6
TM
SUSSEX SEMICONDUCTOR, INC.
Zeners
SECTION 6
6
6
50 WATT TO-3 ZENER....................................................................................................6-1
TO3-SZ35-6.8 THROUGH TO3-SZ35-200
10 W ATT DO-4 ZENER...................................................................................................6-4
DO4-SZ16-6.8 THROUGH DO4-SZ16-200
50 W ATT DO-5 ZENER...................................................................................................6-7
DO5-SZ35-6.8 THROUGH DO5-SZ35-200
TABLE OF CONTENTS
DEVICE TYPE PAGE NUMBER
1)
2)
3)
PRINTED BY SUSSEX SEMICONDUCTOR, INC. JANUARY 2000
REVISION 3.0
MY GAL, SHE’S NO SALLY
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
TABLE OF CONTENTS
6
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-1
50 WATT MAX
TO - 3 ZENERS
TO3 CUSTOM ORDERING SPECIFIER
TO3 - SZ 35 - 6.8 - 5 - 1850 -
DIE SPECIFICATIONS
DEVICE
CODE ZENER DIE NOMINAL
ZENER VOLTAGE ZENER TEST
CURRENT
♦BLANK- INDICATES STANDARD POLARITY
ANODE TO CASE
♦R- INDICATES REVERSE POLARITY
CATHODE TO CASE
TOLERANCE
CODE TOLERANCE
5 ±5%
10 ±10%
20 ±20%
35* .200sq
30 .180sq
25 .165sq
AVAILABLE SIZES
CODE DIE SIZE
*50W DEVICE MUST USE
.200sq DIE
TO - 3
DEVICE SPECIFICATIONS
♦Hermetically Sealed Metal Package
♦Designed for Military and Industrial Use
♦Each Device Individually Inspected
♦Standard Polarity Anode to Case
♦Available Tolerances: ±5%, ±10%, ±20%
♦Standard TO-3 Package With .040” Nom. Dia. Pins
♦Operating and Storage Temperature: -65°C to
+150°C
♦Forward Voltage @ 10A: 1.5V
♦Copper Leads Provide Secure Connections and
Good Conductivity
GLASS PASSIVATED TO-3 ZENER
ZENER VOLTAGES - 6.8 TO 200 VOLTS
50 WATT MAXIMUM POWER DISSIPATION
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-2
TO-3 - CONTINUED
NOTES
NO TE 1 ♦ELECTRICAL CHARACTERISTICS MEASURED AT 25°C UNLESS O THER WISE STATED .
♦TABLE DEMONSTRATES DEVICE CHARA CTERISTICS FOR A 50W DEVICE (SZ35 CHIP).
NO TE 2 ♦VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C .
♦IZT IS SELECTED SO THAT A CONSTANT 12.5W POWER DISSIPATION IS OBTAINED (JUNCTION TEMPERATURE RISE
12.75°C).
NO TE 3 ♦ZENER IMPED ANCE IS DERIVED FR OM 60HZ A C V OLTAGE WHICH RESULTS WHEN A C CURRENT RMS VALUE
EQU AL TO 10% OF D.C ZENER CURRENT IS SUPERIMPOSED ON IZT.
♦ZENER IMPED ANCE IS MEASURED AT 2 POINTS ON THE REVERSE BREAKDOWN CURVE.
NO TE 4 ♦IZM VALUES DERIVED FOR A ±5% VZ TOL.
♦IZM IS THE VALUE OF ZENER CURRENT AT WHICH POINT 50W POWER DISSIPATION RESULTS.
JEDEC
PART
NUMBER
SUSSEX PART
NUMBER
NOMINAL
ZENER
VO LTAG E
VZ @ IZT
(N O T E 2)
VOLTS
ZENER
TEST
CURRENT
(IZT)
mA ZZT @ IZT
OHMS
ZZK @
5mA (IZK)
OHMS
MAX. DC
ZENER
CURRENT
(IZM) @ 75 °C
STUD TEMP.
(NO TE 4)
mA
TYPICAL
ZENER
VO LT AG E
TEMP.
COEFF.
