STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-91611
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990 REVISION LEVEL
B SHEET 3
DSCC FORM 2234
APR 97
1.3 Absolute maximum ratings. 1/ 2/
Supply voltage range (VCC).................................................................................. -0.5 V dc to +7.0 V dc
DC input voltage range (VIN)................................................................................ -0.5 V dc to VCC + 0.5 V dc
DC output voltage range (VOUT)........................................................................... -0.5 V dc to VCC + 0.5 V dc
Input clamp diode current .................................................................................... 20 mA
Output clamp diode current.................................................................................. 20 mA
DC output current................................................................................................. 50 mA
DC VCC or GND current (per pin)......................................................................... 50 mA
Maximum power dissipation (PD)......................................................................... 500 mW
Storage temperature range (TSTG) ....................................................................... -65C to +150C
Lead temperature (soldering, 10 seconds)........................................................... +300C
Thermal resistance, junction-to-case (JC)........................................................... See MIL-STD-1835
Junction temperature (TJ) .................................................................................... +175C 3/
1.4 Recommended operating conditions. 1/ 2/ 4/
Supply voltage range (VCC).................................................................................. 4.5 V dc to +5.5 V dc
Input voltage range (VIN)...................................................................................... +0.0 V dc to VCC
Output voltage range (VOUT)................................................................................. +0.0 V dc to VCC
Case operating temperature range (TC)............................................................... -55C to +125C
Input rise or fall times (VCC = 4.5 V to 5.5 V)........................................................ 0 to 8 ns/V
Minimum setup time, data (Dn) to clock (CP) (ts1):
T
C = +25C, VCC = 4.5 V............................................................................... 3.5 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 4.0 ns
Minimum setup time, enable (EN) to (CP) (ts2):
T
C = +25C, VCC = 4.5 V............................................................................... 3.5 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 4.0 ns
Minimum hold time, Dn to CP, (th1):
T
C = +25C, VCC = 4.5 V............................................................................... 2.5 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 2.5 ns
Minimum hold time, EN to CP, (th2):
T
C = +25C, VCC = 4.5 V............................................................................... 2.0 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 2.0 ns
Minimum pulse width CPn high or low (tW1):
T
C = +25C, VCC = 4.5 V............................................................................... 6.0 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 6.0 ns
Minimum pulse width clear (CLR) low (tW2):
T
C = +25C, VCC = 4.5 V............................................................................... 6.0 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 7.0 ns
Minimum recovery time, CLR to CP (trec):
T
C = +25C, VCC = 4.5 V............................................................................... 4.0 ns
T
C = -55C and +125C, VCC = 4.5 V............................................................ 4.5 ns
Maximum clock frequency, (fmax):
T
C = +25C, VCC = 4.5 V............................................................................... 95 MHz
T
C = -55C and +125C, VCC = 4.5 V............................................................ 95 MHz
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ Unless otherwise noted, all voltages are referenced to GND.
3/ Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening conditions in
accordance with method 5004 of MIL-STD-883.
4/ Unless otherwise specified, the values listed above shall apply over the full VCC and TC recommended operating range.