Termination Boards Selection Guide 100-pin or 50-pin SCSI-type Connectors 3E-2 3E-2 3E-3 3E-3 3E-3 DIN-96DI DIN-96DO DIN-100S DIN-50S (Includes ACL-102100) (Includes ACL-102100) (Includes ACL-102100) (Includes ACL-10250) DIN-502S 50-pin Ribbon Connectors 3E-6 3E-4 3E-5 3E-6 DIN-24G or TB-24G TB-24R TB-24P TB-16P8R ( for Grayhill IO modules) (Includes ACL-10150-1.5) (Includes ACL-10150-1.5) (Includes ACL-10150-1.5) 3E-3 3E-4 DIN-50P 3E-5 DIN-24R 3E-6 DIN-24P TB-24 (Includes ACL-10150-1.5) 20-pin Header Connectors 3E-8 3E-8 3E-7 3E-7 3E-3 ACLD-9182A ACLD-9185 ACLD-9188 ACLD-9178 (Includes ACL-10120-1) (Includes ACL-10120-1) (Includes 2 ACL-10120-1) (Includes 2 ACL-10120-1) DIN-20P 37-pin D-type Connectors 3E-7 ACLD-9137 (male) ACLD-9137F (female) 3E-7 3E-9 3E-7 3E-3 ACLD-9138 ACLD-8125 ACLD-9188 (Includes ACL-10237-1) (Includes ACL-10137-1) (Includes 2 ACL-10120-1) DIN-37D 3D-1 DIN-96DI Termination Board with 96-Channel Opto-Isolated Digital Inputs Features 96 Opto-Isolated digital input channels For use with PCI-7396 AC or DC polarity-free DI Screw terminals for easy field wiring Specifications Termination Boards Numbers of channel: 96 Opto-isolator: PC3H4 Input impedence: 4.7K Ohms Input voltage range: 0~24VDC Input voltage threshold: * 20VDC for external 24V input * 8.8VDC for external 12V input * 1.8VDC for external 5V input Isolation voltage: 2,500 Vdc channel-to-ground DIN-96DO Connector: 100-Pin SCSI-type Dimension:112.7 mm x 225 mm Operating temp.: 0 ~ 60C Storage temp.: -20 ~ 80C Humidity: 5~95%, non-condensing Power consumption: * 5V: 48mA(max.) from SCSI cable * External digital input current: * 24V: 490mA(max.) * 12V: 250mA(max.) * 5V: 102mA(max.) Ordering Information DIN-96DI 96 Channel Isolated Digital Input Terminal Board (includes 1m ACL-105100-1) Termination Board with 96-Channel Opto-Isolated Digital Outputs Features 96 Opto-Isolated digital output channels For use with PCI-7396 On-board relay driver circuitry Screw terminals for easy field wiring Specifications Numbers of channel: 96 Opto-isolator: PC3H7 Output type: Darlingtoin transistors, open collector up to 35Vdc Sink current: * 350mA max.@ 100% duty, one of transistors device ON * 370mA @ duty 10% for all transistors devices ON * 140mA @ duty 50% for all transistors devices ON * 60mA @ duty 100% for all transistors devices ON 3D-2 Ordering Information Isolation voltage: 2500 Vrms Dimensions: 112.7 mm x 225.0 mm Operating temp.: 0C ~ 60C Storage temp.: -20~ 80C Power consumption: 5V: 102mA(max.) from cable DIN-96DO 96 Channel Isolated Digital Input Terminal Board(includes 1m ACL-105100-1) DIN Rail Screw Terminal Boards Features General Universal screw terminal boards for easily wiring DIN socket for easily mounting on DIN-rail DIN-100S DIN-100S General purpose termination board for 100-pin SCSI-II cable On-board connector type is female 100-pin Shipped with 1 meter ACL-102100 cable Dimensions: 157 x 112 x 51 mm3 (WxLxH) Termination Boards DIN-50S DIN-50S General purpose termination board for 50-pin SCSI -II cable On-board connector type is female 50-pin Plastic cover for protection of wiring Shipped with 1 meter ACL-102100 cable Dimension: 124 x 77 x 50 mm3 (WxLxH) DIN-502S DIN-502S Split 100 signals of 100-pin SCSI-II connector to two DIN-50S sockets Shipped with 1 meter ACL-10252 cable DIN-50P General purpose termination board for 50-pin ribbon DIN-50P flex cable Shipped with 1.5 meters ACL-10150-1.5 cable Dimension: 145 x 77 x 52 mm3 (WxLxH) DIN-37D General