% /°C µA V
1N2804B TO3-SZ35-6.8-5-1850 6.8 1850 0.2 70 7400 .040 150 4.5
1N2805B TO3-SZ35-7.5-5-1700 7.5 1700 0.3 70 6600 .045 100 5.0
1N2806B TO3-SZ35-8.2-5-1500 8.2 1500 0.4 70 5800 .048 50 5.4
1N2807B TO3-SZ35-9.1-5-1370 9.1 1370 0.5 70 5300 .050 25 6.1
1N2808B TO3-SZ35-10-5-1200 10.0 1200 0.6 80 4800 .055 25 6.7
1N2809B TO3-SZ35-11-5-1100 11.0 1100 0.8 80 4300 .060 10 8.4
1N2810B TO3-SZ35-12-5-1000 12.0 1000 1.0 80 4000 .065 10 9.1
1N2811B TO3-SZ35-13-5-960 13.0 960 1.1 80 3700 .065 10 9.9
1N2812B TO3-SZ35-14-5-890 14.0 890 1.2 80 3400 .070 10 10.6
1N2813B TO3-SZ35-15-5-830 15.0 830 1.4 80 3100 .070 10 11.4
1N2814B TO3-SZ35-16-5-780 16.0 780 1.6 80 2950 .070 10 12.2
1N2815B TO3-SZ35-17-5-740 17.0 740 1.8 80 2750 .075 10 13.0
1N2816B TO3-SZ35-18-5-700 18.0 700 2.0 80 2550 .075 10 13.7
1N2817B TO3-SZ35-19-5-660 19.0 660 2.2 80 2450 .075 10 14.4
1N2818B TO3-SZ35-20-5-630 20.0 630 2.4 80 2350 .075 10 15.2
1N2819B TO3-SZ35-22-5-570 22.0 570 2.5 80 2100 .080 10 16.7
1N2820B TO3-SZ35-24-5-520 24.0 520 2.6 80 1950 .080 10 18.2
1N2821B TO3-SZ35-25-5-500 25.0 500 2.7 90 1850 .080 10 19.0
1N2822B TO3-SZ35-27-5-460 27.0 460 2.8 90 1650 .085 10 20.6
1N2823B TO3-SZ35-30-5-420 30.0 420 3.0 90 1550 .085 10 22.8
1N2824B TO3-SZ35-33-5-380 33.0 380 3.2 90 1450 .085 10 25.1
1N2825B TO3-SZ35-36-5-350 36.0 350 3.5 90 1300 .085 10 27.4
1N2826B TO3-SZ35-39-5-320 39.0 320 4.0 90 1175 .090 10 29.7
1N2827B TO3-SZ35-43-5-290 43.0 290 4.5 90 1075 .090 10 32.7
1N2828B TO3-SZ35-45-5-280 45.0 280 4.5 100 1030 .090 10 34.2
1N2829B TO3-SZ35-47-5-270 47.0 270 5.0 100 950 .090 10 35.8
1N2830B TO3-SZ35-50-5-250 50.0 250 5.0 100 935 .090 10 38.0
1N2831B TO3-SZ35-51-5-245 51.0 245 5.2 100 925 .090 10 38.8
1N2832B TO3-SZ35-56-5-220 56.0 220 6.0 110 825 .090 10 42.6
1N2833B TO3-SZ35-62-5-200 62.0 200 7.0 120 735 .090 10 47.1
1N2834B TO3-SZ35-68-5-180 68.0 180 8.0 140 670 .090 10 51.7
1N2835B TO3-SZ35-75-5-170 75.0 170 9.0 150 600 .090 10 56.0
1N2836B TO3-SZ35-82-5-150 82.0 150 11 160 550 .090 10 62.2
1N2837B TO3-SZ35-91-5-140 91.0 140 15 180 470 .090 10 69.2
1N2838B TO3-SZ35-100-5-120 100.0 120 20 200 450 .090 10 76.0
1N2839B TO3-SZ35-105-5-120 105.0 120 25 210 430 .095 10 79.8
1N2840B TO3-SZ35-110-5-110 110.0 110 30 220 410 .095 10 83.6
1N2841B TO3-SZ35-120-5-100 120.0 100 40 240 375 .095 10 91.2
1N2842B TO3-SZ35-130-5-95 130.0 95 50 275 345 .095 10 98.8
1N2843B TO3-SZ35-150-5-85 150.0 85 75 400 300 .095 10 114.0
1N2844B TO3-SZ35-160-5-80 160.0 80 80 450 285 .095 10 121.6
1N2845B TO3-SZ35-180-5-68 180.0 68 90 525 250 .095 10 136.8
1N2846B TO3-SZ35-200-5-65 200.0 65 100 600 220 .100 10 152.0
TABLE 1A - STAN D AR D DEVICE ELECTRICA L SPECIFICA TION S
(
NOTE 1
)
MAX. ZENER
IMPEDANCE
(N O T E 3)
MAXIMUM
LEAKAGE
CURRENT
IR @ VR
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-3
TO-3 - CONTINUED
10-1
100
101
102
103
100101102103104
TO-3-SZ35-6.8-5-1850
TO-3-SZ35-10-5-1200
TO-3-SZ35-33-5-380
TO-3-SZ35-200-5-65
TO-3-SZ35-100-5-120
TO-3-SZ35-75-5-170
FIGURE 2A - TO-3 ZENER IMPEDANCE VS.
