MPSA13, MPSA14 MPSA14 is a Preferred Device Darlington Transistors NPN Silicon Features http://onsemi.com * Pb-Free Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector -Emitter Voltage VCES 30 Vdc Collector -Base Voltage VCBO 30 Vdc Emitter -Base Voltage VEBO 10 Vdc Collector Current - Continuous IC 500 mAdc Total Device Dissipation @ TA = 25C Derate above 25C PD 625 5.0 mW mW/C Total Device Dissipation @ TC = 25C Derate above 25C PD 1.5 12 W mW/C TJ, Tstg -55 to +150 C Operating and Storage Junction Temperature Range EMITTER 1 TO-92 CASE 29 STYLE 1 1 12 THERMAL CHARACTERISTICS Characteristic BASE 2 Symbol Max Unit Thermal Resistance, Junction-to-Ambient RqJA 200 C/mW Thermal Resistance, Junction-to-Case RqJC 83.3 C/mW Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 3 STRAIGHT LEAD BULK PACK 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAM MPS A1x AYWW G G x = 3 or 4 A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2007 April, 2007 - Rev. 4 1 Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MPSA13/D MPSA13, MPSA14 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR)CES 30 - Vdc Collector Cutoff Current (VCB= 30 Vdc, IE = 0) ICBO - 100 nAdc Emitter Cutoff Current (VEB= 10 Vdc, IC = 0) IEBO - 100 nAdc 5,000 10,000 10,000 20,000 - - - - OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (IC = 100 mAdc, IB = 0) ON CHARACTERISTICS (Note 1) DC Current Gain (IC = 10 mAdc, VCE = 5.0 Vdc) hFE MPSA13 MPSA14 MPSA13 MPSA14 (IC = 100 mAdc, VCE = 5.0 Vdc) - Collector -Emitter Saturation Voltage (IC = 100 mAdc, IB = 0.1 mAdc) VCE(sat) - 1.5 Vdc Base -Emitter On Voltage (IC = 100 mAdc, VCE = 5.0 Vdc) VBE(on) - 2.0 Vdc 125 - SMALL-SIGNAL CHARACTERISTICS fT Current-Gain - Bandwidth Product (Note 2) (IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz) MHz 1. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2.0%. 2. fT = |hfe| S ftest. ORDERING INFORMATION Package Shipping TO-92 5000 Units / Bulk TO-92 (Pb-Free) 5000 Units / Bulk TO-92 2000 / Tape & Reel MPSA13RLRAG TO-92 (Pb-Free) 2000 / Tape & Reel MPSA13RLRMG TO-92 (Pb-Free) 2000 / Ammo Pack MPSA13RLRPG TO-92 (Pb-Free) 2000 / Ammo Pack MPSA13ZL1G TO-92 (Pb-Free) 2000 / Ammo Pack MPSA14G TO-92 (Pb-Free) 5000 Units / Bulk MPSA14RLRAG TO-92 (Pb-Free) 2000 / Tape & Reel MPSA14RLRPG TO-92 (Pb-Free) 2000 / Ammo Pack Device MPSA13 MPSA13G MPSA13RLRA For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 MPSA13, MPSA14 RS in en IDEAL TRANSISTOR Figure 1. Transistor Noise Model NOISE CHARACTERISTICS (VCE = 5.0 Vdc, TA = 25C) 2.0 BANDWIDTH = 1.0 Hz RS 0 200 BANDWIDTH = 1.0 Hz i n, NOISE CURRENT (pA) en, NOISE VOLTAGE (nV) 500 100 10 mA 50 100 mA 20 IC = 1.0 mA 10 1.0 0.7 0.5 IC = 1.0 mA 0.3 0.2 100 mA 0.1 0.07 0.05 10 mA 0.03 5.0 10 20 50 100 200 500 1k 2k 5k 10k 20k f, FREQUENCY (Hz) 50k 100k 0.02 10 20 50 100 200 50k 100k Figure 3. Noise Current 14 200 BANDWIDTH = 10 Hz TO 15.7 kHz 12 BANDWIDTH = 10 Hz TO 15.7 kHz 100 NF, NOISE FIGURE (dB) VT, TOTAL WIDEBAND NOISE VOLTAGE (nV) Figure 2. Noise