DIN-32CSBCES70305-HM - 3M Electronic Solutions Division

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ DIN C-Form Socket

Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series

• Multi-pin count socket compatible with VME,

Multibus II, and VXI backpanels

• Expanded pin counts

• Optional press-t or solder tail termination

• Mates with C-form and R-form plugs

• Optional retention clip

• See the Regulatory Information Appendix (RIA) in

the “RoHS compliance” section of

www.3M.com/Interconnects for compliance

information (RIA E1 & C1 apply)

Date Modied: February 2, 2010 TS-2306-E

Sheet 1 of 3

Physical

Insulation:

Material: Glass Filled Polyester (PBT)

Flammability: UL 94V-0

Color: Gray

Contact:

Material: Copper Alloy

Plating:

Underplating: 50 μ” Min.Nickel

Wiping Area: See Ordering Information

Termination: See Ordering Information

Electrical

Current Rating: 3.0A at 30°C T-rise above Ambient

Contact Resistance: ≤20 mΩ

Insulation Resistance: ≥1,000 MΩ,100VDC

Withstanding Voltage: 1,000 V

AC for 1 minute

Environmental

Temperature Rating: -55°C to 125°C

Process Temperature Rating: Maximum Insulator Temperature 191°C (solder wave process only)

UL File No.: E68080

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ DIN C-Form Socket

Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series

TS-2306-E

Sheet 2 of 3

Table 1

Contact

Quantity Part Number A B D E

16 DIN-016CSA-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]

32 DIN-032CSB-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]

48 DIN-048CSC-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]

32 DIN-032CSD-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]

16 DIN-016CSE-XXX-XXXX 54.40 [2.142] 44.40 [1.748] 50.00 [1.969] 38.10 [1.500]

32 DIN-032CSA-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]

64 DIN-064CSB-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]

96 DIN-096CSC-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]

64 DIN-064CSD-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]

32 DIN-032CSE-XXX-XXXX 95.00 [3.740] 85.00 [3.346] 90.00 [3.543] 78.74 [3.100]

11.60

[.457]

8.50

[.335]

2.90

[.114]

1.00

[.039]

0.30

[.012]

2-Ø2.80

[Ø.110]MIN.

5.08

[.200]

10.50

[.413]

5.08

[.200]

2.54

[.100]

2.54

[.100]

PRESS-FIT TAILS SOLDER TAILS

POSITION A1

POSITION B1

POSITION C1

[inch]

Tolerance Unless Noted

X. .X .XX

mm ± 0.50 ± 0.25 ± 0.15

[ ] Dimension for Reference Only

3.80

(.150)

Electronic Solutions Division

Interconnect Solutions

http://www.3Mconnector.com

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ DIN C-Form Socket

Vertical, Solder Tail or Press-Fit Termination DIN 41612 Series

TS-2306-E

Sheet 3 of 3

Ordering Information

DIN - XXXCS X - XXX - XX

A = A Row only (see note)

B = Rows A & C Filled

C = Rows A, B & C Filled

D = Rows A & B Filled

E = B Row only (see note)

Termination Options:

SEE TABLE 2

Contact Quantity

SEE TABLE 1

RECOMMENDED PCB LAYOUT

Ø2.8-2.9

[.110-.114]

2.54

[.100]

5.08

[.200]

0.30

[.012]

Ø0.94-1.09

[.037-.043]

2.54

[.100]

PLATED THROUGH HOLE

Plating Options:

SH = 1 - 3 μ” Gold on Contact

120 - 200 μ” Matte Tin on Terminal

FJ = 10 - 20 μ” Gold on Contact

120 - 200 μ” Matte Tin on Terminal

KR = 30 - 40 μ” Gold on Contact

120 - 200 μ” Matte Tin on Terminal

HM = 3 μ” Gold on Contact, 7 μ” Min. PdNi

120 - 200 μ” Matte Tin on Terminal

KV = 30 μ” Gold on contact area, 1 - 3 μ” Gold

on Board Termination

Table 2

SOLDER TERMINATION OPTION NO. DIM “C” mm (in) Comments

R1L 3.75 (.148) with Retention Clips

R3L 2.29 (.090) with Retention Clips

S1L 3.75 (.148) no Retention Clips

S3L 2.29 (.090) no Retention Clips

W 14.70 (.579) no Retention Clips

PRESS-FIT TERMINATION OPTION NO.