ZENER CURRENT
FIGURE1A - TO-3 DERATING CURVE
0
2
4
6
8
10
12
0 25 50 75 100 125 150 175
* DEV ICE CA SE TEMP
MAINTAINED BY MOU NTING
THE DEVICE ON A
SUI T ABL E H EAT SINK
*DEVICE CASE T EMP
MAINTA IN ED BY MOUNTING
THE DEVICE ON A
SUI TABLE HEAT SINK
60
50
40
30
20
10
CASE TEMPERATURE (°C)
ZENER IMPEDANCE (Ohms)
ZENER CURRENT (mA)
RATED POWER DISSIPATION
(Watts)
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-4
10 WATT MAX
DO - 4 ZENERS
DO4 CUSTOM ORDERING SPECIFIER
DO4 - SZ 16 - 8.2 - 5 - 305 -
DIE SPECIFICATIONS
DEVICE
CODE ZENER DIE NOMINAL
ZENER VOLTAGE ZENER TEST
CURRENT
♦BLANK- INDICATES STANDARD POLARITY
ANODE TO BASE
♦R- INDICATES REVERSE POLARITY
CATHODE TO BASE
TOLERANCE
CODE TOLERANCE
5 ±5%
10 ±10%
20 ±20%
16* .115sq
8 .100sq
5 .095sq
AVAILABLE SIZES
CODE DIE SIZE
*10W DEVICE MUST USE
.115sq DIE
DO - 4
DEVICE SPECIFICATIONS
♦Hermetically Sealed Glass to Metal Package
♦Designed for Military and Industrial Use
♦Each Device Individually Inspected
♦Standard Polarity Anode to Base
♦Available Tolerances: ±5%, ±10%, ±20%
♦7/16” Hexagon Stud with 10-32 Threads
♦Operating and Storage Temperature: -65°C to
+150°C
♦Forward Voltage @ 2.0 A: 1.5 V
♦Copper Terminals Provide Secure Connections
and Good Conductivity
GLASS PASSIVATED DO-4 ZENER
ZENER VOLTAGES - 6.8 TO 200 VOLTS
10 WATT MAXIMUM POWER DISSIPATION
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-5
DO-4 - CONTINUED
NOTES
NO TE 1 ♦ELECTRICAL CHARACTERISTICS MEASURED AT 25°C UNLESS O THER WISE STATED .
♦TABLE DEMONSTRATES DEVICE CHARA CTERISTICS FOR A 10W DEVICE (SZ16 CHIP).
NO TE 2 ♦VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C .
♦IZT IS SELECTED SO THAT A CONSTANT 12.5W POWER DISSIPATION IS OBTAINED (JUNCTION TEMPERATURE RISE
12.75°C).
NO TE 3 ♦ZENER IMPED ANCE IS DERIVED FR OM 60HZ A C V OLTAGE WHICH RESULTS WHEN A C CURRENT RMS VALUE
EQU AL TO 10% OF D.C ZENER CURRENT IS SUPERIMPOSED ON I Z.
