SURFACE MOUNT DISPLAY ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: ACSC08-51ZGWA Green Features Description z 0.8 inch digit height. The Green source color devices are made with InGaN z Low current operation. on Sapphire Light Emitting Diode. z Excellent character appearance. Static electricity and surge damage the LEDS. z Mechanically rugged. It is recommended to use a wrist band or anti-electrostatic z Gray face,white segment. glove when handling the LEDs. z Package: 200pcs/ reel All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 2a. grounded. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAK0393 REV NO: V.4B DATE: APR/11/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000650 Selection Guide Part No. Dice ACSC08-51ZGWA Lens Type Green (InGaN) White Diffused Iv (ucd) [1] @ 10mA Min. Typ. 52000 100000 Description Common Cathode, Rt. Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. 2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK0393 REV NO: V.4B DATE: APR/11/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000650 Green ACSC08-51ZGWA SPEC NO: DSAK0393 REV NO: V.4B DATE: APR/11/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000650 ACSC08-51ZGWA Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAK0393 REV NO: V.4B DATE: APR/11/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000650 PACKING & LABEL SPECIFICATIONS ACSC08-51ZGWA All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAK0393 REV NO: V.4B DATE: APR/11/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.Liu ERP: 1351000650 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: ACSC08-51ZGWA