Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ ED
– EE199 – sn –
φD±0.5
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure
relief +
–
Radial Lead Type
Series: ED Type: A
■Di men sions in mm (not to scale)
■Ripple current Frequency Coeffi cient
Body Dia. φD10 12.5 16 18
Lead Dia. φd0.6 0.6 0.8 0.8
Lead space F 5.0 5.0 7.5 7.5
(mm)
✽Propose EE series for New design
■Specifi cations
Category Temp. Range –25 °C to +105 °C
Rated W.V. Range 160 V .DC to 450 V .DC
Nominal Cap. Range10 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.06 CV +10 (µA) After 2 minutes application of rated working voltage at +20 °C
tan δPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage),when the
capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : φ
10=8000 hours,
φ
12.5 to φ
18=10000 hours
Capacitance change ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Frequency
(Hz)
Cap.(µF)
50 < f < 120 120 < f < 300 300 < f < 1 k 1 k < f < 10 k 10 k < f < 30 k 30 k < f <100 k
Cap. < 100 µF 0.30 0.40 0.55 0.70 0.90 1.00
100 µF < Cap. 0.35 0.45 0.60 0.75 0.90 1.00
[mm]
■Features
● High ripple current (at high frequency)
● Endurance : 105 °C 8000 h to 10000 h
● Including low profi le products (20 mm height)
● RoHS directive compliant
Oct. 201002
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ ED
– EE200 – sn –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (pcs.) (pcs.)
160
22 10 20 500 0.15 8000 0.6 5.0 5.0 EEUED2C220( ) 200 500
33 10 20 580 0.15 8000 0.6 5.0 5.0 EEUED2C330( ) 200 500
47 10 20 750 0.15 8000 0.6 5.0 5.0 EEUED2C470( ) 200 500
68 12.5 20 9500.1510000 0.6 5.0 5.0 EEUED2C680( ) 200 500
82 12.5 25 1060 0.15 10000 0.6 5.0 5.0 EEUED2C820( ) 200 500
100 12.5 25 1170 0.15 10000 0.6 5.0 5.0 EEUED2C101( ) 200 500
16 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2C101S( ) 100 250
150 16 25 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151( ) 100 250
18 20 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151S( ) 100 250
220 16 31.5 1700 0.15 10000 0.8 7.5 EEUED2C221 100
18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2C221S( ) 100 250
3301831.52000 0.15 10000 0.8 7.5 EEUED2C331 50
200
22 10 20 600 0.15 8000 0.6 5.0 5.0 EEUED2D220( ) 200 500
33 10 20 650 0.15 8000 0.6 5.0 5.0 EEUED2D330( ) 200 500
47 12.5 20 7900.1510000 0.6 5.0 5.0 EEUED2D470( ) 200 500
68 12.5 25 9500.1510000 0.6 5.0 5.0 EEUED2D680( ) 200 500
16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2D680S( ) 100 250
82 16 20 1100 0.15 10000 0.8 7.5 7.5 EEUED2D820S( ) 100 250
100 16 25 1300 0.15 10000 0.8 7.5 7.5 EEUED2D101( ) 100 250
18 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2D101S( ) 100 250
150162514000.1510000 0.8 7.5 7.5 EEUED2D151( ) 100 250
2201831.52000 0.15 10000 0.8 7.5 EEUED2D221 50
330184024000.1510000 0.8 7.5 EEUED2D331 50
250
22 10 20 560 0.15 8000 0.6 5.0 5.0 EEUED2E220( ) 200 500
33 12.5 20 7100.1510000 0.6 5.0 5.0 EEUED2E330( ) 200 500
47 12.5 25 9200.1510000 0.6 5.0 5.0 EEUED2E470( ) 200 500
16 20 9900.1510000 0.8 7.5 7.5 EEUED2E470S( ) 100 250
68 16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2E680S( ) 100 250
82 16 25 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820( ) 100 250
18 20 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820S( ) 100 250
100 16 31.5 1500 0.15 10000 0.8 7.5 EEUED2E101 100
18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2E101S( ) 100 250
1501831.518000.1510000 0.8 7.5 EEUED2E151 50
220184021000.1510000 0.8 7.5 EEUED2E221 50
350
10 10 20 350 0.20 8000 0.6 5.0 5.0 EEUED2V100( ) 200 500
22 12.5 20 4800.2010000 0.6 5.0 5.0 EEUED2V220( ) 200 500
33 16 20 6400.2010000 0.8 7.5 7.5 EEUED2V330S( ) 100 250
47 16 25 8000.2010000 0.8 7.5 7.5 EEUED2V470( ) 100 250
18 20 8000.2010000 0.8 7.5 7.5 EEUED2V470S( ) 100 250
68 16 31.5 1100 0.20 10000 0.8 7.5 EEUED2V680 100
18 25 1000 0.20 10000 0.8 7.5 7.5 EEUED2V680S( ) 100 250
82 18 25 1100 0.20 10000 0.8 7.5 7.5 EEUED2V820S( ) 100 250
1001831.512000.2010000 0.8 7.5 EEUED2V101 50
Endurance : 105 °C φ10=8000 h, φ12.5 to φ18=10000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide.
Oct. 200801
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ ED
– EE201 – sn –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (pcs.) (pcs.)
400
10 10 20 300 0.24 8000 0.6 5.0 5.0 EEUED2G100( ) 200 500
15 12.5 20 4100.2410000 0.6 5.0 5.0 EEUED2G150( ) 200 500
22 12.5 25 5000.2410000 0.6 5.0 5.0 EEUED2G220( ) 200 500
16 20 6000.2410000 0.8 7.5 7.5 EEUED2G220S( ) 100 250
33 16 20 7300.2410000 0.8 7.5 7.5 EEUED2G330S( ) 100 250
47 16 25 8400.2410000 0.8 7.5 7.5 EEUED2G470( ) 100 250
18 20 8400.2410000 0.8 7.5 7.5 EEUED2G470S( ) 100 250
68 18 31.5 1200 0.24 10000 0.8 7.5 EEUED2G680 50
82 18 40 1500 0.24 10000 0.8 7.5 EEUED2G820 50
450
10 12.5 20 3500.2410000 0.6 5.0 5.0 EEUED2W100( ) 200 500
15 12.5 25 5600.2410000 0.6 5.0 5.0 EEUED2W150( ) 200 500
22 16 20 6800.2410000 0.8 7.5 7.5 EEUED2W220S( ) 100 250
33 16 31.5 8500.2410000 0.8 7.5 EEUED2W330 100
18 25 8500.2410000 0.8 7.5 7.5 EEUED2W330S( ) 100 250
47 18 31.5 1000 0.24 10000 0.8 7.5 EEUED2W470 50
68 18 40 1300 0.24 10000 0.8 7.5 EEUED2W680 50
Endurance : 105 °C φ10=8000 h, φ12.5 to φ18=10000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide.
Oct. 200801
