VMP Bauform / Size : 2010 ISA-PLAN(R) - SMD Prazisionswiderstande / SMD precision resistors Technische Daten / technical data Widerstandswerte Resistance values 5 mOhm - 1 Ohm Toleranz Tolerance 1 %, 5 % Temperaturkoeffizient Temperature coefficient < 20 ppm/K (20 C - 60 C) Temperaturbereich Applicable temperature range -55 C bis/to +170 C Belastbarkeit Load capacity 2W Innerer Warmewiderstand (Rthi) Internal heat resistance (Rthi) < 30 K/W Isolationsspannung Dielectric withstanding voltage 200 V AC/DC Induktivitat (R< 20 m Ohm) Inductance < 2 nH Stabilitat (Nennlast) Abweichung TK= Kontaktstellentemperatur / Stability (Nominal load) deviation TK= Terminal temperature < 0.5 % nach/after 2000 h (TK = 80 C) < 0.7 % nach/after 2000 h (TK = 110 C) Merkmale / features * 2 W Dauerleistung bei 110 C 2 W permanent power at 110 C * Dauerstrome bis 20 A (5 mOhm) Constant current up to 20 A (5 mOhm) * Standard-Lotpadgeometrie (Baugroe 2010) Standard pad size (Size 2010) * Sehr hohe Pulsbelastbarkeit High pulse power rating * Sehr gute Langzeitstabilitat Excellent long term stability * Bauteilemontage: Reflow- und IR-Loten Mounting: Reflow- and IR-soldering * AEC-Q200 qualifiziert AEC-Q200 qualified Bauform / Size 2010 Applikationen / application * Messwiderstand fur Leistungshybride Current sensor for power hybrid applications * Steuergerate in der Automobiltechnik Control systems for the automotive market * Leistungsmodule Power modules * Frequenzumrichter Frequency converters * Schaltnetzteile Switch mode power supplies Abmessungen [mm] / Dimensions [mm] Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue VMP-2012-02-01 1/4 VMP Bauform / Size : 2010 TK, Lastminderung und Langzeitstabilitat / TCR, power derating and long term stability dR/R20 [%] Temperaturabhangigkeit des elektrischen Widerstandes von VMP-Widerstanden / Temperature dependence of the electrical resistance of VMP-resistors Grenzkurve / Limiting curve Typische Temperaturabhangigkeit eines VMP Widerstandes / Typical temperature dependence of a VMP resistor Temperatur [C] / Temperature [C] P / PNOM Lastminderungskurve / Power derating curve Verbesserte Stabilitat / Improved stability < 0.5 % Stabilitat / Stability < 0.7 % Kontaktstellentemperatur TK [C] / Terminal temperature TK [C] Widerstandsanderung [%] / Resistance change [%] Typische Langzeitstabilitat von VMP Widerstanden bei 140 C / Typical long term stability of VMP resistors at 140 C Auslagerungszeit [h] / Time [h] Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue VMP-2012-02-01 2/4 VMP Bauform / Size : 2010 Vorschlag fur Leiterplatten Layout (Reflowloten) / Proposal for pcb-layout (Reflow-soldering) Layout, wenn TK< 20 ppm/K notwendig fur R zwischen 30 und 80 m / Layout if TK< 20 ppm/K is required for R in between 30 and 80 m Alle Abmessungen in [mm] / All dimensions in [mm] Lotprofil Vorschlag / Recommended solder profile Reflow-, IR-Loten / Reflow-, IR-soldering Temperatur / Temperature [C] 260 255 217 Zeit / Time [s] peak 40 90 RoHS 2002/95/EG konform seit Produktstart. Ausfuhrliche Informationen erhalten Sie auf unserer Homepage: www.isabellenhuette.de RoHS 2002/95/EC compliance since product launch. For more information please visit our website: www.isabellenhuette.de Gurtinformationen / TAPE & REEL INFORMATION Norm / Specification DIN EN 60286-3 Anzahl Bauteile / Parts per reel 12500 Gurt Material / Tape material Kunststoff / plastic Bestellbezeichnung / ordering code VMP-R005-1.0-U* Typ / Type Widerstandswert / Resistance value Toleranz / Tolerance VMP 5 mOhm 1.0 % * Ehemalige Bestellbezeichnung VMP-R005-1.0 Former ordering code VMP-R005-1.0 Gewahrleistung Alle Angaben uber Eignung, Verarbeitung und Anwendung unserer Produkte, technische Beratung und sonstige Angaben erfolgen nach bestem Wissen, befreien den Kaufer jedoch nicht von eigenen Prufungen und Versuchen. Warranty All information regarding the suitability, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests. Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Ausgabe / Issue VMP-2012-02-01 3/4 VMP Bauform / Size : 2010 Grenzkurve fur maximale Pulsenergie bzw. Pulsleistung fur Dauerbetrieb / Maximum pulse energy respectively pulse power for continuous operation 10000 1000 Die dargestellte Kurve gilt fur den Widerstandswert R005. Fur andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate Qualifikation erfolgen sollte. / This curve is only valid for the resistance value R005. The shape of the curve in the range below 0.1 sec will be different for other resistance values. Therefore a separate qualification should be made for pulse power close to the above curve. Spezifikation / Specification AEC-Q200 Parameters Test Conditions Specified values Maximum Temperature for full power operation 110 C 110 C Working Temperature -55 to 170 C -55 to 170 C Thermal Shock MIL-STD-202 method 107-B1 0.1 % Solderability MIL-STD-202 method 208 > 95 % coverage Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d no damage Low Temperature Storage and Operation MIL-STD-26E 0.1 % 0.02 % Resistance to Soldering Heat MIL-STD-202 method 210 0.1 % 0.05 % Moisture Resistance MIL-STD-202 method 106 0.1 % 0.05 % Mechanical shock MIL-STD-202 method 213-A 0.1 % 0.02 % Vibration, High Frequency MIL-STD-202 method 204-B 0.2 % 0.05 % Operational Life MIL-STD-26E 0.7 % 0.5 % High Temperature Exposure MIL-STD-202 method 108-F 0.5 % 0.3 % High Temperature Exposure 140 C, 2000 h 0.3 % 0.1 % Current Noise MIL-STD-202 method 308 n. a. for R< 1Ohm Voltage Coefficient (%/V) MIL-STD-202 method 309 linearity error less than 120dB Resistance Temperature Characteristic MIL-STD-202 method 304 (20-60C) <20 ppm/K 10 ppm/K Thermal EMF 0 - 100 C 2 V/ K max. 0.5/K Frequency Characteristic (R<20mOhm) inductance < 2 nH < 0.5 Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de Isabellenhutte Heusler GmbH & Co. KG Typical test data 0.05 % Ausgabe / Issue VMP-2012-02-01 Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30 4/4