T-13/4 (5 mm) Right Angle Mount Housing Technical Data HLMP-5029 Option B2 Option B1 Features Description * Fits Any HP High Dome T-1 3/4 LED Lamp * Snap-In Fit Makes Mounting Simple * High Contrast Black Plastic * May be Ordered with Mounted T-13/4 Lamp as an Option The HLMP-5029 is a black plastic right angle housing which mates with Hewlett-Packard high dome T-13/4 lamps. The leads should be prebent 90 as shown prior to snapping into the right angle housing. The housing material is high temperature nylon capable of withstanding temperatures up to +150C. Physical Dimensions OPTION NO. CATHODE LEAD LENGTH ANODE LEAD LENGTH B2 4.70 (0.185) 3.68 (0.145) 4.70 (0.185) 3.68 (0.145) B1 20.32 (0.800) MIN. SHEARED EVEN LEADS UNSHEARED 1.27 (0.050) NOM. LONGER UNEVEN LEADS THAN CATHODE NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEAD WIDTH MAY BE 0.45 (0.018) OR 0.64 (0.025) SQUARE NOMINAL DEPENDING UPON PRODUCT TYPE. 3. OPTION 100 IS AVAILABLE FOR LONGER LEADS. 9.27 (0.365) 8.76 (0.345) 6.32 (0.249) 6.09 (0.240) 4.70 (0.185) 3.94 (0.155) 5.06 (0.200) 4.57 (0.180) 3.10 (0.122) REF. 6.37 (0.251) 6.09 (0.240) NOTE 2 DESIGNATES CATHODE 2.54 (0.100) REF. PATENT PENDING 90 TYP. 5.33 (0.210) REF. SEE TABLE As an option, T-13/4 lamps may be ordered pre-mounted into the HLMP-5029 housing with leads bent down 90 and sheared to length, see table. To order, select the lamp base, part number and affix the desired option code. For example, the HLMP-3300 HER lamp may be ordered premounted into the HLMP-5029 housing with leads shared to an even length. The part number for this option is: HLMP-3300 Option B2. www.hp.com/go/led For technical assistance or the location of your nearest Hewlett-Packard sales office, distributor or representative call: Americas/Canada: 1-800-235-0312 or 408-654-8675 Far East/Australasia: Call your local HP sales office. Japan: (81 3) 3335-8152 Europe: Call your local HP sales office. Data subject to change. Copyright (c) 1999 Hewlett-Packard Co. Obsoletes 5968-3275E 5968-4122E (3/99)