IRF240
Document Number 3332
Issue 1
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
MECHANICAL DATA
Dimensions in mm (inches)
40.01 (1.575)
Max.
4.47 (0.176)
Rad.
2 Pls.
22.23 (0.875)
Max.
11.43 (0.450)
6.35 (0.250)
12.19 (0.48)
11.18 (0.44)
1.63 (0.064)
1.52 (0.060)
1.09 (0.043)
0.97 (0.038)
Dia.
30.40 (1.197)
29.90 (1.177)
16.97 (0.668)
16.87 (0.664)
4.09 (0.161)
3.84 (0.151)
2 Pls
11.18 (0.440)
10.67 (0.420)
26.67
(1.050)
Max.
2
1
TO3 METAL PACKAGE (TO204AA)
N–CHANNEL
POWER MOSFET
FOR HI–REL
APPLICATIONS
FEATURES
• HERMETICALLY SEALED TO3 METAL
PACKAGE
• SIMPLE DRIVE REQUIREMENTS
• SCREENING OPTIONS AVAILABLE
Pin 1 = Gate Pin 2 = Source Case = Drain
VDSS 200V
ID(cont) 18A
RDS(on) 0.18ΩΩ
VGS Gate – Source Voltage
IDContinuous Drain Current @ Tcase = 25°C
IDContinuous Drain Current @ Tcase = 100°C
IDM Pulsed Drain Current
PDPower Dissipation @ Tcase = 25°C
Linear Derating Factor
TJ, Tstg Operating and Storage Temperature Range
RθJC Thermal Resistance Junction to Case
RθJA Thermal Resistance Junction to Ambient
±20V
18A
11A
72A
125W
1.0W/°C
–55 to 150°C
1.0°C/W max.
30°C/W max.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Underside View
IRF240
Document Number 3332
Issue 1
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Parameter Test Conditions Min. Typ. Max. Unit
VGS = 0 ID= 1mA
Reference to 25°C
ID= 1mA
VGS = 10V ID= 11A*
VGS = 10V ID= 18A*
VDS = VGS ID= 250µA
VDS ≥15V IDS = 11A*
VGS = 0 VDS = 0.8BVDSS
TJ= 125°C
VGS = 20V
VGS = –20V
VGS = 0
VDS = 25V
f = 1MHz
VGS = 10V ID= 18A
VDS = 0.5BVDSS
VDD = 100V
ID= 18A
RG= 9.1Ω
IS= 18A TJ= 25°C
VGS = 0
IS= 18A TJ= 25°C
di/ dt≤100A/µsV
DD ≤50V
ELECTRICAL CHARACTERISTICS (TC= 25°C unless otherwise stated)
Drain – Source Breakdown Voltage
Temperature Coefficient of
Breakdown Voltage
Static Drain – Source On–State
Resistance
Gate Threshold Voltage
Forward Transconductance
Zero Gate Voltage Drain Current
Forward Gate
– Source Leakage
Reverse Gate
– Source Leakage
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge
Gate – Source Charge
Gate – Drain (“Miller”) Charge
Turn–On Delay Time
Rise Time
Turn–Off Delay Time
Fall Time
Continuous Source Current
Pulse Source Current
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
200
0.29
0.18
0.21
24
6.1 25
250
100
-100
1300
400
130
32 60
2.2 10.6
14 38
20
152
58
67
18
72
1.5
500
5.3
5.0
13
V
V/°C
Ω
V
S(Ω
µA
nA
pF
nC
ns
A
V
ns
µC
nH
BVDSS
∆BVDSS
∆TJ
RDS(on)
VGS(th)
gfs
IDSS
IGSS
IGSS
Ciss
Coss
Crss
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
IS
ISM
VSD
trr
Qrr
LD
LS
STATIC ELECTRICAL RATINGS
DYNAMIC CHARACTERISTICS
SOURCE – DRAIN DIODE CHARACTERISTICS
Internal Drain Inductance (from 6mm down drain lead pad to centre of die)
Internal Source Inductance (from 6mm down source lead to centre of source bond pad)
PACKAGE CHARACTERISTICS
(Ω)
* Pulse width ≤ 300µs; Duty Cycle ≤2%