♦ZENER IMPED ANCE IS MEASURED AT 2 POINTS ON THE REVERSE BREAKDOWN CURVE.
NO TE 4 ♦IZM VALUES DERIVED FOR A ±5% VZ TOL.
♦IZM IS THE VALUE OF ZENER CURRENT AT WHICH POINT 10W POWER DISSIPATION RESULTS.
JEDEC
PART
NUMBER
SUSSEX PART
NUMBER
NOMINAL
ZENER
VOLTAG E
VZ @ IZT
(N O T E 2 )
VOLTS
ZENER
TEST
CURRENT
(IZT)
mA ZZT @ IZT
OHMS
ZZK @ 1mA
(IZK)
OHMS
MAX. DC
ZENER
CURRENT
(IZM) @ 75°C
ST UD TEM P.
(N O T E 4 )
mA
TYPICAL
ZENER
VOLTAGE
TEMP.
COEFF.
% /°C µA V
1N2970B DO4-SZ16-6.8-5-370 6.8 370 1.2 500 1320 0.04 150 5.2
1N2971B DO4-SZ16-7.5-5-335 7.5 335 1.3 250 1180 0.045 100 5.7
1N2972B DO4-SZ16-8.2-5-305 8.2 305 1.5 250 1040 0.048 50 6.2
1N2973B DO4-SZ16-9.1-5-275 9.1 275 2 250 960 0.051 25 6.9
1N2974B DO4-SZ16-10-5-250 10 250 3 250 860 0.055 25 7.6
1N2975B DO4-SZ16-11-5-230 11 230 3 250 780 0.06 10 8.4
1N2976B DO4-SZ16-12-5-210 12 210 3 250 720 0.065 10 9.1
1N2977B DO4-SZ16-13-5-190 13 190 3 250 660 0.065 10 9.9
1N2978B DO4-SZ16-14-5-180 14 180 3 250 600 0.07 10 10.5
1N2979B DO4-SZ16-15-5-170 15 170 3 250 560 0.07 10 11.4
1N2980B DO4-SZ16-16-5-155 16 155 4 250 530 0.07 10 12.2
1N2981B DO4-SZ16-17-5-145 17 145 4 250 500 0.075 10 13
1N2982B DO4-SZ16-18-5-140 18 140 4 250 460 0.075 10 13.7
1N2983B DO4-SZ16-19-5-130 19 130 4 250 440 0.075 10 14
1N2984B DO4-SZ16-20-5-125 20 125 4 250 420 0.075 10 15.2
1N2985B DO4-SZ16-22-5-115 22 115 5 250 380 0.08 10 16.7
1N2986B DO4-SZ16-24-5-105 24 105 5 250 350 0.08 10 18.2
1N2987B DO4-SZ16-25-5-100 25 100 6 250 310 0.08 10 18.2
1N2988B DO4-SZ16-27-5-95 27 95 7 250 300 0.085 10 20.6
1N2989B DO4-SZ16-30-5-85 30 85 8 300 280 0.085 10 22.8
1N2990B DO4-SZ16-33-5-75 33 5 9 300 260 0.085 10 25.1
1N2991B DO4-SZ16-36-5-70 36 70 10 300 230 0.085 10 27.4
1N2992B DO4-SZ16-39-5-65 39 65 11 300 210 0.09 10 29.7
1N2993B DO4-SZ16-43-5-60 43 60 12 400 195 0.09 10 32.7
1N2994B DO4-SZ16-45-5-55 45 55 13 400 185 0.09 10 33
1N2995B DO4-SZ16-47-5-55 47 55 14 400 175 0.09 10 35.8
1N2996B DO4-SZ16-50-5-50 50 50 15 500 165 0.09 10 36
1N2997B DO4-SZ16-51-5-50 51 50 15 500 160 0.09 10 38.8
1N2998B DO4-SZ16-52-5-50 52 50 15 500 160 0.09 10 39
1N2999B DO4-SZ16-56-5-45 56 45 16 500 150 0.09 10 42.6
1N3000B DO4-SZ16-62-5-40 62 40 17 600 130 0.09 10 47.1
1N3001B DO4-SZ16-68-5-37 68 37 18 600 120 0.09 10 51.7
1N3002B DO4-SZ16-75-5-33 75 33 22 600 110 0.09 10 56
1N3003B DO4-SZ16-82-5-30 82 30 25 700 100 0.09 10 62.2
1N3004B DO4-SZ16-91-5-28 91 28 35 800 85 0.09 10 69.2
