10 9 8 7 6 5 | 4 3 2 | 39357 A i IMPRINT 1.8/.07 AS SHOWN (10A OPTION) 170 _ 3.45 om 67 136 NO. OF CIRCUITS | DM *A" DMB MATERIAL NO. [MATERIAL NO. yy" 40A IMPRINT 3 CIRCUIT AND 02 [70__[ 78] 1350 [736] [39357-0002 [393590006 KF) TOA IMPRINTING 03 05 [4] 17.00 [276] [39357-0003 [393590004 8.5t OPTION SHOWN 04 4.0 [55] [7050 [413] [39357-0004 oo! | 05 75 169] [14.00 [551] [39357-0005 [393590003 335 06 210 [83] [17.50 [689] [39357-0006 mn 07 245 [96] [2100 [827] [39357-0007 | 167_| 08 28.0 [1.10] [2450 [965] [39357-0008 350 a I 09 315 [424] [28.00 [1402] [39357-0009 got 065 10 35.0 [138] [3150 [1.240] [39357-0010 138 4 385 [452] [35.00 an 39357-0011 | 2 42.0 [165] | 38.50 [1516] 39357-0012 0.51 3.00 5 | 3 455 [179] [42.00 [1654] [39357-0013 020 138 0.89.5 y 49.0 [193] 145.50 [1791] [39357-0014 7.29 035 5 525 (2.071 149.00 [1929] [39357-0015 587 8 6 56.0 [2.20] [52.50 12.067] [39357-0016 7 595 (2.34) 156.00 12.205] |39357-0017 8 63.0 [2.48] 159.50 [2.343] [39357-0018 9 66.5 [2.62] 163.00 12.480] |39357-0019 20 70.0 [2.76] 166.50 [2.618] [39357-0020 21 735 (2891 170.00 [2.756] [39357-0021 3.90 22 77.0 [3.03] 17350 [2.894] [39357-0022 138 23 805 [3.17] [77.00 [3.031] 39357-0023 2h 84.0 [3.34] 180.50 [3.169] [39357-0024 NOTES 5 875 [3.44] 184.00 [3.307] [39357-0025 1.10 1, MATERIAL: SEE TABLE "Ne 2. FINISHES: SEE TABLE 3, ASSEMBLY IS ROHS COMPLIANT BY EXEMPTION. COMPONENTS MARKED WITH AN ASTERISK (x) ARE ROHS = =T Jouauy| GENERAL TOLERANCES DIMENSION STYLE SCRE] DESGN NTS 7 &) -] THIRD. ANGLE COMPLIANT BY EXEMPTION, ALL OTHERS ARE ROHS COMPLIANT. So =. &| |syvpors) (UNLESS SPECIFIED) MM/IN 11 INCH PROJECTION Zee e mm INCH _ | DRAWN BY DATE TTLE {8= Slz\W-0 [cpcaces[e--- _[z--- ___[CLYORK 2010/12/10 3.5MM EUROSTYLE LOW, za r 3 PLACES|t --- 14.005 [CHECKED BY DATE SINGLE ROW FIXED BLOCK 4 |XX |SCREW, M2 COPPER ALLOY NICKEL mS EIN-0 [ZPLACES|EO1a [#010 TITUS 2010/12/10 <eSSiwy + APPROVED BY DATE 3 |XX [CAGE CLAMP (x) COPPER ALLOY NICKEL ce Bee 1 PLACE [E03 Ee TITUS oot0/12/45| f'e&x ~=MOLEX INCORPORATED 2 XX TERMINAL, PC COPPER ALLOY TIN Oo S 33 e MATERIAL NO. DOCUMENT NO. SHEET NO. aQavjzx<k DRAFT WHERE APPLICABLE} SEE CHART SD-39357-001 1 OF 1 tt _INSULATOR POLYAMIDE BLACK <055 <_ WITH? DRE Ns SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ITEM | QTY. | DESCRIPTION MATERIAL FINISH F wu INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_ME_T Rev. E 2006/04/15 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1