SB520 THRU SB5100
HIGH CURRENT SCHOTTKY BARRIER RECTIFIERS
l Low cost
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
l Metal to silicon rectifier, Majority carrier conduction
l Low power loss, high efficiency
l High current capability, Low VF
l High surge capacity
l Epitaxial construction
l For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
l High temperature soldering guaranteed: 250 ¢J/10
seconds/.375”(9.5mm) lead lengths at 5 lbs., (2.3kg) tension
Case: Molded plastic, DO-201AD
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.04 ounce, 1.12 gram
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Resistive or inductive load.
For capacitive load, derate current by 20%.SB520 SB530 SB540 SB550 SB560 SB580 SB5100 UNITS
Maximum Recurrent Peak Reverse Voltage 20 30 40 50 60 80 100 V
Maximum RMS Voltage 14 21 28 35 42 56 80 V
Maximum DC Blocking Voltage 20 30 40 50 60 80 100 V
Maximum Average Forward Rectified
Current, .375”(9.5mm) Lead Length(Fig. 1)5.0A
Peak Forward Surge Current, 8.3ms single
half sine wave superimposed on rated
load(JEDEC method)
150 A
Maximum Instantaneous Forward Voltage
at 5.0A0.55 0.70 0.85 V
Maximum DC Reverse Current TA=25 ¢J
Reverse Voltage TA=100 ¢J 0.5
50.0mA
Typical Thermal Resistance (Note 1) R£KJL15 10 ¢J/W
Typical Junction capacitance (Note 2)500 380
F
Operating and Storage Temperature Range
T
,T
-50 TO +125 ¢J
NOTES:
Thermal Resistance Junction to Lead Vertical PC Board Mounting .375(9.5mm) Lead Lengths
Measured at 1 MHz and applied reverse voltage of 4.0 Volts