PS 5.99 (.236)

PSL 4.25 (.167)

PW1 12.90 (.508)

Note: A and E options are not currently covered in UL File No. E68080

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness

is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated

with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order

shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the

warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of

the legal theory asserted.

Please recycle. Printed in USA.

RIA-2217B-E



3M Electronics Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

U.S.A.

1-800-225-5373

www.3Mconnector.com 3M is a trademark of 3M Company.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

3M:

DIN-120CSC-R1L-TG30 DIN-096CSC-S1L-HS DIN-016CSA-R1L-KR DIN-016CSE-R1L-KR DIN-032CSA-R1L-KR

DIN-032CSB-R1L-KR DIN-032CSD-R1L-KR DIN-032CSE-R1L-KR DIN-048CSC-R1L-FJ DIN-064CSD-R1L-KR DIN-

096CSC-W-KV DIN-032CSB-R1L-SH DIN-048CSC-R1L-SH DIN-096CSC-S1L-KV DIN-016CSA-R1L-FJ DIN-

016CSA-R1L-SH DIN-016CSE-R1L-FJ DIN-016CSE-R1L-SH DIN-032CSA-R1L-FJ DIN-032CSA-R1L-HM DIN-

032CSA-R1L-SH DIN-032CSB-R1L-FJ DIN-032CSD-R1L-FJ DIN-032CSD-R1L-SH DIN-032CSE-R1L-FJ DIN-

032CSE-R1L-HM DIN-032CSE-R1L-SH DIN-064CSB-R1L-FJ DIN-064CSB-R1L-SH DIN-064CSD-R1L-FJ DIN-

064CSD-R1L-HM DIN-064CSD-R1L-SH DIN-096CSC-R1L-FJ DIN-096CSC-R1L-SH DIN-120CSC-R1L-HS DIN-

120CSC-R1L-MH DIN-120CSC-S1L-HS DIN-32CSBCES70305-HM DIN-064CSB-R1L-KR DIN-048CSC-PSL-HM

DIN-096CSC-S1L-HM DIN-096CSC-S3L-HM DIN-064CSB-S1L-HM DIN-096CSC-PW1-HM DIN-096CSC-S1L-KR

DIN-096CSC-R1L-HM DIN-096CSC-PSL-HM DIN-016CSA-PS-FJ DIN-016CSA-PS-HM DIN-016CSA-PS-KR DIN-

016CSA-PSL-FJ DIN-016CSA-PSL-HM DIN-016CSA-PSL-KR DIN-016CSA-PSL-SH DIN-016CSA-PS-SH DIN-

016CSA-PW1-FJ DIN-016CSA-PW1-HM DIN-016CSA-PW1-KR DIN-016CSA-PW1-SH DIN-016CSA-R3L-FJ DIN-

016CSA-R3L-HM DIN-016CSA-R3L-KR DIN-016CSA-R3L-SH DIN-016CSA-S1L-FJ DIN-016CSA-S1L-HM DIN-

016CSA-S1L-KR DIN-016CSA-S1L-SH DIN-016CSA-S3L-FJ DIN-016CSA-S3L-HM DIN-016CSA-S3L-KR DIN-

016CSA-S3L-SH DIN-016CSA-W-FJ DIN-016CSA-W-HM DIN-016CSA-W-KR DIN-016CSA-W-SH DIN-016CSE-PS-

FJ DIN-016CSE-PS-HM DIN-016CSE-PS-KR DIN-016CSE-PSL-FJ DIN-016CSE-PSL-HM DIN-016CSE-PSL-KR

DIN-016CSE-PSL-SH DIN-016CSE-PS-SH DIN-016CSE-PW1-FJ DIN-016CSE-PW1-HM DIN-016CSE-PW1-KR

DIN-016CSE-PW1-SH DIN-016CSE-R3L-FJ DIN-016CSE-R3L-HM DIN-016CSE-R3L-KR DIN-016CSE-R3L-SH DIN-

016CSE-S1L-FJ DIN-016CSE-S1L-HM DIN-016CSE-S1L-KR DIN-016CSE-S1L-SH DIN-016CSE-S3L-FJ DIN-

016CSE-S3L-HM DIN-016CSE-S3L-KR DIN-016CSE-S3L-SH DIN-016CSE-W-FJ