P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Voltage 6.8 V to 440 V (Uni) 6.8 V to 250 V (Bid) DO-214AC / SMA Power 400 W /ms R FEATURES Low profile package Ideal for automated placement 600 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % Excellent clamping capability Very fast response time Low incremental surge resistance Available in uni-directional and bi-directional Solder dip 260C, 10s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C MECHANICAL DATA Case: DO-214AC (SMA). Epoxy meets UL 94V-0 flammability rating. Polarity: For unidirectional types color band denotes cathode end. No marking on bidirectional types. Terminals : Matte tin plated leads, solderable per MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102. Consumer grade, meets JESD 201 class 1A whisker test. HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test. TYPICAL APPLICATIONS Used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Maximun Ratings and Electrical Characteristics at 25C PPPM Peak Pulse Power Dissipation with 10/1000 s exponential pulse IFSM Peak Forward Surge Current 8.3 ms. (Note 1) (Jedec Method) (Note 2) 40 A VF Max. forward voltage drop at IF = 25 A 3.5 V TJ -TSTG Operating Junction and Storage Temperature Range (Note 1) 400 W - 65 to + 150 C Notes: 1. Only for Unidirectional 2. Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal www.fagorelectronica.com Document Name: p4sma Version: Oct-11 Page Number: 1/8 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Ordering information PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g) P4SMA33A TRTB TRTB 13" diameter tape and reel 7,500 0.060 P4SMA33A TRTS TRTS 7" diameter tape and reel 1,500 0.060 PSMA33A HE3 TRTB TRTB 13" diameter tape and reel 7,500 0.060 P4SMA33A HE3 TRTS TRTS 7" diameter tape and reel 1,500 0.060 P4MA33A HF TRTB TRTB 13" diameter tape and reel 7,500 0.060 P4SMA33CA TRTB TRTB 13" diameter tape and reel 7,500 0.060 P4SMA33CA TRTS TRTS 7" diameter tape and reel 1,500 0.060 P4SMA33CA HE3 TRTB TRTB 13" diameter tape and reel 7,500 0.060 P4SMA33CA HE3 TRTS TRTS 7" diameter tape and reel 1,500 0.060 P4SMA33CA HF TRTB TRTB 13" diameter tape and reel 7,500 0.060 Package Outline Dimensions: (mm) 1.050.2 DO-214AC / SMA +0.1 0.2 -0.05 2.20.3 5.10.3 1.250.25 0.150.1 PREFERRED P/N 1.250.25 Mounting Pad Layout Year code Marking code www.fagorelectronica.com Document Name: p4sma 2 2.60.3 MC WW Y 1.4-0.1 +0.2 Week code 2 4.2 Version: Oct-11 Page Number: 2/8 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Maximum Reverse Leakage Current IRM at VRM Type Marking Code AD (A) (V) 1000 5.50 P4SMA6V8A AE 1000 P4SMA7V5 AF P4SMA7V5A P4SMA8V2 Unidirectional (1) Breakdown Voltage VBR at (V) Max. Clamping Voltage IPP VCL at max. 1 ms. Expo. Nom. Max. (mA) (V) (A) 6.12 6.8 7.48 10 10.8 38 5.80 6.45 6.8 7.14 10 10.5 40 500 6.05 6.75 7.5 8.25 10 11.7 36 AG 500 6.40 7.13 7.5 7.88 10 11.3 37 AH 200 6.63 7.38 8.2 9.02 10 12.5 33 