purpose termination board for D-type 37-pin cable On-board connector type is female 37-pin DIN-37D Shipped with 1 meter ACL-10137-1 cable Dimension: 112 x 77 x 52 mm3 (WxLxH) DIN-20P General purpose termination board for 20-pin ribbon flex cable DIN-20P Shipped with 1 meters ACL-10120-1 cable Dimension: 67 x 77 x 51 mm3 (WxLxH) Ordering Information DIN-100S Termination board with 100-pin SCSI-II con-nector with DIN socket DIN-502S DIN-37D Two pieces of termination board DIN-50S with cable Termination board with 37-pin D-type connector with DIN socket DIN-50S DIN-50P DIN-20P Termination board with 50-pin SCSI-II con-nector with DIN socket Termination board with 50-pin ribbon connector with DIN socket Termination board with 20-pin ribbon connector with DIN socket 3D-3 DIN-24R/TB-24R Termination Board With 24 Relay Outputs Features Termination Boards 24 single-pole, double-throw (SPDT form C) relays 50-pin Opto-22TM compatible connector 220VDC/250VAC maximum switching voltage 2A DC, AC maximum switching current On-board relay driver circuitry LEDs indicate relay status Screw terminals for easy field wiring DIN-24R with DIN socket is available for easily mounting 50-pin SCSI-type connector is available for interface with ND-6058 TB-24R Introduction The DIN-24R and TB-24R relay output boards are designed for industrial control applications. It contains 24 electro-mechanical SPDT relays that can be driven by the 24-bit digital output ports of the PCI-7248, PCI-7296,ACL-7122, ACL-7124 and PET-48DIO, ND-6058. Each relay's switching capacity is 60W/120V. The normally open, normally closed, and common contacts for each relay are made available for maximum flexibility. Specifications 24 Matsushita DS-Relays Indication display: 24 LEDs Indication mode: * logic "1": LED on, relay set * logic "0": LED off, relay reset Relay form: Single Pole, Double Throw (SPDT) Input terms: Normally open or normally closed Relay coil: Relay model Nominal voltage Min. set and reset voltage Max. allowable voltage Coil resistance 3D-4 DIN-24R 12V Version DS1E-S-DC1 2V 12VDC 9.6VDC 24V Version DS1E-S-DC2 4V 24VDC 19.2VDC 19.2VDC 38.4VDC 1600 6400 Power consumption: * TB-24R: +5V @ 40mA for each relay is ON * DIN-24R: * +5V @ 200mA max. * +12V @ 33mA for each relay * 530 mA for all relays on. Operating temperature: 0~ 60C Storage temperature: -20~ 80C Operating humidity: 5 ~ 95%, noncondensing Dimensions: * TB-24R: 220 mm x 132 mm * DIN-24R: 205 mm x 114 mm Matsushita DS-Relay High sensitivity, high switching power UL/CSA recognized Contact material: Gold-clad silver Rating (resistive): * Max. switching power: 60W, 125VA * Max. switching voltage: 220VDC, 250VAC * Max. switching current: 2A DC, AC * Max. carrying current: 3A DC, AC UL/CSA rating: * 6A 125V AC * 6A 10V DC * 2A 30V DC Expected life (min. operations): * Mechanical: 108 * Electrical 2A 30V DC resistive: 5 x 105 * Electrical 1A 30V DC resistive: 2 x 106 Coil (polarized): * Min. set and reset power: 45mW * Normal set and reset power: Approx. 90mW Max. operating speed: 20cpm at rated load Operating time (at nominal voltage): 3 ms typical. 10ms max.. Release time (at nominal voltage): 2 ms typical. 5ms max.. Set time (latching): Approx. 