10 Special Devices Snap Plugs D ile AL Co MATERIAL: COPPER ~_ Lo | j-_-L __.| THICKNESS: .032 Max. (0,8) Basic Dimensions KRIMPTITE INSULKRIMP AVIKRIMP AVIKRIMP (PVC INSULATION) (NYLON INSULATION) (NYLON INSULATION) 140 (3,6) | .175 (4,4) .140 (3,6) | .170 (4,3) .140 (3.6) | .170 (4,3) AWG Barrel Max. Wire | Max.Wire Max. Max. Wire | Max. Wire Max. Max. Wire | Max. Wire Max. Wire Length Diameter Part Length Insulation | Insulation Length Insulation | Insulation Length Insulation Insulation Length Range B D Number L Diameter Diameter L Diameter Diameter L Diameter Diameter L Part # Part # Part # Part # Part # Part # 22-18 254 180 A159 754 A-259X 950 (24,1) A-559 948 (24,1) A-859 957 (24,3) (0.3-1.0) 22-18 254 188 A-169 B94 A-269X 890 (22,6) A-569 888 (22,6) A-869 897 (22,8) (0.3-1.0) 16-14 (1.2-2.0) 254 180 B-179 754 B-279X 950 (24,1) B-579 948 (24.1) B-879 957 (24,3) iS 4) 254 156 B-189 894 B-289X 890 (22,6) B-89 888 (22,6) B-889 897 (22,8) Note: For Terminals on Mylar Tape, add T at the end of loose piece part number. For open barrel strip products please consult factory. |~ B-| TAL $ -f D \ | MATERIAL: BRASS KRIMPTITE INSULKRIMP AVIKRIMP (PVC INSULATION) (PVC INSULATION) Snap Barrel Max. Barrel Max. Wire Max. Barrel Max. Wire Max. Wire Plug Part Length Length Part Length Insulation Length Part Length Insulation Length Range Diameter Number B L Number B Diameter L Number B Diameter L 22-18 186 (3.9) AA-1121 .20 (5,1) 64 (16,2) | BRA-2156 420 (10,6) | .140(3.5} | 1.010 (25.6) BRA-8156 420 (10,6) 125 (3,2) | 1.010 (25,6) (0.3-1.0) 16-14 186 (3.9} BB-1122 20 (5,1) 64 (16,2) | BRB-2156 420 (10,6) | .170(4.3} | 1.010 (25,6) BRB-8156 420 (10,6) 150 (3,8) | 1.010 (25,6) (1.2:2.0) 22-18 180 (4.6} AA-1120 20 (5,1) 70 (17,8) | BRA-2180 420 (10,6) | .140 (3.5) | 1.010 (25.6) BRA-8180 420 (10,6) 125 (3.2) | 1.010 (25,6) (0.3-1.0) 16-14 180 (4.6) BB-1123 20 (5,1) .70 (17,8) | BRB-2180 420 (10,6) | .170 (4.3) | 1.010 (25.6) BAB-8180 420 (10,6) 150 (3.8) } 1.010 (25,6) (1.2-2.0) Note: For nylon insulated part, add N fo the end of the loose piece part number. For Terminals on Mylar Tape, add T at the end of loose piece part number. For open barrel strip products please consult factory. Splash Proof Snap Plug and Receptacle Insulators * Seals Snap Plug and Snap Plug Receptacle Terminals from moisture, condensation and contamination. *Provides insulation protection along with easy inspection of terminais. *Fits most 22AWG through 14AWG wire Part number: Flag Terminals - Ring and Spade The barrel of a flag terminal is at right angles to the tongue, rather than being in line. Therefore, a flag terminal fits on its wire like a flag on a flagpole. Male | nsulator SPP-1 Female Insulator SPR-1 |. C~ " MATERIAL: COPPER + rT -| i. Basic Dimensions KRIMPTITE RING KRIMPTITE SPADE Wire Stud Maximum Min. Part Part Range Size Width Clearance Number Length Number Length AWG/mm? S Ww L L L 22-16 5-6 (3-:3,5) 380 (9,7) 318 (8,1) A-142-06 638 (16.1) - 652 (16,6) (0.3-1.2) 8 (4) 380 (9,7) 318 (8,1) A-142-08 635 (16.1) = 652 (16,8) 10} 380 (9,7) 318 (8,1) A-142-10 635 (16,1) = 652 (16,6) 16-14 5-6 (3-3,5) 380 (9,7) 318 (8,1) B-143-06 666 (16,9) B-148-06 666 (16,9) (1.22.0) 8 (4) 380 (9,7) 318 (8,1) B-143-08 666 (16,9) B-148-08 666 (16,9) 10(-) 380 (9,7) 318 (8,1) B-143-10 B66 (18,9) B-148-10 666 (16,9) 12-10 5-6 (3-3,8) 380 (9,7) 318 (8,1) C-144-06 725 (18,4) C-149-06 718 (18,2) (3.0- 6.0) 8 (4) 380 (9,7) 318 (8,1) C-144-08 725 (18.4) C-149-08 718 (18,2) 10 (-) 380 (9,7) 318 (8,1) 6-14-10 725 (18.4) C-149-10 718 (18,2)