IEC Inlet Filters FN 9246 High Performance IEC Inlet Filter n n n n Rated currents up to 20A Optional medical versions (B type) Rear mounting Excellant attenuation in the lower frequency range Technical specifications Maximum continuous operating voltage: Operating frequency: Rated currents: Approvals by rated current: Typical electrical schematic Protection category: Temperature range (operation and storage): Design corresponding to: Flammability corresponding to: MTBF @ 40C/230V (Mil-HB-217F): 250VAC, 50/60Hz dc to 400Hz 1 to 20A @ 50C 1 to 10A (Semko) 16A (Semko) for 16 and 20A types 1 to 20A (UL, CSA) P -> PE 2000VAC for 2 sec (standard types) P -> PE 2500VAC for 2 sec (B types) P -> N 1100VAC for 2 sec (1 to 10A types) P -> N 1100VDC for 2 sec (16 and 20A types) IP40 according to IEC 60529 -25C to +85C (25/85/21) UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 UL 94V-2 or better 1,600,000 hours The FN 9246 IEC inlet filter combines an n High potential test voltage: Approvals Features and benefits Cx 2xL R Cx1 P P` N N` PE PE 2xCy Line Load Typical applications Excellent conducted attenuation perform- n Electrical and electronic equipment IEC inlet and mains filter with excellent filter ance, based on chokes with high saturation n Small to medium-sized machines and attenuation in a small form factor. Choosing resistance and excellent thermal behavior. the FN 9246 product line brings you the rapid n Rear mounting. availability of a standard filter associated with n Optional low leakage current versions for household equipment n Single-phase power supplies, switch-mode power supplies medical applications. n Test and measurement equipment IEC connector filters are a practical solution n Rated currents up to 20A. n Building automation helping you to pass EMI system approval n Custom-specific versions are available on n Medical equipment request. n Lighting application the necessary safety acceptances. Standard in a short time. A wide selection on current ratings and low leakage versions for medical applications are designed to offer you the desired solution. > Components > FN 9246 Filter selection table Filter Rated current @ 40C (25C) Leakage current* @ 230VAC/50Hz Inductance L FN 9246-1-06 FN 9246-3-06 FN 9246-6-06 FN 9246-10-06 FN 9246-12-06 FN 9246-15-06 FN 9246-16-06 FN 9246-20-06 [A] 1 (1.2) 3 (3.5) 6 (7.2) 10 (12) 12 (14) 15 (18) 16 (18.5) 20 (23) [A] 373 373 373 373 373 373 797 797 [mH] 50 14 7 3 1.85 0.89 2.5 1.5 FN FN FN FN FN FN FN FN 1 (1.2) 3 (3.5) 6 (7.2) 10 (11.6) 12 (14) 15 (18) 16 (18.5) 20 (23) 2 2 2 2 2 2 2 2 50 14 7 3 1.85 0.89 2.5 1.5 * 9246B-1-06 9246B-3-06 9246B-6-06 9246B-10-06 9246B-12-06 9246B-15-06 9246B-16-06 9246B-20-06 Capacitance Cx Cy [F] 1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.22 Resistance Output connections R [nF] 2.2 2.2 2.2 2.2 2.2 2.2 4.7 4.7 [k] 470 -06 470 -06 470 -06 470 -06 470 -06 470 -06 470 -06 470 -06 [g] 140 140 140 140 140 140 275 275 470 470 470 470 470 470 470 470 140 140 140 140 140 140 275 275 1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.22 -06 -06 -06 -06 -06 -06 -06 -06 Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Product selector FN 9246x-yy-.. 