1N3005B DO4-SZ16-100-5-25 100 25 40 900 80 0.09 10 76
1N3006B DO4-SZ16-105-5-25 105 25 45 1000 75 0.095 10 76
1N3007B DO4-SZ16-110-5-23 110 23 55 1100 72 0.095 10 83.6
1N3008B DO4-SZ16-120-5-20 120 20 75 1200 68 0.095 10 91.2
1N3009B DO4-SZ16-130-5-19 130 19 100 1300 62 0.095 10 98.8
1N3010B DO4-SZ16-140-5-18 140 18 125 1400 58 0.095 10 100
1N3011B DO4-SZ16-150-5-17 150 17 175 1500 54 0.095 10 114
1N3012B DO4-SZ16-160-5-16 160 16 200 1600 50 0.095 10 121.6
1N3013B DO4-SZ16-175-5-14 175 14 250 1750 46 0.095 10 135
1N3014B DO4-SZ16-180-5-14 180 14 260 1850 45 0.095 10 136.8
1N3015B DO4-SZ16-200-5-12 200 12 300 2000 40 0.1 10 152
TABLE 1A - STANDARD DEVICE ELECTRICAL SPECIFICATIONS (N OT E 1 )
MAX. ZENER
IMPEDANCE
(N O T E 3 )
MAXIMUM
LEAKAGE
CURRENT
IR @ VR
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-6
0
2
4
6
8
10
12
0 25 50 75 100 125 150 175
* D EVIC E CASE TE M P
MA I NTAINED B Y MOUNTING
THE D E VICE ON A
SUITABLE HEAT SINK
*DEVICE CASE TEMP
MAINTAINED BY MOUNTING
THE DEVICE ON A
SUITABLE HEAT SINK
100
101
102
103
104
100101102103
DO-4-SZ16-10-5-250
DO-4-SZ16-100-5-25
DO-4-SZ16-75-5-33
DO-4-SZ16-200-5-300
FIGURE 3A - DO-4 DERATING CURVE FIGURE 4A - DO-4 ZENER IMPEDANCE VS.
ZENER CURRENT
CASE TEMPERATURE (°C)
ZENER IMPEDANCE (Ohms)
ZENER CURRENT (mA)
RATED POWER DISSIPATION
(Watts)
DO-4 - CONTINUED
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-7
50 WATT MAX
DO - 5 ZENERS
DO5 CUSTOM ORDERING SPECIFIER
DO5 - SZ 35 - 8.2 - 5 - 305 -
DIE SPECIFICATIONS
DEVICE
CODE ZENER DIE NOMINAL
ZENER VOLTAGE ZENER TEST
CURRENT
♦BLANK- INDICATES STANDARD POLARITY
ANODE TO BASE
♦R- INDICATES REVERSE POLARITY
CATHODE TO BASE
TOLERANCE
CODE TOLERANCE
5 ±5%
10 ±10%
20 ±20%
AVAILABLE SIZES
CODE DIE SIZE
*50W DEVICE MUST USE
.200sq DIE
35* .200sq
30 .180sq
25 .165sq
DO - 5
DEVICE SPECIFICATIONS
♦Hermetically Sealed Glass to Metal Package
♦Designed for Military and Industrial Use
♦Each Device Individually Inspected
♦Standard Polarity Anode to Base
♦Available Tolerances: ±5%, ±10%, ±20%
♦11/16” Hexagon Stud with 1/4-28 Threads
♦Operating and Storage Temperature: -65°C
to +150°C
♦Forward Voltage @ 10 A: 1.5V
♦Copper Terminals Provide Secure Connections
and Good Conductivity
GLASS PASSIVATED DO-5 ZENER
ZENER VOLTAGES - 6.8 TO 200 VOLTS
50 WATT MAXIMUM POWER DISSIPATION
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-8
DO-5 - CONTINUED
NO TE 1 ♦ELECTRICAL CHARACTERISTICS MEASURED AT 25°C UNLESS O THER WISE STATED .
