235 mm (9.3 in) 145 mm (5.71 in) 205 mm (8.1 in) WLS28..285XPB 392 mm (15.4 in) 376 mm (14.8 in) 286 mm (11.26 in) 346 mm (13.6 in) WLS28..430XPB 533 mm (21.0 in) 517 mm (20.4 in) 427 mm (16.81 in) 487 mm (19.2 in) WLS28..570XPB 674 mm (26.5 in) 658 mm (25.9 in) 568 mm (22.36 in) 628 mm (24.7 in) WLS28..710XPB 815 mm (32.1 in) 799 mm (31.5 in) 709 mm (27.91 in) 769 mm (30.3 in) WLS28..850XPB 956 mm (37.6 in) 940 mm (37 in) 850 mm (33.46 in) 910 mm (35.8 in) WLS28..990XPB 1097 mm (43.2 in) 1081 mm (42.6 in) 991 mm (39.02 in) 1051 mm (41.4 in) WLS28..1130XPB 1238 mm (48.7 in) 1222 mm (48.1 in) 1132 mm (44.57 in) 1192 mm (46.9 in) 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 154514 Rev. G WLS28 Work Light Strip Wiring Female 1 1 Wiring Key: 1 = Brown 3 = Blue + 12-30 V dc 3 3 Male 1 - 3 Accessories Cordsets Single-ended cordsets are for use between power source and QD connection of stand-alone light or first light in a cascade. Double-ended cordsets are for use between lights in a cascade. Single-Ended Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Style Dimensions Pinout 44 Typ. 2 1 Straight 1 2 3 4 32 Typ. [1.26"] 3 4 M12 x 1 o 14.5 = = = = Brown White Blue Black 30 Typ. [1.18"] Right-Angle M12 x 1 o 14.5 [0.57"] Double-Ended Cordsets P/N 154514 Rev. G www.bannerengineering.com - Tel: +1-763-544-3164 5 WLS28 Work Light Strip 4-Pin Threaded M12/Euro-Style CordsetsDouble Ended Model Length MQDEC-401SS 0.31 m (1 ft) Style MQDEC-403SS 0.91 m (3 ft) MQDEC-406SS 1.83 m (6 ft) MQDEC-412SS 3.66 m (12 ft) MQDEC-420SS 6.10 m (20 ft) MQDEC-430SS 9.14 m (30 ft) MQDEC-450SS 15.2 m (50 ft) Dimensions Pinout 40 Typ. [1.58"] 2 1 3 4 M12 x 1 o 14.5 [0.57"] Male Straight/ Female Straight 44 Typ. [1.73"] 1 2 4 3 1 2 3 4 M12 x 1 o 14.5 [0.57"] = = = = Brown White Blue Black Splitter Cordsets 4-Pin Threaded M12/Euro-Style Splitter Cordsets Flat Junction Model Branches (Female) Trunk (Male) CSB-M1240M1240 No branch No trunk CSB-M1240M1241 No trunk CSB-M1241M1241 0.30 m (1 ft) CSB-M1248M1241 2.50 m (8 ft) CSB-M12415M1241 4.57 m (15 ft) CSB-M12425M1241 2 x 0.30 m (1 ft) CSB-UNT425M1241 7.60 m (25 ft) Dimensions Pinout O4.5 [0.18"] 40 Typ. [1.58"] 18.0 [0.71"] 3 4 44 Typ. [1.73"] O14.5 [0.57"] O14.5 [0.57"] M12 x 1 M12 x 1 7.60 m (25 ft) Unterminated 2 1 35 [1.38"] 43.0 [1.69"] 1 2 4 3 1 2 3 4 = = = = Brown White Blue Black Replacement Bracket and Unistrut Mounting Hardware SMBWLS28RA SMBWLS28SM The bracket kit is available as a replacement for the one that comes with the Work Light Strip. The kit contains two end brackets and four screws. This kit allows the light to be mounted at a right angle to the mounting surface. The kit contains two end brackets and four screws. 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 154514 Rev. G WLS28 Work Light Strip SMH1316 SMBWLSMAG This kit allows the light to be mounted to a 13/16-inch Unistrut channel. The kit includes: Magnetic mounting bracket for easy attachment to steel surfaces * * * #10-32 spring nuts (qty 2) #10-32 socket head cap screws (qty 2) #10 lock washers (qty 2) SMBWLSMAGR Protective cover also available to prevent scratches to painted surfaces Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - Tel: +1-763-544-3164