AS186-302LF - SKYWORKS SOLUTIONS

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200104 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 17, 2007 1

AS186-302, AS186-302LF: GaAs IC High-Isolation Positive

Control SPDT Nonreflective Switch LF–4 GHz

DATA SHEET

Applications

●Typical applications include GSM, PCS, WCDMA, 2.4 GHz ISM

and 3.5 GHz wireless local loop

Features

●Positive voltage control (0/3 to 0/5 V)

●High isolation (55 dB @ 0.9 GHz and 1.9 GHz)

●Miniature MSOP-8 exposed pad package

●Three-switch solution for base station synthesizer switch

●Nonreflective

●Operation to 6 GHz

●Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C

per JEDEC J-STD-020

Description

The AS186-302 is a GaAs FET IC SPDT nonreflective switch,

packaged in an MSOP-8 exposed pad plastic package for low-

cost, high-isolation commercial applications.

GND

CBL

1 2 3 4

8 7 6 5

CBL = 47 pF for operation > 500 MHz.

Pin Out

Parameter Condition Frequency Min. Typ. Max. Unit

Insertion loss LF–2 GHz 0.8 1.05 dB

LF–3 GHz 0.9 1.15 dB

LF–4 GHz 1.0 1.25 dB

Isolation(1) LF–2 GHz 50 55 dB

LF–3 GHz 45 50 dB

LF–4 GHz 35 40 dB

VSWR (on state) LF–2 GHz 1.3:1 1.5:1

LF–4 GHz 1.3:1 1.6:1

VSWR (off state) 0.5–4 GHz 1.35:1 1.7:1

Electrical Specifications

-40 °C ≤T≤+85 °C, VCTL = 0/5 V, Z0= 50 Ωunless otherwise noted

1. Backside of exposed pad must be connected to RF ground to obtain specified isolation.

Skyworks offers lead (Pb)-free, RoHS (Restriction of

Hazardous Substances)-compliant packaging.

NEW

Innovation to GoTM

Now available for purchase online.

BUY

NOW

BUY

NOW

Insertion Loss vs. Frequency

01 23 45 6

Frequency (GHz)

Insertion Loss (dB)

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

J1–J2

J1–J3

Typical Performance Data (0, 5 V)

Insertion Loss vs. Frequency

-40, 25, 85 ˚C

0123 456

Frequency (GHz)

Insertion Loss (dB)

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

-40 ˚C 25 ˚C

85 ˚C

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

October 17, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200104 Rev. D

DATA SHEET • AS186-302, AS186-302LF

Parameter Condition Frequency Min. Typ. Max. Unit

Switching characteristics

Rise, fall 10/90% or 90/10% RF 30 ns

On, off 50% CTL to 90/10% RF 50 ns

Video feedthru TRISE = 3 ns, BW = 500 MHz 25 mV

Input power for 1 dB compression VCTL = 0/3 V 0.9–4 GHz 23 25 dBm

VCTL = 0/5 V 0.9–4 GHz 27 30 dBm

Input 3rd order intermodulation For two-tone input power 8 dBm

intercept point (IIP3) VCTL = 0/3 V 0.9–4 GHz 27 38 dBm

VCTL = 0/5 V 0.9–4 GHz 42 46 dBm

Thermal resistance 25 °C/W

ESD rating Human body model Class 1A

Control voltages VLOW = 0 to 0.2 V @ 20 µA max.

VHIGH = 3 V @ 100 µA max. to 5 V @ 200 µA max.

Operating Characteristics

-40 °C ≤T≤+85 C, VCTL = 0/5 V, Z0= 50 Ωunless otherwise noted

DATA SHEET • AS186-302, AS186-302LF

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200104 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 17, 2007 3

Isolation vs. Frequency

01 2 3 45 6

Frequency (GHz)

Isolation (dB)

-70

-60

-50

-40

-30

-20

-10

J1–J2

J1–J3

Isolation vs. Frequency

-40, 25, 85 ˚C

01 2 3 45 6

Frequency (GHz)

Isolation (dB)

-70

-60

-50

-40

-30

-20

-10

-40 ˚C

25 ˚C

85 ˚C

0123456

Frequency (GHz)

VSWR vs. Frequency

1.00

1.25

1.50

1.75

2.00

2.25

2.50

VSWR

J2On

J3Off

J3On

0123456

Frequency (GHz)

VSWR vs Frequency

-40, 25, 85 °C (J3Off)

1.00

1.25

1.50

1.75

2.00

2.25

2.50

VSWR

-40 °C

25 °C

85 °C

0123456

Frequency (GHz)

Input VSWR vs Frequency

-40, 25, 85 °C

1.00

1.25

1.50

1.75

2.00

2.25

2.50

VSWR

-40 °C

25 °C

85°C

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

October 17, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200104 Rev. D

DATA SHEET • AS186-302, AS186-302LF

Frequency: 900 MHz.

Tone frequencies: 900 and 901 MHz.

V1V2J1–J2J1–J3

HIGH Isolation Insertion loss

VHIGH 0 Insertion loss Isolation

Truth Table

All other conditions not recommended.

VHIGH = 3 V to 5 V.

Characteristic Value

RF input power 1 W max. for f > 500 MHz

100 mW for f < 500 MHz

VCTL = 0/8 V

Control voltage -0.2 V, +8 V

Operating temperature -40 °C to +85 °C

Storage temperature -65 °C to +150 °C

Absolute Maximum Ratings

Control Voltage Temperature IP3 @ 8 dBm

(V) (°C) Each Tone (dBm)

3 -40 44

3 25 38

3 85 29.5

5 -40 47.5

5 25 46.5

5 85 45.5

IP3 vs. Voltage and Temperature

Input Power Input power

Control @ 1 dB @ 0.1 dB

Voltage Temperature Compression Compression

(V) (°C) (dBm) (dBm)

3 -40 20.5 16.5

3 25 20 15.3

3 85 19 14

5 -40 28.5 23

5 25 28 23

5 85 27.5 23

Compression Point vs. Voltage

and Temperature @ 900 MHz

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

CAUTION: Although this device is designed to be as robust as

possible, ESD (Electrostatic Discharge) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

MSOP-8 Exposed Pad

0.073

(1.85 mm)

0.063

(1.60 mm)

0.072 (1.83 mm)

0.062 (1.57 mm)

0.0256

(0.650 mm)

Typ.

0.122 (3.09 mm)

0.114 (2.89 mm)

0.200 (5.08 mm)

0.114 (4.67 mm)

0.122

(3.09 mm)

0.114

(2.89 mm)

Exposed

Paddle

Pin 1

Indicator

0.012 (0.30 mm)

0.008 (0.20 mm) 0.006 (0.15 mm)

0.002 (0.05 mm)

0.044

(1.12 mm) Max.

Recommended Solder Reflow Profiles

Refer to the “Recommended Solder Reflow Profile”

Application Note.

Tape andReel Information

Refer to the “Discrete Devices and IC Switch/Attenuators

Tape and Reel Package Orientation” Application Note.

DATA SHEET • AS186-302, AS186-302LF

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200104 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 17, 2007 5

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided

by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and

Conditions of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and

names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are

incorporated by reference.