♦TABLE DEMONSTRATES DEVICE CHARA CTERISTICS FOR A 50W DEVICE (SZ35 CHIP).
NO TE 2 ♦VZ MEASURED AT JUNCTION AND CASE TEMPERATURE BOTH AT 25°C .
♦IZT IS SELECTED SO THAT A CONSTANT 12.5W POWER DISSIPATION IS OBTAINED (JUNCTION TEMPERATURE
RISE 12.75°C).
NO TE 3 ♦ZENER IMPED ANCE IS DERIVED FR OM 60HZ A C V OLTAGE WHICH RESULTS WHEN A C CURRENT RMS VALUE
EQU AL TO 10% OF D.C ZENER CURRENT IS SUPERIMPOSED ON IZT.
♦ZENER IMPED ANCE IS MEASURED AT 2 POINTS ON THE REVERSE BREAKDOWN CURVE.
NO TE 4 ♦IZM VALUES DERIVED FOR A ±5% VZ TOL.
♦IZM IS THE VALUE OF ZENER CURRENT AT WHICH POINT 50W POWER DISSIPATION RESULTS.
NOTES
JEDEC
PART
NUMBER
SUSSEX PART
NUMBER
NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(N OT E 2)
VOLTS
ZENER
TEST
CURRENT
(IZT)
mA ZZT @ IZT
OHMS
ZZK @
5mA (IZK)
OHMS
MAX. DC
ZENER
CURRENT
(IZM) @ 75°C
STUD TEMP.
(N O T E 4 )
mA
TYPICAL
ZENER
VOLTAGE
TEMP.
COEFF.
% /°C µA V
1N3305B DO5-SZ35-6.8-5-1850 6.8 1850 0.2 70 6600 .040 150 4.5
1N3306B DO5-SZ35-7.5-5-1700 7.5 1700 0.3 70 5900 .045 100 5.0
1N3307B DO5-SZ35-8.2-5-1500 8.2 1500 0.4 70 5200 .048 50 5.4
1N3308B DO5-SZ35-9.1-5-1370 9.1 1370 0.5 70 4800 .050 25 6.1
1N3309B DO5-SZ35-10-5-1200 10.0 1200 0.6 80 4300 .055 25 6.7
1N3310B DO5-SZ35-11-5-1100 11.0 1100 0.8 80 3900 .060 10 8.4
1N3311B DO5-SZ35-12-5-1000 12.0 1000 1.0 80 3800 .065 10 9.1
1N3312B DO5-SZ35-13-5-960 13.0 960 1.1 80 3300 .065 10 9.9
1N3313B DO5-SZ35-14-5-890 14.0 890 1.2 80 3000 .070 10 11.4
1N3314B DO5-SZ35-15-5-830 15.0 830 1.4 80 2800 .070 10 11.4
1N3315B DO5-SZ35-16-5-780 16.0 780 1.6 80 2650 .070 10 12.2
1N3316B DO5-SZ35-17-5-740 17.0 740 1.8 80 2500 .075 10 13.0
1N3317B DO5-SZ35-18-5-700 18.0 700 2.0 80 2300 .075 10 13.7
1N3318B DO5-SZ35-19-5-660 19.0 660 2.2 80 2200 .075 10 13.7
1N3319B DO5-SZ35-20-5-630 20.0 630 2.4 80 2100 .075 10 15.2
1N3320B DO5-SZ35-22-5-570 22.0 570 2.5 80 1900 .080 10 16.7
1N3321B DO5-SZ35-24-5-520 24.0 520 2.6 80 1750 .080 10 18.2
1N3322B DO5-SZ35-25-5-500 25.0 500 2.7 90 1550 .080 10 18.2
1N3323B DO5-SZ35-27-5-460 27.0 460 2.8 90 1500 .085 10 20.6
1N3324B DO5-SZ35-30-5-420 30.0 420 3.0 90 1400 .085 10 22.8
1N3325B DO5-SZ35-33-5-380 33.0 380 3.2 90 1300 .085 10 25.1
1N3326B DO5-SZ35-36-5-350 36.0 350 3.5 90 1150 .085 10 27.4
