Amphenol
625-0005 FCC17-E09PM-210 9 470 10.98 9.98 9.15
625-0010 FCC17-E09PM-240 9 820 10.89 9.98 9.21
625-0015 FCC17-A15PM-210 15 470 14.60 13.38 12.35
625-0020 FCC17-A15PM-240 15 820 14.74 13.52 12.48
625-0025 FCC17-B25PM-210 25 470 16.73 15.44 14.34
625-0030 FCC17-B25PM-240 25 820 17.02 15.71 14.59
625-0035 FCC17-C37PM-210 37 470 22.98 21.22 19.70
625-0040 FCC17-C37PM-240 37 820 23.41 21.61 20.06
Solder Cup (Receptacle) Ñ Fig. A
625-0045 FCC17-E09SM-210 9 470 11.91 10.91 10.07
625-0050 FCC17-E09SM-240 9 820 12.24 11.13 10.20
625-0055 FCC17-A15SM-210 15 470 15.50 14.31 13.29
625-0060 FCC17-A15SM-240 15 820 15.49 14.20 13.10
625-0065 FCC17-B25SM-210 25 470 18.73 17.17 15.85
625-0070 FCC17-B25SM-240 25 820 19.03 17.44 16.10
625-0075 FCC17-C37SM-210 37 470 30.52 28.17 26.16
625-0080 FCC17-C37SM-240 37 820 30.92 28.54 26.51
Straight PCB (Plug) Ñ Fig. B
625-0085 FCC17-E09PE-210 9 470 11.65 10.75 9.98
625-0090 FCC17-E09PE-240 9 820 11.65 10.75 9.98
625-0095 FCC17-A15PE-210 15 470 14.13 13.04 12.11
625-0100 FCC17-A15PE-240 15 820 14.13 13.04 12.11
625-0105 FCC17-B25PE-210 25 470 16.63 15.35 14.25
625-0110 FCC17-B25PE-240 25 820 16.63 15.35 14.25
625-0111 FCC17-C37PE-210 37 470 24.12 22.27 20.68
625-0112 FCC17-C37PE-240 37 820 24.12 22.27 20.68
Straight PCB (Receptacle) Ñ Fig. B
625-0115 FCC17-E09SE-210 9 470 11.65 10.75 9.98
625-0120 FCC17-E09SE-240 9 820 11.65 10.75 9.98
625-0125 FCC17-A15SE-210 15 470 14.13 13.04 12.11
625-0130 FCC17-A15SE-240 15 820 14.13 13.04 12.11
625-0135 FCC17-B25SE-210 25 470 16.63 15.35 14.25
625-0140 FCC17-B25SE-240 25 820 16.63 15.35 14.25
625-0145 FCC17-C37SE-210 37 470 24.12 22.27 20.68
625-0150 FCC17-C37SE-240 37 820 24.12 22.27 20.68
Filtered Connectors
Turn To Section 1 For Allied Office Addresses and Local Phone Numbers ALLIED
c
441
Introduction
The cost of EMI/RFI control has dropped dramatically with the introduction of Amphenol CanadaÕs new
FCC Series of filtered modular jacks, D-subminiature and Micro-Ribbon. At less than half the cost of
previous industry levels, the FCC Series products have already solved EMI/RFI problems for a host of
electronic equipment designers. These filtered connectors are useful for dealing with the two main
EMI/RFI control issues.
FCC Compliance
FCC Docket 20780, Part 15, Subpart J imposes electromagnetic radiation emission limitations upon
manufacturers of both Industrial (Class A) and Commercial (Class B) products. The FCC Series of
filtered connectors are instrumental in passing these requirements because the chief cause of
noncompliance is traceable to noise radiated from the I/O cables. A filtered connector at the I/O port
removes the noise before it exits the system.
Noise Protection
Unwanted EMI/RFI noise or electrostatic discharge can be removed from an I/O cable if a filtered
connector is used at the I/O port. This prevents false signals and protects the equipment from damaging
voltage spikes thereby greatly enhancing device immunity from external effects.
FCC17 Series Ñ Filtered D-Sub Connectors
Designed to provide EIA RS-232 and RS-449 compatibility. Intermateable with standard non-filtered
Amphenol 17 Series D-Subs and connectors meeting MIL-C-24308. Materials. Shell: High strength
zinc diecast or stamped steel. Contacts: Phosphor bronze. Inserts: High strength thermoplastic material
(complies with UL flammability requirements of 94V-O per UL-STD-94). Finish. Shell: Bright tin plating
per MIL-T-10727. Contacts: 15 µ" gold plating per MIL-G-45204 on contact area over 100 µ" nickel
plating. Operating Temperature: Ð40¡C to +85¡C.
