D-subminiature Backshells - Two-Piece D*H Series * * * * * * * Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature plugs and sockets as well as HTD Series 1.5 D-subs. Ethernet hoods are available in diecast 15 position versions only with both 90 and 180 cable entry. Included in all backshells: - Hardware: 4-40 screws, hex nuts, 4-40 screw mounting bracket. - Grommets: To accommodate most cable sizes. Grommets also function as strain reliefs. Backshells are individually bagged. Note that slide locks may not be used with these backshells. Optional thumbscrew for backshell must be ordered separately if required. Materials * * * 4-40 screws, hex nuts, mounting bracket: Steel with zinc plating and clear chromate coating. Standard Backshells: - Plastic Backshells: ABS (black), hardware - steel with zinc plating, grommets - polyphenylene, (black). - Metallized Plastic Backshells: ABS with nickel over copper plating, hardware - steel with zinc plating, grommets - PVC (black). - Diecast Backshells: Diecast zinc, grommets - PVC (black). Ethernet Backshells: Diecast zinc, grommets - PVC (black). 4 Plastic Metallized Ethernet Straight Call Toll Free: 1 (800) 323-9612 Diecast Ethernet Right-Angle 4-82 D-subminiature Backshells - Two-Piece D*H Series Straight (180) Standard Backshells Plastic and Metallized Plastic Backshells Dimensions Shell Size E A B C D A in 1.225 1.540 2.090 2.730 2.645 B mm 31.12 39.12 53.09 69.34 67.18 in 1.547 1.516 1.655 1.830 1.855 mm 39.29 38.51 42.04 46.48 41.12 C in 0.640 0.640 0.710 0.906 0.940 D mm 16.26 16.26 18.03 23.01 23.88 4-83 in 0.645 0.645 0.645 0.645 0.750 mm 16.38 16.38 16.38 16.38 19.05 E in mm 0.400 10.16 0.400 10.16 0.522 13.26 0.725 18.42 0.725 18.42 F in 0.984 1.312 1.857 2.500 2.406 mm 24.99 33.32 47.17 63.50 61.11 Call Toll Free: 1 (800) 323-9612 4 D-subminiature Backshells - Two-Piece D*H Series EMI/RFI Shielded Diecast Backshells 4 Dimensions Shell Size in A mm in B mm C E A B C D 1.225 1.540 2.090 2.730 2.624 31.12 39.12 53.09 69.34 66.65 1.465 1.600 1.570 1.810 1.800 37.21 40.64 39.88 45.97 45.72 in 0.620 0.620 0.690 0.862 0.862 D E F mm in mm in mm in mm 15.75 15.75 17.53 21.89 21.89 0.620 0.620 0.620 0.620 0.730 15.75 15.75 15.75 15.75 18.54 0.400 0.400 0.525 0.725 0.725 10.16 10.16 13.34 18.42 18.42 0.984 1.312 1.857 2.500 2.406 24.99 33.32 47.17 63.50 61.11 Ordering Information D*H Two-Piece Backshells Fits Shell Standard Size Density Fits HTD 1.5 Density Cable Entry Style Plastic Cable Dia. (in) Metallized Plastic Cable Dia. (in) Diecast Metal Cable Dia. (in) E 9 15 Straight (180) DPH-E-001 .210-.320 DCH-E-001 .210-.350 DMH-E-001 .210-.320 A 15 26 Straight (180) DPH-A-001 .210-.320 DCH-A-001 .210-.350 DMH-A-001 .210-.320 B 25 44 Straight (180) DPH-B-001 .230-.450 DCH-B-001 .230-.450 DMH-B-001 .230-.450 C 37 62 Straight (180) DPH-C-001 .350-.650 DCH-C-001 .350-.640 DMH-C-001 .350-.650 D 50 N/A Straight (180) DPH-D-001 .350-.650 DCH-D-001 .350-.640 DMH-D-001 .350-.640 Call Toll Free: 1 (800) 