MCC TM Micro Commercial Components Features * * * * * * HER101 THRU HER108 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Halogen free available upon request by adding suffix "-HF" High Surge Current Capability Low Forward Voltage Drop 1.0 Amp High Efficient Rectifiers 50 to 1000 Volts Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Maximum Ratings * * * Operating Temperature: -55C to +125C Storage Temperature: -55C to +150C For capcitive load, derate current by 20% MCC Device Maximum Maximum Catalog Marking Recurrent RMS Number Peak Reverse Voltage Voltage HER101 50V 35V HER101 HER102 100V 70V HER102 HER103 HER103 200V 140V HER104 HER104 300V 210V HER105 HER105 400V 280V HER106 HER106 600V 420V HER107 800V 560V HER107 HER108 1000V 700V HER108 DO-41 Maximum DC Blocking Voltage 50V 100V 200V 300V 400V 600V 800V 1000V D A B Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage HER101-104 HER105 HER106-108 IF(AV) 1.0 A IFSM 30A 8.3ms, half sine VF IFM = 1.0A; TA = 25C Reverse Current At Rated DC Blocking Voltage (Maximum DC) Maximum Reverse Recovery Time HER101-105 HER106-108 Typical Junction Capacitance HER101-105 HER106-108 IR 1.0V 1.3V 1.7V 5.0A 100A TA = 25C TA = 100C Trr 50ns 75ns IF=0.5A, IR=1.0A, Irr=0.25A CJ 20pF 15pF Measured at 1.0MHz, VR=4.0V Note: Cathode Mark D TA = 55C C DIMENSIONS DIM A B C D INCHES MIN .166 .08 .028 1.000 MAX ..205 .107 .034 --- MM MIN 4.2 2.0 .71 25.40 MAX 5.2 2.7 .86 --- NOTE 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: B www.mccsemi.com 1 of 3 2013/01/01 MCC HER101 THRU HER108 TM Micro Commercial Components RATINGS AND CHARACTERISTIC CURVES FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM FIG.2- MAXIMUM AVERAGE FORWARD CURRENT DERATING trr +0.5A (+) 50Vdc (approx) (-) (-) DUT PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 1cm FIG.3- TYPICAL REVERSE CHARACTERISTICS Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 1.0 0 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) Tj=100 0C 100 10 Tj=25 0C 1 0 20 40 60 80 100 120 HE R1 01~ HE R1 04 HE R1 0 5 HE R1 06 ~H ER 10 8 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) 2.0 FIG.4- TYPICAL FORWARD CHARACTERISTICS 1000 0.1 SET TIME BASE FOR 5/ 10ns/ cm AVERAGE FORWARD CURRENT. (A) 10W NONINDUCTIVE 50W NONINDUCTIVE 1.0 0.1 0.01 0.001 140 .2 .4 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) .6 .8 1.0 1.2 1.4 FORWARD VOLTAGE. (V) FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.6- TYPICAL JUNCTION CAPACITANCE 30 JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 70 35 8.3ms Single Half Sine Wave JEDEC Method 25 20 15 10 0 60 50 40 HER 101 ~HE R10 HE 5 R10 6~H ER 108 30 20 10 1 2 5 10 20 50 100 0 .1 NUMBER OF CYCLES AT 60Hz .5 1 2 5 10 20 50 100 200 500 1000 REVERSE VOLTAGE. (V) www.mccsemi.com Revision: B 2 of 3 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 3 of 3 2013/01/01