DC/DC-Converter TEM Series 2Watt * 2 W converter with 500 VDC. resp. 3'000 Vpk-pk I/O isolation * Input voltages: 5,12 and 24 VDC * Regulated outputs * Continous short circuit protection * Low ripple and noise * 24-pin plastic DIP * Industry standard pin-out * 100% Burn-in DC/DC-Wandler TEM Serie 2Watt * 2 W Wandler mit 500 VDC resp. 3'000 Vpk-pk E/A Isolation * Eingangsspannungen: 5, 12 und 24 VDC * Regulierte Ausgange * Dauerkurzschlussfest * Kleine Restwelligkeit * DIL-24 Kunststoffgehause * 100% Burn-in The TEM-2 series is a family of cost effetive 2 W converters in a DIP-24 package. They offer tight line/ load regulation and 500 VDC, resp. 3'000 Vpk-pk I/O-isolation. Standard features include an internal -filter to reduce reflected input ripple current and to guarantee low output noise. Operating temperature range -25 C to +70 C. Die TEM-2 Serie ist eine kostengunstige Familie von 2 W DC-DC Wandler im DIL-24 Gehause. Sie bieten eine sehr genaue Eingangs-/ Lastregulierung und 500 VDC resp. 3'000 Vpk-pk E/A Isolation. Ein standardmassig eingebautes -Filter reduziert die reflektierten Rippelstrome am Eingang und gewahrleistet sehr kleine Restwelligkeit. Der Betriebstemperaturbereich betragt -25 C bis +70 C. Models / Modelle I/O-Isolation 500 VDC 3'000 Vpk-pk TEM 2-0511 TEM 2-0512 TEM 2-0521 TEM 2-0522 TEM 2-0511HI TEM 2-0512HI TEM 2-0521HI TEM 2-0522HI TEM 2-1211 TEM 2-1212 TEM 2-1221 TEM 2-1222 TEM 2-1211HI TEM 2-1212HI TEM 2-1221HI TEM 2-1222HI TEM 2-2411 TEM 2-2412 TEM 2-2421 TEM 2-2422 TEM 2-2411HI TEM 2-2412HI TEM 2-2421HI TEM 2-2422HI Input voltage range Eingangsspannungsbereich Output voltage Ausgangsspannung Output current Ausgangsstrom max. Input current Eingangsstrom 100% load typ. * 4.75 -5.5 VDC 5 VDC 12 VDC 12 VDC 15 VDC 400 mA 160 mA 80 mA 65 mA 770 mA 10.8 - 13.2 VDC 5 VDC 12 VDC 12 VDC 15 VDC 400 mA 160 mA 80 mA 65 mA 300 mA 21.6 - 26.4 VDC 5 VDC 12 VDC 12 VDC 15 VDC 400 mA 160 mA 80 mA 65 mA 135 mA *HI version 4.75-5.25 VDC Input Specifications Eingangsspezifikationen Input current (no load) Eingangsstrom (Leerlauf) Input filter Eingangsfilter Output Specifications Ausgangsspezifikationen Voltage accuracy Einstellgenauigkeit Regulation - Input variation - Load variation 10 - 90 % - single output - dual output Regelabweichungen - Eingangsspannungsanderung - Lastanderung 10 - 90 % - einfach Ausgang - dual Ausgang 0.5 % 1.0 % Ripple and noise - Ripple 1 MHz - Spikes (20 MHz Bandwidth) Restwelligkeit - Rippel 1 MHz - Spikes (20 MHz Bandbreite) 30 mVpk-pk typ. 30 mVpk-pk typ. Temperature coefficient Temperatur-Koeffizient 0.02 % / C Short circuit protection Kurzschlussicherheit continuous/ dauernd General Specifications Allgemeine Spezifikationen Operating temperature range Betriebstemperaturbereich -25 C ... +70 C Case temperature Gehausetemperatur +90 C max. Storage temperature range Lagertemperaturbereich -40 C ... +100 C Derating above 60 C Leistungsreduktion ab 60 C 2.5 % / C Efficiency Wirkungsgrad Isolation voltage - Input/ Output Prufspannung - Eingang/ Ausgang Isolation capacity I/O Isolationskapazitat E/A Isolation resistance I/O (500VDC) Isolationswiderstand E/A (500VDC) > 1'000 MOhm Switching frequency Schaltfrequenz 50 kHz typ. Physical Specifications Physikalische Spezifikationen Weight Gewicht 12 g Case material Gehausematerial non-conductive black plastic Soldering temperature Lottemperatur max. 250 C / 4 sec. 32 0.5 2.0 Pins o 0,5 mm Rev. 06/ 95 10 11 12 15.24 10 0.5 Specifications can be changed without notice Technische Anderungen vorbehalten internal filter TEM TEM-HI 1 2 3 24 23 22 2.54 27.94 3.8 100 mA typ. 35 mA typ. 20 mA typ. 3% 2% 0.3 % TEM TEM-HI 55 - 60 % 60 - 65 % TEM TEM-HI 500 VDC 3'000 Vpk-pk/1min, 1500 VDC TEM TEM-HI 150 pF 80 pF Alle Spezifikationen gultig bei Nominal-Eingangsspannung, Vollast und +25 C nach Aufwarmzeit, ausgenommen anders spezifiziert All specifications valid at nominal input voltage, full load and +25 C after warm-up time unless otherwise stated 15 14 13 5 VDC models 12 VDC models 24 VDC models 20 0.5 Bottom View Pin-Out Pin 1 2 3 10 11 12 13 14 15 22 23 24 TEM 2 Single output Dual output + Vin + Vin No connection - Out 2 No connection Common - Out Common + Out + Out 1 - Vin - Vin - Vin - Vin + Out + Out 1 - Out Common No connection Common No connection - Out 2 +Vin +Vin TEM 2 HI Single output Dual output + Vin + Vin + Vin + Vin No pin No pin No pin Common No pin Common - Out No pin + Out - Out 2 No pin No pin No pin + Out 1 No pin No pin - Vin - Vin - Vin - Vin