3msec. Initial breakdown voltage: * Between open contacts: 500 Vrms * Between contact and coil: 1,000 Vrms Initial insulation resistance: Min. 1,000M Ordering Information TB-24R/12 Termination Board with 24 Relay Outputs and 12 Volt Coil (includes one 1.5meters, 50-pin flat cable) TB-24R/24 Termination Board with 24 Relay Outputs and 24 Volt Coil (includes one 1.5meters, 50-pin flat cable) DIN-24R/24, DIN-24R/12 Termination Board of 24 Relay Outputs and 24 or 12 Volt Coil with DIN Socket DIN-24P/TB-24P Termination Board with 24 Opto-isolated Digital Inputs Features 24 opto-isolated digital input channels 50-pin Opto-22TM compatible connector 50-pin SCSI-type connector available on DIN-24R to interface with ND-6058 AC or DC polarity-free input, isolated or dry-contact (without isolation) by jumper selection Thresholds from 3VDC to 24VDC, adjustable by changing current-limiting resistors 2500Vrms optical isolation LEDs indicate input channel status Jumper selectable for voltage input mode or dry contact input mode Screw terminal for easy field wiring DIN-24P Introduction The DIN-24P and TB-24P digital input termination boards feature high-voltage optoisolation on all input channels. They provides 24 channels that are accessed through a single 50-pin connector, standard on the NuDAQ digital I/O boards, such as ACL-7122, ACL7124, PET-48DIO, and PCI-7248, PCI-7296 and ND-6058. Each opto-isolated digital input accepts from 3VDC to 24VDC or 6.3mA to 50mA by changing a current limiting resistor for logic high. In addition, opto-isolated inputs provide isolation between separate channels and between each input channel of your PC system. Isolation prevents floating potential and ground loop problems from damaging the PC. Specifications Response time: * 20 ms without AC filter * 2.2 ms with AC filter Dry contact input: * Internal pull-up voltage supply : +5VDC * Logic "1": Input Closed * Logic "0": Input Open Indication display: 24 LEDs * Logic "1": LED on * Logic "0": LED off Power requirement: +5V@40mA (max.) Operating temperature: 0~ 60C Storage temperature: -20~ 80C Operating humidity: 5 ~ 95%, non-condensing Dimension: * TB-24P: 220 mm x 132 mm * DIN-24P: 205 mm x 114 mm Pin Assignments for 50-pin connector of TB-24P Termination Boards TB-24P General Information Numbers of channel: 24 Opto-isolator: 4N35 Input impedance: 1.2K Ohms or 4.7K Ohms for 24V input version Isolation voltage: 2500VDC or Peak AC Input mode: Isolation or dry contact (non-isolation) Input electrical characteristics: * Logic "Low": 0.8V max. * Logic "High": 3VDC to +24VDC * Logic input high current: 6.3mA to 50mA Ordering Information TB-24P 24-CH Isolation/Dry contact termination board (includes one 1.5 meter 50-pin flat cable) DIN-24P 24-CH Isolation/Dry contact termination board with DIN socket (include 1 m cable ACL-10250-1) DIN-24/P24, TB-24P/24 24V input version of DIN-24P & TB-24P 3D-5 TB-16P8R Termination Board with 16-CH-Isolated DI & 8-CH Relay Features 16 isolated digital input and 8 SPDT form-C relay output 2500V rms isolation voltage Maximum 220V DC / 250 V AC switching voltage, 2A DC switching current LEDs indicated relay and input status 50-pin male mating connector Screw terminal for easily filed wiring Specifications Termination Boards Number of isolated DI channels: 16 Electronics characteristics of isolated DI: refer to the TB-24P's specifications Number of relay output channels: 8 Electronics characteristics of relay: refer to the TB-24R's specifications Power requirements: Ordering Information * +5V@ 40mA (max.) * +12V@ 100mA (max.) Operating temperature: 0 ~ 60C Storage temperature: -20~ 80C Operating humility: 5~95%, non-condensing Dimensions: 220 mm x 132 mm TB-24 TB-16P8R/12 Termination Board with 16 Opto-isolated