P4SMA8V2A AK 200 7.02 7.79 8.2 8.61 10 12.1 35 P4SMA9V1 AL 50 7.37 8.19 9.1 10.0 1 13.8 30 P4SMA9V1A AM 50 7.78 8.65 9.1 1 13.4 31 P4SMA10 AN 10 8.10 9.00 10 11.0 1 15.0 28 P4SMA10A AP 10 8.55 9.50 10 10.5 1 14.5 29 P4SMA11 AQ 5 8.92 9.90 11 12.1 1 16.2 26 P4SMA11A AR 5 9.40 10.5 11 11.6 1 15.6 27 P4SMA12 AS 5 9.72 10.8 12 13.2 1 17.3 24 P4SMA12A AT 5 10.2 11.4 12 12.6 1 16.7 25 P4SMA13 AU 5 10.5 11.7 13 14.3 1 19.0 22 P4SMA13A AV 5 11.1 12.4 13 13.7 1 18.2 23 P4SMA15 AW 5 12.1 13.5 15 16.5 1 22.0 19 P4SMA15A AX 5 12.8 14.3 15 15.8 1 21.2 20 P4SMA16 AY 5 12.9 14.4 16 17.6 1 23.5 18 P4SMA16A AZ 5 13.6 15.2 16 16.8 1 22.5 19 P4SMA18 BD 5 14.5 16.2 18 19.8 1 26.5 16 P4SMA18A BE 5 15.3 17.1 18 18.9 1 25.5 17 P4SMA20 BF 5 16.2 18.0 20 22.0 1 29.1 14 P4SMA20A BG 5 17.1 19.0 20 21.0 1 27.7 15 P4SMA22 BH 5 17.8 19.8 22 24.2 1 31.9 13 P4SMA22A BK 5 18.8 20.9 22 23.1 1 30.6 14 P4SMA24 BL 5 19.4 21.6 24 26.4 1 34.7 12 P4SMA24A BM 5 20.5 22.8 24 25.2 1 33.2 13 P4SMA27 BN 5 21.8 24.3 27 29.7 1 39.1 11 P4SMA27A BP 5 23.1 25.7 27 28.4 1 37.5 11.2 P4SMA30 BQ 5 24.3 27.0 30 33.0 1 43.5 10 P4SMA30A BR 5 25.6 28.5 30 31.5 1 41.4 10 P4SMA33 BS 5 26.8 29.7 33 36.3 1 47.7 9 P4SMA33A BT 5 28.2 31.4 33 34.7 1 45.7 9 P4SMA36 BU 5 29.1 32.4 36 39.6 1 52.0 8 P4SMA36A BV 5 30.8 34.2 36 37.8 1 49.9 8.4 P4SMA39 BW 5 31.6 35.1 39 42.9 1 56.4 7.4 P4SMA39A BX 5 33.3 37.1 39 41.0 1 53.9 7.8 P4SMA6V8 Min. IR 9.55 (1) Tested with pulses. Pulse test: tp 50 ms; d < 2% www.fagorelectronica.com Document Name: p4sma Version: Oct-11 Page Number: 3/8 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Maximum Reverse Leakage Current Type IRM at Breakdown Voltage VBR at VRM Marking Code BY (A) 5 34.8 P4SMA43A BZ 5 P4SMA47 CD 5 P4SMA47A CE P4SMA51 CF P4SMA51A P4SMA56 Unidirectional (1) (V) Min. Max. Clamping Voltage VCL at IPP max. 1 ms. Expo. Nom. Max. (mA) (V) (A) 38.7 43 47.3 1 61.9 6.8 36.8 40.9 43 45.2 1 59.3 7.1 38.1 42.3 47 51.7 1 67.8 6.2 5 40.2 44.7 47 49.4 1 64.8 5.0 5 41.3 45.9 51 56.1 1 73.5 5.7 CG 5 43.6 48.5 51 53.6 1 70.1 6.0 CH 5 45.4 50.4 56 61.6 1 80.5 5.2 P4SMA56A CK 5 47.8 53.2 56 58.8 1 77.0 5.5 P4SMA62 CL 5 50.2 55.8 62 68.2 1 89.0 4.7 P4SMA62A CM 5 53.0 58.9 62 65.1 1 85.0 5.0 P4SMA68 CN 5 55.1 61.2 68 74.8 1 98.0 4.3 P4SMA68A CP 5 58.1 64.6 68 71.4 1 92.0 4.6 P4SMA75 CQ 5 60.7 67.5 75 82.5 1 108 3.9 P4SMA75A CR 5 64.1 71.3 75 78.8 1 103 4.1 P4SMA82 CS 5 66.4 73.8 82 90.2 1 118 3.6 P4SMA82A CT 5 70.1 77.9 82 86.1 1 113 3.7 P4SMA91 CU 5 73.7 81.9 91 1 131 3.2 P4SMA91A CV 5 77.8 86.5 91 1 125 3.4 P4SMA100 CW 5 81.0 90.0 100 110 1 144 2.9 P4SMA100A CX 5 85.5 95.0 100 105 1 137 3.1 P4SMA110 CY 5 89.2 99.0 110 121 1 158 2.7 P4SMA110A CZ 5 94.0 105 110 116 1 152 2.8 P4SMA120 DD 5 97.2 108 120 132 1 173 2.4 P4SMA120A DE 5 102 114 120 126 1 165 2.5 P4SMA130 DF 5 105 117 130 143 1 187 2.2 P4SMA130A DG 5 111 124 130 137 1 179 2.3 P4SMA150 DH 5 121 135 150 165 1 215 2.0 P4SMA150A DL 5 128 143 150 158 1 207 2.0 P4SMA160 DM 5 130 144 160 