Solder Cup (Plug) Ñ Fig. A
Stock Mfr.Õs No. of CAP
No. Type Contacts (pF)
EACH
1-9
625-0155 FCC17-E09PA-410 9 470 11.65 10.75 9.98
625-0160 FCC17-E09PA-440 9 820 11.65 10.75 9.98
625-0165 FCC17-A15PA-410 15 470 14.13 13.04 12.11
625-0170 FCC17-A15PA-440 15 820 14.13 13.04 12.11
625-0175 FCC17-B25PA-410 25 470 16.63 15.35 14.25
625-0180 FCC17-B25PA-440 25 820 16.63 15.35 14.25
625-0185 FCC17-C37PA-410 37 470 21.48 19.69 18.17
625-0190 FCC17-C37PA-440 37 820 24.12 22.27 20.68
.318 (Footprint) Right Angle PCB with 4-40 Thread (Receptacle) Ñ Fig. C
625-0195 FCC17-E09SA-410 9 470 11.65 10.75 9.98
625-0200 FCC17-E09SA-440 9 820 11.65 10.75 9.98
625-0205 FCC17-A15SA-410 15 470 14.13 13.04 12.11
625-0210 FCC17-A15SA-440 15 820 12.59 11.54 10.66
625-0215 FCC17-B25SA-410 25 470 14.80 13.57 12.52
625-0220 FCC17-B25SA-440 25 820 16.63 15.35 14.25
625-0225 FCC17-C37SA-410 37 470 24.12 22.27 20.68
625-0230 FCC17-C37SA-440 37 820 24.12 22.27 20.68
Male Plug to Female Receptacle Adapter Ñ Fig. D
625-0235 FCC17-E09AD-210 9 470 26.93 24.86 23.08
625-0240 FCC17-E09AD-240 9 820 27.58 25.28 23.33
625-0245 FCC17-E09AD-290 9 5600 28.37 26.01 24.01
625-0250 FCC17-A15AD-210 15 470 30.28 27.95 25.95
625-0255 FCC17-A15AD-240 15 820 30.28 27.95 25.95
625-0260 FCC17-A15AD-290 15 5600 31.52 29.09 27.02
625-0265 FCC17-B25AD-210 25 470 33.71 31.12 28.90
625-0270 FCC17-B25AD-240 25 820 33.71 31.12 28.90
625-0275 FCC17-B25AD-290 25 5600 35.82 33.06 30.70
625-0280 FCC17-C37AD-210 37 470 40.02 36.94 34.30
625-0285 FCC17-C37AD-240 37 820 40.02 36.94 34.30
625-0290 FCC17-C37AD-290 37 5600 43.16 39.84 37.00
.318 (Footprint) Right Angle PCB with 4-40 Thread (Plug) Ñ Fig. C
Stock Mfr.Õs No. of CAP
No. Type Contacts (pF)
EACH
1-9
50-9910-49
10-49 50-99
Filtered and Shielded
Modular Jacks
The FRJ series of Shielded and FIltered Modular
Jacks offers low cost and effective EMC control
within standard RJ-45 connector footprints.
EMC control is offered by a completely shielded
connector and/or with the use of a high
resistivity, high impedance ferrite block. No board layout changes are required for its use. Simply replace
the standard non-filtered connector for superior EMC performance.
Materials. Shield: Copper alloy. Contacts: Phosphor bronze; 30 µ" (0.76 microns) gold over nickel.
Insert: Thermoplastic (complies with UL 94V-O). Filter: High impedance, high resistivity, ferrite block.
Electrical. Current Rating: 1.5 amps. Voltage Rating: 125 volts AC. UL File No.: E135615. CSA File
No.: LR68598-11.
Non-Shielded Ñ 8-Contacts
Stock Mfr.Õs Description
No. Type
EACH
1-49 50-99 100-249
625-0330 FRJA-448 Filtered 1.55 1.24 1.05
Shielded and Filtered Ñ 8-Contacts
625-0335 FRJA-488 Shielded 2.21 1.76 1.49
625-0340 FRJA-468 Filtered and Shielded 2.87 2.31 1.91
625-0345 FRJA-438 Shielded 1.95 1.58 1.31
625-0350 FRJA-418 Filtered and Shielded 2.87 2.29 1.92
RJ VistaªHigh Speed
RJ-45 Modular Jacks
RJ Vista
ª
is a family of single and multiport
modular jack connectors with built-in LEDs,
designed for Category 5 performance. This product
is ideal for LAN applications such as adapter cards
and routers. Shielded and non-shielded versions
are available, with a variety of LED colors, and ports. U.L. File #E135615, CSA File #LR68598.
Materials. Shield: Copper alloy/tin-lead plated. Contacts: Phosphor bronze; 50 µ" (1.27 microns) gold
over nickel on mating surfaces, tin/lead on contact tails. Insert: Thermoplastic (complies with UL94V-0).
Current Rating: 1.5 amps. Voltage Rating: 125 VAC.
Non-Shielded Ñ 8 Contacts
Stock Mfr.Õs LED 1 LED2
No. Type
EACH
1-49 50-99 100-249
625-0355 RJHS-5080 None None 1.13 .90 .75
625-0360 RJHS-5081 Green Yellow 1.32 1.04 .86
625-0365 RJHS-5084 Yellow Green 1.32 1.04 .86
625-0370 RJHS-5085 Green Green 1.39 1.10 .91
Shielded Ñ 8 Contacts
625-0375 RJHS-5380 None None 1.82 1.46 1.21
625-0380 RJHS-5381 Green Yellow 2.11 1.69 1.41
625-0385 RJHS-5384 Yellow Green 2.00 1.60 1.34
625-0390 RJHS-5385 Green Green 2.11 1.69 1.41
8