inputs & 8 relay outputs and 12 volt relay coils. (includes one 1.5 meter 50-pin flat cable) TB-16P8R/24 24V relay coil version General Purpose Termination Board for DB-37 and Opto-22 Connectors Connects easily to all 50-pin mating connector or 37-pin D type connector system boards Breadboard area for customer design 37-pin male D type connector: 2 50-pin male mating connector: 2 Breadboard area: 125 mm x 73 mm Ordering Information TB-24 General Purpose Termination Board (Includes one 1.5 meter 50-pin flat cable) DIN-24G Supports any standard or miniature G5 size modules Termination board for installing Grayhill I/O modules At most 24 modules can be installed Every 8 channels form a group of input or output channels Ordering Information DIN-24G 24-CH Grayhill I/O module Termination Board with DIN socket 3D-6 Termination Board for 24-CH Grayhill I/O Modules ACLD Screw Terminal Boards Features General Low cost universal screw terminal board Blank pads accommodate applications such as break detection, low-pass filter, current shunt and voltage attenuator on ACLD-9178, 9188, 9138 Table-top mounting using nylon standoffs ACLD-9178 ACLD-9178 Termination Boards 40 terminal points for two 20-pin connectors Reliable screw clamp terminal blocks Dimension: 102 mm x 114 mm ACLD-9188 ACLD-9188 40 terminal points for two 20-pin flat cable connectors or one DB-37 connectors Reliable screw clamp terminal blocks ACLD-9138 ACLD-9138 One 37-pin DB-37 connector Blank RC circuits for analog input boards Reliable screw clamp terminal blocks ACLD-9137 / ACLD-9137F ACLD-9137 is with 37-pin DB-37 male connector, ACLD- 9137F is with female connector Reliable screw clamp terminal blocks ACLD-9137 Ordering Information ACLD-9178 Screw Termination Board for Two 20-pin Headers(Includes two 20-pin flat cable ACL10120-1) ACLD-9188 Industrial Termination Board ACLD-9138 Screw Termination Board for DB-37 Connector (Includes 1meter cable ACL-10237-1) ACLD-9137F Screw termination board with female DB-37 Connector ACLD-9137 Screw termination board with male DB-37 Connector Selection Guide of the 20-pin Header ACLD Termination Board PCI/ISA Cards Accessories ACL-8111/8112/8216/8316/6126/7120 PCI-9111/9112 ACL-10120-1/-2 ACL-10220-1/-2 ACLD-9182A/9185/9178/9188 3D-7 ACLD-9182A Termination Board with 16-Channel Opto-Isolated Digital Inputs Features 16 Opto-Isolated digital input channels For use with 20-pin digital input connector of NuDAQ cards AC or DC polarity-free digital input On-board LEDs reflect the input logic status Screw terminals for easy field wiring Isolation and dry contact Specifications Termination Boards Number of channels: 16 Opto-isolator: 4N35 Input impedence: 1.2K Ohms Input voltage range: 0~24VDC Threshold voltage: 1.5VDC Isolation voltage: 1,000 Vdc channel-tochannel and channel-to-ground Input mode: Isolation and Dry Contact Input Range Ordering Information Response time: 20msec without AC filter 2.2m sec with AC filter Connector: 20-Pin flat ribbon cable connector Screw terminal: #22 to #12 AWG wires Dimension: 205 mm x 114 mm Operating temp.: 0~ 60C Storage temp.: -20~ 80C Humidity: 5~95%, non-condensing ACLD-9185 ACLD-9182A 16 Channel Isolation/Non-Isolation DI Terminal Board(includes 1m 20-pin flat cable ACL10120-1) 16-Channel Output Termination Board Features 16 Single-Pole-Double-Throw (SPDT Form C) Relays For use with 20-pin digital input connector of NuDAQ cards LED Indicators to show relay status On-board relay driver circuitry Screw