F1772-410-3200 - Vishay Presicion Group

Document Number: 26501 To contact us: RFI@vishay.com www.vishay.com

Revision: 11-Jun-07 25

F1772-3200

Vishay Roederstein

AC-Capacitors, Suppression Capacitors

Class X2 AC 300 V (MKT)

Dimensions in mm

MAXIMUM PULSE RISE TIME: (du/dt) in V/µs

RATED VOLTAGE:

AC 300 V, 50/60 Hz

PERMISSIBLE DC VOLTAGE:

DC 800 V

TERMINALS:

Radial tinned copper wire

COATING:

Plastic case, epoxy resin sealed, flame retardant UL 94V-0

CLIMATIC TESTING CLASS ACC. TO EN 60068-1:

40/100/56

CAPACITANCE RANGE:

E12 series 0.01 µFX2 - 2.2 µFX2

E12 values on request

FURTHER TECHNICAL DATA:

See page 21 (Document No 26504)

LEAD LENGTH

X (mm)

ORDERING CODE**

4-1 F1772-. . .-3204/3264

6-1 F1772-. . .-3200/3260

15-1 F1772-. . .-3215/3265

30+5 F1772-. . .-3230/3263

RATED

VOLTAGE

PITCH (mm)

15.0 22.5 27.5 37.5

AC 300 V 200 150 100 100

± 0.4

pcm ± 0.4 Ø 0.8

Dielectric

Electrode

Free margin

Center margin

FEATURES:

Product is completely lead (Pb)-free

Product is RoHS compliant

CAPACITANCE TOLERANCE:

Standard: ± 20 %

DISSIPATION FACTOR TANδ:

< 1 % measured at 1 kHz

INSULATION RESISTANCE: FOR C ≤ 0.33 µF:

30 GΩ average value

15 GΩ minimum value

TIME CONSTANT FOR C > 0.33 µF:

10 000 sec. average value

5000 sec. minimum value

TEST VOLTAGE:

(Electrode/electrode): DC 2150 V/2 sec.

REFERENCE STANDARDS:

EN 132 400, 1994

EN 60068-1

IEC 60384-14/2, 1993

UL 1283

UL 1414

CSA 22.2 No. 8-M 86

CSA 22.2 No. 1-M 90

DIELECTRIC:

Polyester film

ELECTRODES:

Metal evaporated

CONSTRUCTION:

Metallized film capacitor

Internal series connection

Between interconnected terminations and case (foil method):

AC 2500 V for 2 sec. at 25 °C.

Impedance (Z) as a function of frequency (f) at Ta = 20 °C

(average). Measurement with lead length 6 mm.

2.2 μF

1.5 μF

0.68 μF

0.33 μF

0.15 μF

0.068 μF0.047 μF

0.015 μF

0.01 μF

1 μF

0.47 μF

0.22 μF

0.1 μF

0.033 μF

0.022 μF

0.01 0.05 1.0 5.0 10 50 100

-1

-2

-3

0.1 0.5

Z [Ω]

f[MHz]

RoHS

COMPLIANT

Pb-free

www.vishay.com To contact us: RFI@vishay.com Document Number: 26501

26 Revision: 11-Jun-07

F1772-3200

Vishay Roederstein AC-Capacitors, Suppression Capacitors

Class X2 AC 300 V (MKT)

APPROVALS

Inbuilt discharging resistor on request (with larger case dimensions).

* Further information about packaging quantities with different lead length and/or taped versions.

See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference

** These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622).

The ordering code is: F1772-. . .-3290 at H = 16.5 mm

F1772-. . .-3291 at H = 18.5 mm

F1772-. . .-3960 at H = 16.5 mm

F1772-. . .-3961 at H = 18.5 mm

COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE APPROVAL MARK

U.S.A.

