Standard DC Input Modules Features Rugged construction Up to 4000 volts of optical isolation (transient) Most have a bridge-rectifier input, and accept AC or DC inputs. IDC5 Input Module Input modules are used for sensing ON/OFF voltage levels. All AC and DC input modules, with the exception of the IDC5B and the IDC5D, have a bridge-rectifier input, and accept AC or DC inputs. The IDC5B module is a fast-switching input module for signals produced by photoelectric switches or TTL level devices. The IDC5D is a low cost, DC only, input module for use in data acquisition applications. Each module provides up to 4000 volts (transient) of optical isolation between the field inputs and the output side of the circuit. Typical uses and applications include sensing the presence or absence of voltage or sensing contact closures from sources such as: * Proximity switches * Limit switches * Selector switches * Push buttons * Photoelectric switches * TTL-compatible devices Standard DC Input Modules Description Part Numbers Part Description IDC5 AC/DC Input 10-32, 5 VDC Logic IDC5B DC Input 4-16, 5 VDC Logic High Speed IDC5D DC Input 2.5-28 VDC, 5 VDC Logic IDC5G AC/DC Input 35-60 VDC, 5 VDC Logic IAC5 AC/DC Input 90-140 VAC, 5 VDC Logic IAC5A AC/DC Input 180-280 VAC, 5 VDC Logic AC/DC Input 90-140 VAC, 15 VDC Logic IAC15A AC/DC Input 180-280 VAC, 15 VDC Logic IDC24 AC/DC Input 10-32 VDC, 24 VDC Logic IAC24 AC/DC Input 90-140 VAC, 24 VDC Logic IAC24A AC/DC Input 180-280 VAC, 24 VDC Logic Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET AC/DC Input 10-32 VAC, 15 VDC Logic IAC15 Form 0451-120920 IDC15 PAGE 1 Standard DC Input Modules Module Specifications Standard DC Input Modules General Operating Ambient Temperature - 30 to 70 C Isolation, Input-to-Output (Transient) 4000 V Output Voltage Drop: logic side 0.4 volts @ 50 mA Output Current 50 mA Output Leakage With No Input IDC5D Only 0.1 mA @ 30 VDC 0.01 mA @ 30 VDC Transistor 30 volts breakdown Input Module Specifications Unit IDC15* IDC24* VDC 10-32 4-16 2.5-28 35-60 10-32 10-32 VAC 12-32 4-16 -- 35-60 12-32 12-32 mA 25 45 30 6 25 25 Turn-on Time msec 5 0.05 1 10 5 5 Turn-off Time msec 5 0.1 1.5 10 5 5 mA 1 0.7 0.2 0.7 1 1 Input Voltage Range Input Current @ Max Line Input Allowed for No Output IDC5 IDC5B IDC5D IDC5G Volts 3 1 1 7 3 3 Output Supply Voltage-Nominal VDC 5 5 5 5 15 24 Output Supply Voltage-Range VDC 4.5-6 4.5-6 4.5-6 4.5-6 12-18 20-30 mA 12 12 12 12 15 18 Input Resistance Ohms 1.5k 300 900 10k 1.5k 1.5k Control Resistance (Rc in schematic diagram) Ohms 220 220 470 220 1k 2.2k IAC15 IAC24 IAC5A IAC15A* IAC24A* Output Supply Current @ Nominal Logic Voltage * Not for use with Opto 22 brains. Unit Input Voltage Range Input Current @ Max Line Form 0451-120920 90-140 90-140 180-280 180-280 180-280 VAC 90-140 90-140 90-140 180-280 180-280 180-280 mA 5 5 5 5 5 5 msec 20 20 20 20 20 20 Turn-off Time msec 20 20 20 20 20 20 mA 3 3 3 1 1 1 Volts 45 45 45 45 45 45 Output Supply Voltage-Nominal VDC 5 15 24 5 15 24 Output Supply Voltage-Range VDC 4.5-6 12-18 20-30 4.5-6 12-18 20-30 mA 12 15 18 12 15 15 Input Resistance Ohms 28k 28k 28k 70k 70k 70k Control Resistance (Rc in schematic diagram) Ohms 220 1k 2.2k 220 1k 2.2k Output Supply Current @ Nominal Logic Voltage DATA SHEET 90-140 Turn-on Time Input Allowed for No Output PAGE 2 IAC5 VDC * Not for use with Opto 22 brains. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Standard DC Input Modules Dimensions Typical, All Models Standard DC Input Modules Schematic Form 0451-120920 DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 3 Standard DC Input Modules Connections Form 0451-120920 DATA SHEET Standard DC Input Modules Field Connection Diagram PAGE 4 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. More About Opto 22 Products Opto 22 develops and manufactures reliable, flexible, easy-touse hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications. OptoEMU Energy Management System The easy-to-use OptoEMU Sensor monitors electrical energy use in your facility and delivers detailed, real-time data you can see and analyze. The Sensor can monitor energy data from pulsing meters, electrical panels or subpanels, and equipment. View energy data online using a software service or incorporate the data into your control system for complete energy management. SNAP PAC System Designed to simplify the typically complex process of selecting and applying an automation system, the SNAP PAC System consists of four integrated components: * SNAP PAC controllers * PAC ProjectTM Software Suite * SNAP PAC brains * SNAP I/OTM SNAP PAC Controllers Programmable automation controllers (PACs) are multifunctional, modular controllers based on open standards. Opto 22 has been manufacturing PACs for over two decades. The standalone SNAP PAC S-series and the rack-mounted SNAP PAC R-series both handle a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system easily, without the expense and limitations of proprietary networks and protocols. PAC Project Software Suite Opto 22's PAC Project Software Suite provides full-featured, cost-effective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Control programming includes both easy-to-learn flowcharts and optional scripting. Commands are in plain English; variables and I/O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, www.opto22.com. PAC Project Professional, available for separate purchase, adds OptoOPCServer, OptoDataLink, options for controller redundancy or segmented networking, and support for legacy Opto 22 serial misticTM I/O units. SNAP PAC Brains While SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller). Quality Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Because we do no statistical testing and each part is tested twice before leaving our factory, we can guarantee most solid-state relays and optically isolated I/O modules for life. Free Product Support Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Additional support is always available on our website: how-to videos, OptoKnowledgeBase, self-training guide, troubleshooting and user's guides, and OptoForums. In addition, hands-on training is available for free at our Temecula, California headquarters, and you can register online. Purchasing Opto 22 Products Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-3216786 or 951-695-3000, or visit our website at www.opto22.com. www.opto22.com www.opto22.com * Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * Form 1335-110907 SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2012 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.