terminals for easy field wiring Specifications Number of channels: 16 Relay type: SPDT (Form C) Contact rating: * AC 120V/0.5A Resistive * DC 30V/1A Resistive Breakdown voltage:500VAC 1 min. DC/Peak AC min. Relay ON time: 6 msec typical Relay OFF time: 3 msec typical Control logic: Input TTL High (5V) relay on 3D-8 Ordering Information Insulation resistance: 100M Ohms Life expectancy: > 5 million operations at full load Dimension: 205mm x 114cm Operating temp.: 0~ 60C Storage temp.: -20~ 80C Humidity: 5~95%, non-condensing Power consumption: * +12V:33mA for each relay * 528 mA for all relays on * +5V: 200mA maximun ACLD-9185 16 Channel Relay Output Terminal Board (includes 1m 20-pin flat cable ACL-10120-1) ACLD-8125 Termination Board with Cold-Junction Temperature Sensor Features Low cost universal screw terminal board Blank pads accommodate applications such as break detection, low-pass filter, current shunt and voltage attenuator Table-top mounting using nylon standoffs One DB-37 connector for multi-function DAQ boards Reliable screw clamp terminal blocks Specifications * Pin10..17: Single-ended voltage input channel 8~15 or differential input channel 0~7 * Analog ground screw terminal for every analog input channels * Screw terminal for two analog output and their reference voltage * Screw terminal for counter input, output and gate signals ACLD-9881 * Screw terminal for +5V and external A/D trigger Dimension: 168 mm x 114 mm Ordering Information ACLD-8125 Termination Board with cold-junction temperature sensor Termination Boards Cold-junction temperature sensor * LM334 & LM335 generate voltage proportional to temperature, * Jumper selectable SE or DI output * Output to analog input channels #0 * Power from DB-37 Pin-13: +12V * Calibrated by VR DB-37 Connector * Pin1..8: Single-ended voltage input channel 0~7 Termination Board of General Purpose 32-CH Signal Conditioning Features Low cost universal screw terminal board Table-top mounting using nylon standoffs Pin definition for 32-CH analog input board such as ACL-8113 and PCI-9113A. Blank RC-filter pads accommodate applications such as break detection, low-pass filter, current shunt and voltage attenuator Industrial type terminal blocks permit heavy-duty and reliable connection of signals One 37-pin connector Specifications Number of screw terminals: 40 * 32-Screw terminal for AI signal * 8 Screw terminal for GND Number of RC-filter pads: 32 Dimension: 221mm x 105cm Ordering Information Connector: DB-37 Pin definition: The same as ACL-8113 and PCI-9113A Pin 9,10,28,29 are grounding pins. ACLD-9881 Terminal board for general purpose 32-CH signal conditioning 3D-9 Accesories ACL-10120-1/-2 ACL-10220-1/-2 ACL-10232 20-pin Flat Cable, 1M/2M 20-pin Shielded & Grounded Cable, 1M/2M DB-9 RS-232 male-female Cable, 5M Termination Boards ACL-10137-1/-2 ACL-10137-1 MF ACL-10237-1 DB-37 Cable, 1M/2M, (male-male) DB-37 1M male/female Cable(for ACLD-9137) DB-37 Flat Cable, 1M ACL-10337 Two 20-pin header to DB-37 PC back panel ACL-10250: 50-pin SCSI-II Cable ACL-102100: 100-pin SCSI-II Cable 3D-10 ACL-10437 40-pin Header to DB-37 PC back panel (for ACL-7225, PCI-7200) ACL-10150-1.5 50-pin Flat Cable, 1.5M ACL-10252 ACL-10450 100-pin to 2x50-pin Cable (for DIN-502S) 50-pin Header to SCSI-II with PC back Panel ACL-10537 ACL-10550 ACL-105100 DB-37 Assembly 50-pin SCSI-II Assembly 100-pin SCSI-II Assembly Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ADLINK Technology: ACL-10120-2 ACL-10120-1