2 mm pitch connector A-type, 110-contact daughter-board mounted female connector (shielded type) NCBA-SUK110LFPGTA+ For PCB Right-angle Press-in IEC917/IEC61076-4-101 Configuration of product Part No. NCBA- SU K 110 LFP G T A+ Contact plating Series name G: Min. 0.76 m Gold plate Shield plate SU: With on the upper side Type K: With polarity key (A type) No. of contacts: 110 Type of contact LFP: Right-angle jack (female) press-in 49.9 MAX. 1 2 1.8 210=20 210=20 ab cd e 2 24=8 48 3.7 5 10.95 11 3.3 15 2 24=8 20 12.25 11.4 25 f e d c b a f f 9.6 3 10.8 10 Holes in "f" row are located at odd numbered lines for tails of shield plate (upper) 224=48 123-o0.60.05 (Hole diameter: 0.70.025mm, 25m or more copper plating) 2 25 20 15 11 5 Recommended PCB layout Board thickness: t = 1.6 Components Insulator A TM Contacts Insulator B Shield plate (upper) Mating connectors: NCBA-( )K110SMPGTA( )+ NCB-( )K110SMPGA( ) Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others 1 1.5 2 25=10 f e d c b a Edge of PCB