176 1 230 1.8 P4SMA160A DN 5 136 152 160 168 1 219 1.9 P4SMA170 DP 5 138 153 170 187 1 244 1.7 P4SMA170A DQ 5 145 162 170 179 1 234 1.8 P4SMA180 DR 5 146 162 180 198 1 258 1.6 P4SMA180A DS 5 154 171 180 189 1 246 1.7 P4SMA200 DT 5 162 180 200 220 1 287 1.5 P4SMA200A DU 5 171 190 200 210 1 274 1.53 P4SMA220 DV 5 175 198 220 242 1 344 1.16 P4SMA220A DX 5 185 209 220 231 1 328 1.22 P4SMA250A DW 5 214 237 250 263 1 344 0.91 P4SMA300A DY 5 256 285 300 315 1 414 0.73 P4SMA400A DJ 5 242 380 400 420 1 548 0.55 P4SMA440A DK 5 376 418 440 462 1 602 0.5 P4SMA43 (V) IR 100 95.5 (1) Tested with pulses. Pulse test: tp 50 ms; d < 2% www.fagorelectronica.com Document Name: p4sma Version: Oct-11 Page Number: 4/8 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Maximum Reverse Leakage Current Type IRM at (1) VRM (A) (V) P4SMA6V8C Marking Code RA 1000 5.50 P4SMA6V8CA RB 1000 P4SMA7V5C RC 500 P4SMA7V5CA RD P4SMA8V2C RE P4SMA8V2CA P4SMA9V1C P4SMA9V1CA Breakdown Voltage VBR at (V) IR Max. Clamping Voltage Ipp VCL at max. 1ms. Expo. Nom. Max. (mA) (V) 6.12 6.8 7.48 10 10.8 38 5.80 6.45 6.8 7.14 10 10.5 38.1 6.05 6.75 7.5 8.25 10 11.7 36 500 6.40 7.13 7.5 7.88 10 11.3 35.4 200 6.63 7.38 8.2 9.02 10 12.5 33 RF 200 7.02 7.79 8.2 8.61 10 12.1 33.1 RG RH 50 50 7.37 7.78 8.19 8.65 9.1 9.1 10.0 9.55 1 1 13.8 13.4 30 29.9 P4SMA10C RI 10 8.10 9.00 10 11.0 1 15.0 28 P4SMA10CA RJ 10 8.55 9.50 10 10.5 1 14.5 27.6 P4SMA11C RK 5 8.92 9.90 11 12.1 1 16.2 26 P4SMA11CA RL 5 9.40 11 11.6 1 15.6 25.6 Bidirectional Min. 10.5 (A) 10.8 12 13.2 1 17.3 24 10.2 11.4 12 12.6 1 16.7 24 5 10.5 11.7 13 14.3 1 19.0 22 5 11.1 12.4 13 13.7 1 18.2 22 RR 5 12.1 13.5 15 16.5 1 22.0 19 RS 5 12.8 14.3 15 15.8 1 21.2 18.9 P4SMA16C RT 5 12.9 14.4 16 17.6 1 23.5 18 P4SMA16CA RU 5 13.6 15.2 16 16.8 1 22.5 17.8 P4SMA18C RV 5 14.5 16.2 18 19.8 1 26.5 16 P4SMA18CA RW 5 15.3 17.1 18 18.9 1 25.5 17 P4SMA20C RX 5 16.2 18.0 20 22.0 1 29.1 14 P4SMA12C RM 5 P4SMA12CA RN 5 P4SMA13C RO P4SMA13CA RP P4SMA15C P4SMA15CA 9.72 P4SMA20CA RY 5 17.1 19.0 20 21.0 1 27.7 14.4 P4SMA22C RZ 5 17.8 19.8 22 24.2 1 31.9 13 P4SMA22CA SA 5 18.8 20.9 22 23.1 1 30.6 13.1 P4SMA24C SB 5 19.4 21.6 24 26.4 1 34.7 12 P4SMA24CA SC 5 20.5 22.8 24 25.2 1 33.2 12 P4SMA27C SD 5 21.8 24.3 27 29.7 1 39.1 11 P4SMA27CA SE 5 23.1 25.7 27 28.4 1 37.5 10.9 P4SMA30C SF 5 24.3 27.0 30 33.0 1 43.5 10 P4SMA30CA SG 5 25.6 28.5 30 31.5 1 41.4 9.7 P4SMA33C SH 5 26.8 29.7 33 36.3 1 47.7 9 P4SMA33CA SI 5 28.2 31.4 33 34.7 1 45.7 9 39.6 P4SMA36C SJ 5 29.1 32.4 36 1 52.0 8 P4SMA36CA SK 5 30.8 34.2 36 37.8 1 49.9 8 1 56.4 7.4 1 53.9 7.4 P4SMA39C SL 5 31.6 35.1 39 42.9 P4SMA39CA SM 5 33.3 37.1 39 41.0 (1) Tested with pulses. Pulse test: tp 50 ms; d < 2% www.fagorelectronica.com Document Name: p4sma Version: Oct-11 Page Number: 5/8 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Maximum Reverse Leakage Current Type IRM at (1) VRM Marking Code SN (A) (V) Min. 5 34.8 38.7 P4SMA43CA SO 5 36.8 P4SMA47C SP 5 P4SMA47CA