323-9612 4-84 D-subminiature Backshells - Two-Piece D*H Series Straight (180) Diecast Ethernet Backshells Right-Angle (90) Diecast Ethernet Backshells 4 Ordering Information D*H Ethernet Diecast Backshells Fits Shell Size A A Fits Standard Cable Cable Entry Density Diameter (in) Style 15 .210-.320 Straight (180) DMH-A-001XL 15 .210-.320 Rt. Angle (90) DMH-A-901X A in mm 1.550 39.37 1.550 39.37 B in mm 1.880 47.75 1.880 47.75 C in mm 0.710 18.03 0.710 18.03 D in mm 0.64 16.26 0.64 16.26 E in mm 0.522 13.26 0.522 13.26 F in mm 1.312 33.32 1.312 33.32 THUMBSCREWS (OPTIONAL) FOR D*H BACKSHELLS Order #4-40-THMB-1 (two each required per backshell). (Will not work with ethernet type backshells) 4-85 Call Toll Free: 1 (800) 323-9612 MATERIALS D-subminiature Junction Shells Shell Material: Zinc-plated low carbon steel with yellow chromate finish. Clamp: Zinc-plated steel with yellow chromate finish. Screw: Zinc-plated steel with yellow chromate finish. Stop Nut: Zinc-plated brass with yellow chromate finish. Straight Clamp E Shell Size A B C D A Positions in 15 1.531 25 2.078 37 2.718 50 2.625 B mm 38.89 52.78 69.04 66.68 in .500 .500 .500 .609 mm 38.89 52.78 in .500 .500 mm 30.56 38.89 52.78 69.04 66.68 in 0.718 0.718 0.968 1.187 1.250 C mm 12.70 12.70 12.70 15.47 in 1.312 1.852 2.500 2.406 mm 12.70 12.70 in 1.312 1.852 mm 18.24 18.24 24.59 30.15 31.75 in .984 1.312 1.852 2.500 2.406 mm 33.32 47.04 63.50 61.11 E in .296 .296 .296 .390 mm 7.52 7.52 7.52 9.91 F in mm .312 7.92 .796 20.22 .687 17.45 .687 17.45 in .640 .640 .640 .703 G mm 10.31 15.06 E in mm .984 23.72 1.515 38.48 in .125 .187 mm 16.26 16.26 16.26 17.86 Round Clamp Shell Size A B A Positions in 15 1.531 25 2.078 B C mm 33.32 47.04 D in .406 .593 F mm 3.18 4.75 G in mm 1.031 26.19 1.062 26.97 Right-Angle Clamp Shell Size E A B C D A Positions in 9 1.203 15 1.531 25 2.078 37 2.718 50 2.625 B Call Toll Free: 1 (800) 323-9612 C mm 24.99 33.32 47.04 63.50 61.11 4-92 E in .437 .437 .437 .437 .562 F mm 11.10 11.10 11.10 11.10 14.27 in .437 .437 .625 .812 .906 G mm 11.10 11.10 15.88 20.62 23.01 in .468 .468 .468 .468 .531 H mm 11.89 11.89 11.89 11.89 13.49 in .281 .281 .281 .281 .343 mm 7.14 7.14 7.14 7.14 8.71 D-subminiature Junction Shells Deep Straight Clamp F .015 Shell Size E A B C D A Positions 9 15 25 37 50 in 1.203 1.531 2.078 2.718 2.625 B mm 30.56 38.89 52.78 69.04 66.68 in .484 .484 .484 .484 .593 mm 12.29 12.29 12.29 12.29 15.06 C in 0.984 1.312 1.852 2.500 2.406 mm 24.99 33.32 47.04 63.50 61.11 in .578 .578 .578 .578 .687 D mm 14.68 14.68 14.68 14.68 17.45 E in .375 .713 1.000 1.375 1.406 mm 9.53 18.11 25.40 34.93 35.71 F in .375 .312 .312 .312 .406 G mm 9.53 7.92 7.92 7.92 10.31 in .750 .750 1.000 1.000 1.125 H mm 19.05 19.05 25.40 25.40 28.58 in 1.219 1.250 1.531 1.531 1.656 mm 30.96 31.75 38.89 38.89 42.06 Switching Shell Shell Size A B C D A Positions 15 25 37 50 in 1.531 2.078 2.718 2.625 mm 38.89 52.78 69.04 66.68 B in .500 .500 .500 .609 C mm 12.70 12.70 12.70 15.47 in 1.312 1.852 