1N3327B DO5-SZ35-39-5-320 39.0 320 4.0 90 1050 .090 10 29.7
1N3328B DO5-SZ35-43-5-290 43.0 290 4.5 90 975 .090 10 32.7
1N3329B DO5-SZ35-45-5-280 45.0 280 4.5 100 930 .090 10 32.7
1N3330B DO5-SZ35-47-5-270 47.0 270 5.0 100 880 .090 10 35.8
1N3331B DO5-SZ35-50-5-250 50.0 250 5.0 100 830 .090 10 38.0
1N3332B DO5-SZ35-51-5-245 51.0 245 5.2 100 810 .090 10 38.8
1N3333B DO5-SZ35-52-5-240 52.0 240 5.5 100 790 .090 10 42.6
1N3334B DO5-SZ35-56-5-220 56.0 220 6.0 110 740 .090 10 42.6
1N3335B DO5-SZ35-62-5-200 62.0 200 7.0 120 660 .090 10 47.1
1N3336B DO5-SZ35-68-5-180 68.0 180 8.0 140 600 .090 10 51.7
1N3337B DO5-SZ35-75-5-170 75.0 170 9.0 150 540 .090 10 56.0
1N3338B DO5-SZ35-82-5-150 82.0 150 11 160 490 .090 10 62.2
1N3339B DO5-SZ35-91-5-140 91.0 140 15 180 420 .090 10 69.2
1N3340B DO5-SZ35-100-5-120 100.0 120 20 200 400 .090 10 76.0
1N3341B DO5-SZ35-105-5-120 105.0 120 25 210 380 .095 10 83.0
1N3342B DO5-SZ35-110-5-110 110.0 110 30 220 365 .095 10 83.0
1N3343B DO5-SZ35-120-5-100 120.0 100 40 240 335 .095 10 91.2
1N3344B DO5-SZ35-130-5-95 130.0 95 50 275 310 .095 10 99.8
1N3345B DO5-SZ35-140-5-90 140.0 90 60 325 290 .095 10 114.0
1N3346B DO5-SZ35-150-5-85 150.0 85 75 400 270 .095 10 114.0
1N3347B DO5-SZ35-160-5-80 160.0 80 80 450 250 .095 10 121.6
1N3348B DO5-SZ35-175-5-70 175.0 70 85 500 230 .095 10 121.6
1N3349B DO5-SZ35-180-5-68 180.0 68 90 525 220 .095 10 136.8
1N3350B DO5-SZ35-200-5-65 200.0 65 100 600 200 .100 10 152.0
TABLE 1A - STANDARD DEVICE ELECTRICAL SPECIFICATIONS (N OTE 1)
MAX. ZENER
IMPEDANCE
(N OT E 3)
MAXIMUM
LEAKAGE
CURRENT
IR @ VR
6
TM
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (239) 768-6800 FAX: (239) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
6-9
0
2
4
6
8
10
12
0 25 50 75 100 125 150 175
* DEVICE C A SE TEMP
MAINTA INED B Y MOUNTING
THE DEVICE ON A
SUITABL E H EAT SINK
*DEVICE CASE TEMP
MAINTAINED BY MOUNTING
THE DEVICE ON A
SUITABLE HEAT SINK
60
50
40
30
20
10
10-1
100
101
102
103
10010110210310
4
DO5-SZ35-6.8-5-1850
DO5-SZ35-10-5-120
0
DO5-SZ35-33-5-380
DO5-SZ35-200-5-65
DO5-SZ35-100-5-120
DO5-SZ35-75-5-170
FIGURE 6A - DO-5 ZENER IMPEDANCE VS.
ZENER CURRENT
FIGURE 5A - DO-5 DERATING CURVE
CASE TEMPERATURE (°C)
ZENER IMPEDANCE (Ohms)
ZENER CURRENT (mA)
RATED POWER DISSIPATION
(Watts)
DO-5 - CONTINUED
6