SR 5 P4SMA51C SS 5 P4SMA51CA SQ 5 P4SMA56C P4SMA56CA ST 5 WQ 5 P4SMA62C SU P4SMA62CA SV P4SMA68C P4SMA68CA P4SMA75C Bidirectional P4SMA43C Breakdown Voltage VBR at (V) IR Max. Clamping Voltage Ipp VCL at max. 1ms. Expo. Max. (mA) (V) (A) 43 47.3 1 61.9 6.8 40.9 43 45.2 1 59.3 6.7 38.1 42.3 47 51.7 1 67.8 6.2 40.2 44.7 47 49.4 1 64.8 6.2 41.3 45.9 51 56.1 1 73.5 5.7 43.6 48.5 51 53.6 1 70.1 5.7 45.4 47.8 50.4 53.2 56 56 61.6 58.8 1 1 80.5 77.0 5.2 5.2 5 50.2 55.8 62 68.2 1 89.0 4.7 5 53.0 58.9 62 65.1 1 85.0 4.7 SW 5 55.1 61.2 68 74.8 1 98.0 4.3 SX 5 58.1 64.6 68 71.4 1 92.0 4.3 SY 5 60.7 67.5 75 82.5 1 108 3.9 78.8 1 103 3.9 90.2 1 118 3.6 86.1 1 113 3.5 1 131 3.2 Nom. P4SMA75CA SZ 5 64.1 71.3 75 P4SMA82C WA 5 66.4 73.8 82 P4SMA82CA PB 5 70.1 77.9 82 P4SMA91C WC 5 73.7 81.9 91 P4SMA91CA PC 5 77.8 86.5 91 1 125 3.2 P4SMA100C WE 5 81.0 90.00 100 110 1 144 2.9 P4SMA100CA PI 5 85.5 95.0 100 105 1 137 2.9 P4SMA110C WG 5 89.2 99.0 110 121 1 158 P4SMA110CA PJ 5 94.0 105 110 116 1 152 2.7 2.0 P4SMA120C WI 5 97.2 108 120 132 1 173 2.4 P4SMA120CA PO 5 102 114 120 126 1 165 1.8 117 130 143 1 187 2.2 100 95.5 P4SMA130C WK 5 105 P4SMA130CA NA 5 111 124 130 137 1 179 1.7 P4SMA150C WM 5 121 135 150 165 1 215 2.0 P4SMA150CA NB 5 128 143 150 158 1 207 1.4 P4SMA160C WO 5 130 144 160 176 1 230 1.8 P4SMA160CA NC 5 136 152 160 168 1 219 1.4 P4SMA170C WR 5 138 153 170 187 1 244 1.7 P4SMA170CA NI 5 145 162 170 179 1 234 1.3 P4SMA180C WT 5 146 162 180 198 1 258 1.6 P4SMA180CA NO 5 154 171 180 189 1 246 1.2 P4SMA200C WV 5 162 180 200 220 1 287 1.5 P4SMA200CA MA 5 171 190 200 210 1 274 1.1 P4SMA220C WX 5 175 198 220 242 1 344 1.16 P4SMA220CA MB 5 185 209 220 231 1 328 0.90 P4SMA250C MI 5 202 225 250 275 1 360 0.90 P4SMA250CA MJ 5 214 237 250 263 1 344 0.87 (1) Tested with pulses. Pulse test: tp 50 ms; d < 2% www.fagorelectronica.com Document Name: p4sma Version: Oct-11 Page Number: 6/8 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Ratings and Characteristics (Ta 25 C unless otherwise noted) Ipp 100 Ipp, Peak Pulse Current - % Ipp Ppp, Peak Pulse Power in % of 25 C DERATING CURVE Ipp /2 50 1 10 s 100 75 50 25 t - time 0 1 ms 0 Pulse wave form 10/1000 25 50 75 100 125 150 175 Temperature in C PEAK PULSE POWER RATING CURVE TYPICAL JUNCTION CAPACITANCE CJ - Junction Capacitance (pF) Ppp, - Peak Pulse Power (W) 10000 20 000 105 4 10 103 102 1s 10s 100s Pulse time-t www.fagorelectronica.com Document Name: p4sma 1ms 10ms T = 25 C f = 1.0 MHz Vsig = 50 mVp-p Measured at Stand-Off Voltage VWM 10 000 1000 1000 Uni-Directional 100 100 10 10 1 Bi-Directional 10 10 100 VBR - Breakdown Voltage (V) Version: Oct-11 Page Number: 7/8 200 P4SMA6V8.......... P4SMA440A P4SMA6V8C........ P4SMA250CA 400 W Surface Mount Transient Voltage Suppressor Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electronica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. www.fagorelectronica.com Document Name: p4sma Version: Oct-11 Page Number: 8/8