SPECIFICATION CONTROL DRAWING Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] D-150-9133 ROUGHNESS IN MICRON Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. DOC. ISSUE: CAGE CODE: REPLACES: PROD. REV.: TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A DRAWN BY: M. FORONDA Raychem Hi-Spec Flexible Bus Cable Joint MIL-STD-1553B Lightweight System 06090 N/A DCR NUMBER: D000423 If this document is printed it becomes uncontrolled. Check for the latest revision. DATE: 1 F 27-Sept-00 SCALE: None SIZE: A SHEET: 1 of 2 MATERIALS 1. SEALING SLEEVE: High temperature fluid stabilized cross-linked elastomer to Specification RK-6008. Color: black. 2. MELTABLE RINGS: Modified stabilized elastomer-fluoropolymer thermoplastic. 3. BRAID: Solder impregnated, flux coated, tin plated copper wire braid. SOLDER: TYPE Sn96 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 4. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 5. SOLDER PREFORM: SOLDER: TYPE Sn96 per ANSI J-STD-006. 6. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 7. CRIMP: Copper Alloy 102 per ASTM B75. Tin plated per MIL-T-10727 Type T. Red stripe code. APPLICATION 1. This flexible cable joint is designed to facilitate the assembly or maintenance of pre-cabled digital harness components for MIL-STD-1553B networks. It should be used where continuous flexing is not a functional requirement. 2. Cables to be joined, Raychem 10612, 10613, 10614. 3. Minimum bend radius; Static: 80mm. Dynamic: not recommended. 4. Temperature range: -65C to +150C. Brief excursions to 200C permissible without degradation. 5. Designed to meet performance requirements of Raychem Specification HPDS-0519. 6. For installation procedure and tooling, see RPIP-600-12. DRAWN BY: M. FORONDA CAGE CODE: 06090 REPLACES: N/A DCR NUMBER: D000423 If this document is printed it becomes uncontrolled. Check for the latest revision. PROD. REV.: F SCALE: None SIZE: A SHEET: 2 of 2