06: Faston 6.3 x 0.8mm (spade/soldering) 1 to 20: Rated current Standard IEC inlet type C14 (1 to 15A types), C20 (16 and 20A types) Blank: Standard version B: Medical version (with bleed resistor and without Y2-capacitor) For example: FN 9246-6-06, FN 9246B-10-06 Typical filter attenuation Per CISPR 17; A = 50/50 sym; B = 50/50 asym; C = 0.1/100 sym; D = 100/0.1 sym 1A types 3 to 10A types 12 and 15A types Weight 16 and 20A types > Components > FN 9246 Mechanical data 1 to 15A types K 16 and 20A types IEC plug type C14 O L J I IEC plug type C20 O L K J I 6.3 x 0.8 6.3 x 0.8 R R C E A E Q F D C A Q G F G D B B Panel cut out N C P M H Dimensions 1A 3A 6A A 57.15 57.15 57.15 B 30 30 30 C 40 40 40 D 47 47 47 E 31 31 31 F 3 3 3 G 24 24 24 H O3.5 O3.5 O3.5 I 15.5 15.5 15.5 J 8.5 8.5 8.5 K 14 14 14 L 8 8 8 M R 1.5 R 1.5 R 1.5 N 25 25 25 O 11 11 11 P 32 32 32 Q 15 15 15 R 10A 12A 15A 16A 20A 57.15 30 40 47 31 3 24 O3.5 15.5 8.5 14 8 R 1.5 25 11 32 15 M3 x 10 max. 57.15 30 40 47 31 3 24 O3.5 15.5 8.5 14 8 R 1.5 25 11 32 15 57.15 30 40 47 31 3 24 O3.5 15.5 8.5 14 8 R 1.5 25 11 32 15 60 35 45 75 36 3 28 O3.5 15.5 8.5 14 8 R 1.5 29 11 37 17.5 60 35 45 75 36 3 28 O3.5 15.5 8.5 14 8 R 1.5 29 11 37 17.5 All dimensions in mm; 1 inch = 25.4mm Tolerances according: ISO 2768-m / EN 22768-m Your local partner: To find your local partner within Schaffner's global network, please go to www.schaffner.com May 2011 Headquarters and global innovation and development center Schaffner Group Nordstrasse 11 4542 Luterbach Switzerland T +41 32 681 66 26 F +41 32 681 66 30 info@schaffner.ch www.schaffner.com Sales and application centers China Schaffner EMC Ltd. Shanghai Building 11, Lane 1365 East Kangqiao Road Shanghai 201319 T +86 21 6813 9855 F +86 21 6813 9811 cschina@schaffner.com www.schaffner.com Germany Schaffner Deutschland GmbH Schoemperlenstrasse 12B 76185 Karlsruhe T +49 721 56910 F +49 721 569110 germanysales@schaffner.com Finland Schaffner Oy Tynninkuja 7 08700 Lohja T +358 19 35 72 71 F +358 19 32 66 10 finlandsales@schaffner.com France Schaffner EMC S.A.S. 112, Quai de Bezons 95103 Argenteuil T +33 1 34 34 30 60 F +33 1 39 47 02 28 francesales@schaffner.com Italy Schaffner EMC S.r.l. Via Galileo Galilei, 47 20092 Cinisello Balsamo (MI) T +39 02 66 04 30 45/47 F +39 02 61 23 943 italysales@schaffner.com Japan Schaffner EMC K.K. Mitsui-Seimei Sangenjaya Bldg. 7F 1-32-12, Kamiuma, Setagaya-ku Tokyo 154-0011 T +81 3 5712 3650 F +81 3 5712 3651 japansales@schaffner.com www.schaffner.jp Sweden Schaffner EMC AB Turebergstorg 1, 6 19147 Sollentuna T +46 8 5792 1121 / 22 F +46 8 92 96 90 swedensales@schaffner.com Switzerland Schaffner EMV AG Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 F +41 32 681 66 41 sales@schaffner.ch To find your local partner within Schaffner`s global network, please go to Singapore Schaffner EMC Pte Ltd. Blk 3015A Ubi Road 1 05-09 Kampong Ubi Industrial Estate T +65 6377 3283 F +65 6377 3281 singaporesales@schaffner.com (c) 2011 Schaffner EMC. Specifications subject to change without notice. All trademarks recognized. Spain Schaffner EMC Espana Calle Calendula 93, Miniparc III, Edificio E El Soto de la Moraleja, Alcobendas 28109 Madrid T +34 618 176 133 spainsales@schaffner.com Taiwan Schaffner EMV Ltd. 6th Floor, No 413 Rui Guang Road Neihu District Taipei City 114 T +886 2 87525050 F+886 2 87518086 taiwansales@schaffner.com Thailand Schaffner EMC Co. Ltd. Northern Region Industrial Estate 67 Moo 4 Tambon Ban Klang Amphur Muang P.O. Box 14 Lamphun 51000 T +66 53 58 11 04 F +66 53 58 10 19 thailandsales@schaffner.com UK Schaffner Ltd. 5 Ashville Way Molly Millars Lane Wokingham Berkshire RG41 2PL T +44 118 9770070 F +44 118 9792969 uksales@schaffner.com www.schaffner.uk.com USA Schaffner EMC Inc. 52 Mayfield Avenue Edison, New Jersey 08837 T +1 732 225 9533 F +1 732 225 4789 usasales@schaffner.com www.schaffner.com/us www.schaffner.com May 2011 Schaffner is an ISO-registered company. Its products are designed and manufactured under the strict quality and environmental requirements of the ISO 9001 and ISO 14001 standards. This document has been carefully checked. However, Schaffner does not assume any liability for errors or inaccuracies.