(for AC 250 V)

UL 1283

UL 1414

0.01 - 2.2 µFX

0.01 - 1.0 µFX

E 76297

E 100682

Canada

(for AC 250 V)

C 22.2 No. 8-M 1986

C 22.2 No. 1-M 1994

0.01 - 2.2 µFX

0.01 - 0.82 µFX

LR 64546

LR 64546-8

CB TEST-CERTIFICATE (for AC 300 V) 0.01 - 2.2 µFX2 DE 1-8791

Germany EN 132 400; 1999

IEC 60384-14, 2nd edition, 1995 0.01 - 2.2 µFX2 40005120

This approval mark together with the CB-Certificate replace all national approval marks of the following countries

(they have already signed the CB-Agreement):

Austria Belgium Denmark Finland Sweden

France Germany Ireland Italy Switzerland

Netherlands Israel Portugal Spain Great Britain

Japan Norway China Poland Czech. Republic

Singapore Rep. of Korea Hungary Iceland Slovenia

CAPACITANCE TOL.

(%)

PITCH

(mm)

BOX

NO.

DIMENSIONS

W x H x L (mm)

(+ 0.2/- 0.4 mm)

WEIGHT

LEAD LENGTH

6-1 mm

(g)

QUANTITY

PACKAGE

LEAD LENGTH

< = 6-1 mm

(pcs)*

ORDERING CODE**

0.01 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-310-32 . .

0.015 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-315-32 . .

0.022 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-322-32 . .

0.033 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.0 600 F1772-333-32 . .

0.047 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.1 600 F1772-347-32 . .

0.068 µFX2 ± 20 15.0 07 7.3 x 13.3 x 17.8 2.7 450 F1772-368-32 . .

0.1 µFX2 ± 20 15.0 08 8.3 x 14.3 x 17.8 4.1 325 F1772-410-32 . .

0.15 µFX2 ± 20 22.5 11 7.3 x 15.3 x 26.3 4.3 235 F1772-415-32 . .

0.15 µFX2 ± 20 15.0 35 10.3 x 17.3 x 17.8 4.3 225 F1772-415-326 .

0.22 µFX2 ± 20 22.5 12 8.3 x 16.3 x 26.3 6.8 200 F1772-422-32 . .

0.22 µFX2 ± 20 15.0 36 13.3 x 22.3 x 17.8 7.1 185 F1772-422-326 .

0.33 µFX2 ± 20 27.5 29 8.8 x 18.3 x 31.3 8.0 160 F1772-433-32 . .

0.33 µFX2 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.7 170 F1772-433-326 .

0.47 µFX2 ± 20 27.5 14 11.0 x 20.3 x 31.3 10.0 125 F1772-447-32 . .

0.47 µFX2 ± 20 22.5 27 12.3 x 19.8 x 26.3 8.7 125 F1772-447-326 .

0.68 µFX2 ± 20 27.5 15 13.0 x 23.3 x 31.3 14.2 110 F1772-468-32 . .

0.68 µFX2 ± 20 22.5 38 15.3 x 26.3 x 26.3 14.3 110 F1772-468-326 .

1.0 µFX2 ± 20 27.5 17 16.3 x 29.3 x 31.3 22.5 85 F1772-510-32 . .

1.0 µFX2 ± 20 22.5 20 17.8 x 29.3 x 26.3 18.3 90 F1772-510-326 .

1.5 µFX2 ± 20 37.5 70 15.5 x 28.3 x 41.3 26.1 70 F1772-515-32 . .

1.5 µFX2 ± 20 27.5 40 17.8 x 32.8 x 31.3 24.4 80 F1772-515-326 .

2.2 µFX2 ± 20 37.5 20 17.8 x 32.3 x 41.3 33.4 60 F1772-522-32 . .

F1772-3200

AC-Capacitors, Suppression Capacitors

Class X2 AC 300 V (MKT) Vishay Roederstein

Document Number: 26501 To contact us: RFI@vishay.com www.vishay.com

Revision: 11-Jun-07 27

APPLICATION NOTES

•For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of

300 V (AC).

•These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse

programs must be used.

•These capacitors can be used for series impedance application in case safety approvals are requested.

•The maximum ambient temperature must not exceed 100 °C.

•Rated voltage pulse slope:

If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V (DC)

and divided by the applied voltage.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.