Ultrasonic Sensors x File 9006 CONTENTS Schneider Electric Brands Description Page Selection / Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 Specifications / Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371 Ultrasonic Sensors 12, 18, and 30 mm Plastic Tubular DC 12, 18, and 30 mm Plastic Tubular/ DC Features: thread M12X1 * PNP or NPN output * Housing: Plastic Output Mode Circuit Type Voltage Range * Self-teach on 30 mm version * Mounting nuts included Connection Type Load Current Maximum thread 12 mm Diameter - Nominal Sensing Range 2" (51 mm) M18X1 N.O. PNP/NPN 12-24 Vdc 4 pin Nano 100 mA Ultrasonic Frequency Catalog Number 500 kHz XX512A1KAM8 500 kHz XX518A1KAM12 200 kHz XX630A1KAM12 18 mm Diameter - Nominal Sensing Range 5.98" (152 mm) N.O. PNP/NPN 12-24 Vdc 4 pin Micro 100 mA 30 mm Diameter - Nominal Sensing Range 3.2" (1 m) N.O. thread M30X1.5 PNP/NPN 4 pin Micro 100 mA Operation During set up and operation of the XX ultrasonic sensor continually and accurately measures the elapsed time of every pulse echo reception after each pulse transmission. The transmitted pulse starts a clock to register the elapsed time for the received echoes. Given the elapsed time, the sensor software calculates the distance traveled to the object of surface and back to the sensor, using a D=TVs/2, D= Distance from the sensor to the object; T = Elapsed time between the pulse transmission and its echo reception, Vs = the Velocity of sound, approximately 1100 feet per second. Dimensions PULSE Dwo 1.95 in. 50 mm Dwi Near Limit ECHO 1.5 in. 38 mm Far Limit OBJECT 0.47 in. 12 mm D 12 mm x 1 mm SHADED AREA REPRESENTS THE FIXED SENSING WINDOW 8 mm x 1 mm 12 mm 2.91 in. 74 mm Sensing face While the sensor is in operation, the calculated distance (D) between the sensor and the object is compared to the distances associated with the fixed window limits. These limits are shown in the illustration above as Dwi and Dwo. If D is within these limits, an output is generated. The output remains on until the echo does not return or it returns from outside the window limits. 2.55 in. 65 mm 2.01 in. 51 mm 0.71 in. 18 mm Normally open operation diagrams shown below for all the XX Ultrasonic ranges. 18 mm x 1 mm 12 mm 18 mm 12 mm x 1 mm 0.0 mm (0.0") 18 mm 6.4 mm (0.25") Near Limit 6.3 mm (0.25") Far Limit 50.8 mm (2.00") Small objects are best sensed about 38.1 mm (1.5") Sensing Field 0.0 mm (0.0") 19.1 mm (0.75") Green LED is ON when power is applied 0.79 in. 20 mm OFF 3.33 in. 85 mm 1.11 in. 28 mm M30 x 1.5 mm-6g Orange LED is ON when an object is not sensed. Amber LED is ON when an object is Deadband sensed Erratic operation within this range WHT (source) Amber LED WHT (source) V+ V+ BL K (sin k) BL K (sin k) Sensing Range 990.6 mm (39.00") Far Limit 152.4 mm (6.00") OFF OFF Orange LED OFF ON Near Limit 25.4 mm (1.00") Fixed Sensing Window ON 3.73 in. 95 mm 1.37 in. 35 mm Ultrasonic Sensors 2.29 in. 58 mm Sensing face 12-24 Vdc ON WHT (source) Amber LED is ON V+ when an object is within window Deadband Erratic operation BL K within this range (sink) WHT (source) V+ BL K (sink) Amber LED WHT (source) V+ BL K (sink) 30 mm 30 mm 0.0 mm 50.8 mm (0.0") (2.00") Deadband Erratic operation within this range Window Setup Yellow Pushbutton LED Multicolor LED Green Red Connector Multicolor LED V+ WHT P NP BL K P NP V+ WHT P NP BL K P NP Red LED is On when black-wire PNP is active Red V+ W H T V+ P NP BL K P NP Off WHT P NP BL K P NP Black-wire PNP is N.O. White-wire PNP is N.C. 370 (c)1997- 2002 Schneider Electric All Rights Reserved 10/02 Ultrasonic Sensors 12, 18, and 30 mm Plastic Tubular DC, AC/DC Specifications Wiring Mechanical Connector M8 2 3 (-) 1 (+) 4 NPN Output 2 PNP Output 4 1 3 12 mm Connector M12 4 3 1 2 3 (-) 1 (+) 4 NPN Output 2 PNP Output 18 / 30 mm Diameter Nominal Sensing Range Sensing Zone Ultrasonic Cone Angle (see beam plots) Temperature Range Humidity Enclosure Rating Vibration Shock Repeat Accuracy Maximum Angular Deviation 12 mm 18 mm 30 mm 2" (51 mm) 5.98" (152 mm) 