2.500 2.406 mm 33.32 47.04 63.50 61.11 Ordering Information Junction Shells - Metal Shell Size E A B C D Fits Standard Density 9 15 25 37 50 Straight Clamp N/A DA-19678-1 DB-19678-2 DC-19678-3 DD-19678-4 Round Clamp N/A DA-20961 DB-20962 N/A N/A Right-Angle Clamp DE-19977-5 DA-19977-1 DB-19977-2 DC-19977-3 DD-19977-4 4-93 Deep Straight Clamp DE-24657 DA-24658 DB-24659 DC-24660 DD-24661 Switching Shell N/A DA-19678-6 DB-19678-7 DC-19678-8 DD-19678-9 Call Toll Free: 1 (800) 323-9612 D-subminiature Plastic Hoods Phenolic Hood Shell Material: Phenolic (black). #4-40 Screws: Steel with nickel plating. Shell Size A B A Positions in 15 1.297 25 1.406 B mm 32.94 35.71 in 1.219 1.797 C mm 30.96 45.64 in .266 .328 D mm 6.76 8.33 in 1.312 1.852 mm 33.32 47.04 E in mm 1.641 41.68 2.203 55.96 All-Plastic Straight (180) Hood Shell Material: Nylon (gray). #4-40 Screws: Steel with nickel plating. Connector Not Included Shell Size E A B A Positions in 9 1.218 15 1.546 25 2.093 B mm 30.94 38.27 53.16 in 1.000 1.000 1.250 C mm 25.40 25.40 31.75 in .984 1.312 1.852 D mm 23.72 33.32 47.04 in .500 .500 .500 mm 12.70 12.70 12.70 E in mm .562 14.27 .562 14.27 .562 14.27 in .281 .360 .493 F E in mm .562 14.28 .562 14.28 in .360 .360 mm 7.14 9.14 12.52 All-Plastic Right-Angle (90) Hood Shell Material: Nylon (gray). #4-40 Screws: Steel with nickel plating. Connector Not Included Shell Size A B A Positions in 15 1.822 25 2.368 B mm 46.28 60.15 in 1.000 1.250 C mm 25.40 31.75 in 1.312 1.852 D mm 33.32 47.04 in .500 .500 Ordering Information Plastic Hoods Shell Size E A B C D Standard Density 9 15 25 37 50 Phenolic Hood N/A DA-51225-1 DB-51226-1A N/A N/A Call Toll Free: 1 (800) 323-9612 Straight Hood DE-51218-1 DA-51210-1 DB-51212-1 N/A N/A Right Angle N/A DA-51211-1 DB-51213-1 N/A N/A 4-94 mm 12.70 12.70 F mm 9.14 9.14 in .218 .360 .360 G mm 7.14 9.14 9.14 D-subminiature Accessories Dust Caps * * * For use with all Cinch D-subminiature connectors. Used to protect connector contacts when connector is not mated. Made of polyethylene (black). Ordering Information Fits Shell Size E E A A B B C C D D Fits Standard Density Catalog No. Description 9 DE-59-20 Socket 9 DE-60-20 Plug 15 DA-59-20 Socket 15 DA-60-20 Plug 25 DB-59-20 Socket 25 DB-60-20 Plug 37 DC-59-20 Socket 37 DC-60-20 Plug 50 DD-59-20 Socket 50 DD-60-20 Plug A in .694 .749 1.022 1.077 1.562 1.635 2.210 2.283 2.116 2.179 B mm 17.63 19.02 25.95 27.36 39.67 41.52 56.13 57.99 53.75 55.35 in .627 .682 .955 1.010 1.495 1.568 2.143 2.216 2.049 2.112 C mm 15.93 17.32 24.25 25.65 37.97 39.83 54.43 56.29 52.04 53.64 in .362 .412 .362 .412 .362 .430 .362 .430 .474 .536 D in mm .295 7.49 .345 8.76 .295 7.49 .345 8.76 .295 7.49 .363 9.22 .295 7.49 .363 9.22 .407 10.34 .469 11.91 mm 9.19 10.46 9.19 10.46 9.19 10.92 9.19 10.92 12.04 13.61 Guide Pin Plates * Aligns connectors before actual mating. Generally used in blind mate applications. * * * * Male or female guide plates will accommodate Cinch male or female connectors. Plate: Cold-rolled steel with cadmium plating and yellow chromate finish. Guide pin (male): Stainless steel, passivated. Screws, rivets (male plate), washers (male plate): Steel with cadmium plating and yellow chromate finish. Socket Plug Ordering Information Fits Shell Standard Size Density A Plug Socket N/A N/A in mm in B mm C in D mm in F mm in mm in G mm K in mm E 9 A 15 DA-22213 DA-22214 2.281 57.93 1.000 25.40 1.312 33.32 .750 19.05 .898 22.81 1.663 42.24 1.906 48.41 B 25 DB-22255 DB-22254 2.820 71.63 1.000 25.40 1.852 47.04 .750 19.05 1.168 29.67 2.203 55.96 2.446 62.13 C 37 DC-22070 DC-22071 3.468 88.09 1.000 25.40 2.500 63.50 .750 19.05 1.492 37.90 2.851 72.42 3.094 78.59 D 50 DD-21962 DD-21961 3.375 85.73 1.125 28.58 2.406 61.112 .874 21.88 1.437 36.50 2.749 69.82 3.000 76.20 Call Toll Free: 1 (800) 323-9612 4-96 D-subminiature Hardware Accessories Screwlocks * * * * * Screwlocks are designed to retain the same size mated connectors together or to secure the connector to a rack/panel. Screwlocks may be used on plugs or sockets. Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate different panel thicknesses, one lockwasher, and one #4-40 nut. Military female screwlocks include three flat washers. Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the various connector flange sizes and types of backshells or hoods (if applicable). Two screwlocks are required per connector. Military screwlocks meet all requirements of MIL-C-24308. Materials Commercial Screwlock Assemblies: * Male Screwlock Assembly: Clip and screw are steel with zinc plating and yellow chromate finish. * Female Screwlock Assembly: Washers (2), lockwashers, hex nuts, and nuts are steel with zinc plating and yellow chromate finish. M24308 Military Screwlock Assemblies: * Male Screwlock Assembly: Clip and screw are steel with cadmium plating and yellow chromate finish. * Female Screwlock Assembly: Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and yellow chromate finish. 4 Female Screwlock Call Toll Free: 1 (800) 323-9612 Male Screwlock 4-98 D-subminiature Accessories * Screwlock assemblies will not fit D*H or SDH Series backshells. Male Screwlocks Ordering Information Shell Size Positions Commercial: D20419-0 D20419-16 D20419-21 D20420-0 D20420-12 D20420-15 A B in mm in mm 0.250 0.250 0.281 0.250 0.281 0.281 56.35 56.35 63.34 56.35 63.34 63.34 0.033 0.048 0.059 0.033 0.048 0.059 0.84 1.22 1.50 0.84 1.22 1.50 Military MIL-C-24308: M24308/25-9F Per MIL spec M24308/25-10F Per MIL spec E 9 A 15 B 25 C 37 P/S S* P/S S* P* S P/S* P* S P/S* D 50 S P/S* P* P/S P/S P/S P/S P/S NOTE: P = Plug, S= Socket * Indicates use with junction shell Female Screwlocks Ordering Information Shell Size Positions in A E 9 A 15 B 25 C 37 D 50 P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S mm Commercial: D20418-2 D20418-39 0.312 0.628 Military MIL-C-24308: M24308/26-1F M24308/26-2F Per MIL spec Per MIL spec 70.32 141.55 NOTE: P = Plug, S= Socket 4-99 Call Toll Free: 1 (800) 323-9612 4