Voltage 500 1k 2k 5k 10k 20k f, FREQUENCY (Hz) IC = 10 mA 70 50 100 mA 30 20 1.0 mA 10 1.0 2.0 10 10 mA 8.0 100 mA 6.0 4.0 IC = 1.0 mA 2.0 5.0 10 20 50 100 200 RS, SOURCE RESISTANCE (kW) 500 1000 0 1.0 Figure 4. Total Wideband Noise Voltage 2.0 5.0 10 20 50 100 200 RS, SOURCE RESISTANCE (kW) Figure 5. Wideband Noise Figure http://onsemi.com 3 500 1000 MPSA13, MPSA14 SMALL-SIGNAL CHARACTERISTICS 4.0 |h fe |, SMALL-SIGNAL CURRENT GAIN C, CAPACITANCE (pF) 20 TJ = 25C 10 7.0 Cibo Cobo 5.0 3.0 2.0 0.04 0.1 0.2 0.4 1.0 2.0 4.0 VR, REVERSE VOLTAGE (VOLTS) 10 20 VCE = 5.0 V f = 100 MHz TJ = 25C 2.0 1.0 0.8 0.6 0.4 0.2 0.5 40 1.0 200k hFE, DC CURRENT GAIN TJ = 125C 100k 70k 50k 25C 30k 20k 10k 7.0k 5.0k -55 C VCE = 5.0 V 3.0k 2.0k 5.0 7.0 10 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500 TJ = 25C 2.5 IC = 10 mA RV, TEMPERATURE COEFFICIENTS (mV/C) TJ = 25C V, VOLTAGE (VOLTS) 1.4 VBE(sat) @ IC/IB = 1000 1.2 VBE(on) @ VCE = 5.0 V 1.0 VCE(sat) @ IC/IB = 1000 5.0 7.0 10 50 mA 250 mA 500 mA 2.0 1.5 1.0 0.5 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 IB, BASE CURRENT (mA) 100 200 500 1000 Figure 9. Collector Saturation Region 1.6 0.6 500 3.0 Figure 8. DC Current Gain 0.8 0.5 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) Figure 7. High Frequency Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 6. Capacitance 2.0 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500 -1.0 -2.0 *APPLIES FOR IC/IB hFE/3.0 25C TO 125C *RqVC FOR VCE(sat) -55 C TO 25C -3.0 25C TO 125C -4.0 qVB FOR VBE -5.0 -55 C TO 25C -6.0 5.0 7.0 10 Figure 10. "On" Voltages 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) Figure 11. Temperature Coefficients http://onsemi.com 4 500 1.0 0.7 0.5 D = 0.5 0.2 0.3 0.2 0.1 0.05 SINGLE PULSE 0.1 0.07 0.05 SINGLE PULSE ZqJC(t) = r(t) * RqJCTJ(pk) - TC = P(pk) ZqJC(t) ZqJA(t) = r(t) * RqJATJ(pk) - TA = P(pk) ZqJA(t) 0.03 0.02 0.01 0.1 0.2 0.5 1.0 2.0 10 5.0 20 50 t, TIME (ms) 100 200 500 Figure 12. Thermal Response 1.0k 700 500 IC, COLLECTOR CURRENT (mA) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MPSA13, MPSA14 300 200 1.0 ms TC = 25C TA = 25C 100 ms 1.0 s 100 70 50 30 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 20 10 0.4 0.6 1.0 2.0 4.0 6.0 10 20 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 40 Figure 13. Active Region Safe Operating Area FIGURE A tP PP PP t1 1/f t DUTYCYCLE + t1f + 1 tP PEAK PULSE POWER = PP Design Note: Use of Transient Thermal Resistance Data http://onsemi.com 5 1.0k 2.0k 5.0k 10k MPSA13, MPSA14 PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X-X 1 N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.115 --- 0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 2.93 --- 3.43 --- N A R BENT LEAD TAPE & REEL AMMO PACK B P NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. T SEATING PLANE K D X X G J V 1 C SECTION X-X DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --- 2.04 2.66 1.50 4.00 2.93 --- 3.43 --- N STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MPSA13/D