3.21' (1 m) 0.25 - 2.0" (6.4 - 50.8 mm) 1.0 - 6.0" (25.4 - 152.4 mm) 2.0 - 39.0" (51 - 991 mm) 7 10 - 4 to + 149 F (- 20 to + 65 C) + 32 to + 122 F (0 to + 50 C) 100 % IP67 7 G @ 1 mm (F = 10 to 55 Hz) 30 G, 11 ms + / - 0.027" (0.7 mm) + / - 0.034" (0.87 mm) + / - 10 0.1" (2.5 mm) dia. rod 0.06" (1.59 mm) dia. rod 0.04" (1 mm) flat bar Case: plastic; Sensing Face: silicon rubber / except 0.47" (12 mm) glass epoxy LED ring No LED Two LED's Minimum Size Detection Enclosure Material LED Indicators Electrical BU/3 + BK/4 WH/2 - Rated Supply Voltage Voltage Limits (including ripple) Maximum Load Current Voltage Drop; on-state Residual Current; open state Current Consumption, no load Power Up Delay On / Off Delay Ultrasonic Frequency Protection ESD Overvoltage Reverse Polarity Approvals 12 to 24 Vdc 10 to 28 Vdc 100 mA 0.79 V PNP / 0.58 V NPN 0.07 uA max. 20 mA 20 ms 2 ms on / 2 ms off 500 kHz Yes Yes Yes CE 0.75 V PNP / 0.67 V NPN 0.05 uA max. 60 mA 350 ms 3 ms on / 3 ms off 0.75 V PNP / 0.33 V NPN 80 mA 720 ms 25 ms on / 25 ms off Ultrasonic Sensors BN/1 PNP/NPN Beam Plots The beam plots below, were developed from data collected at 20 C and zero air flow, which defines the boundaries and shape of the sonic beams shown for the XX ultrasonic sensor range. The boundaries were established using a 10 cm x 10 cm target positioned parallel to the sensor face, moved in and out of the sensors operating range. 18 mm 12 mm mm inches 20 sonic pattern measured by moving a large flat surface into the beam mm 120 in. 4 10 0 -10 Deadband mm 0 20 10 30 -20 60 50 40 0.5 0.4 0.3 0.2 0.1 -0.0 -0.1 -0.2 -0.3 -0.4 -0.5 inches 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 80 3 2 40 1 0 0 -1 -40 -2 deadband -3 -80 -4 -120 cm 0 in. 0 5 1 2 10 3 4 15 5 6 20 7 8 25 9 10 30 11 12 35 13 30 mm mm inches 400 300 10 8 6 100 4 2 0 0 -2 -100 -4 -6 -200 -8 -10 -300 200 deadband Connector Cables (M8 or S suffix; M12 or D suffix) XSZCS141 XSZCS151 XSZCD101Y XSZCD111Y Nano Conn., 4 pin, 2 m, straight Nano Conn., 4 pin, 2 m, 90 Micro Conn., 4 pin, 2 m, straight Micro Conn., 4pin, 2 m, 90 0 10 20 30 40 50 60 inches 0 4 8 12 16 20 24 cm 70 28 80 32 90 100 36 -400 110 40 For additional cable options and lengths see p. 518 371 10/02 (c) 1997-2002 Schneider Electric All Rights Reserved Ultrasonic Sensors Declaration of Conformity xx MANUFACTURER'S DECLARATION OF CONFORMITY Document No: R-MDOC-XX5&6-R1 The undersigned, representing the manufacturer Company: SQUARE D COMPANY address: 8001 HWY 64 East Knightdale, NC 27545-9023 USA Herewith declares that the product(s) Product identification: XX512A1KAM8, 12mm cylindrical ultrasonic sensor Ultrasonic Sensors XX518A1KAM12, 18mm cylindrical ultrasonic sensor XX630A1KAM12, 30mm cylindrical ultrasonic sensor To which this declaration refers are in conformity with the following: Standards And/Or Normative Documents: Low Voltage Switchgear and Controlgear, EN60947-1: General rules EN60947-5-2: Proximity Switches Subject to installation, maintenance and utilization in accordance with their purpose, regulations, current standards, manufacturer`s instructions and industry standards. Meet(s) the provisions of the following EC Directive(s): (Including all applicable amendments) reference n title 73/23/CCE Low-voltage Directive of February 19, 1973 modified by Directive 93/68/EC of July 22, 1993. 89/336/CEE Electromagnetic Compatibility Directive of May 3, 1989 modified by Directives 92/31/CEE of April 28, 1992 and 93/68/CEE of July 22, 1993. The CE marking on the product and/or the packaging signifies that the product is in compliance with the applicable EU Directives . Location Date Authorization Signature Raleigh, NC February 13, 2002 Name: John Gawron Position: Director, Industrial Control Activity Signature: ALL DISTRIBUTION OR REPRODUCTION WITHOUT WRITTEN AUTHORIZATION IS FORBIDDEN. Page 1 of 1 372 (c)1997- 2002 Schneider Electric All Rights Reserved 10/02 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schneider Electric: XX518A1KAM12 XX630A1KAM12 XX512A1KAM8