ESD Static Shielding Bags i Side seam is 3/8in ( 0.10in) Tolerance L : 0.250 / W : 0.250in Specifications Material thickness : 0.003in (0.0762mm) nominal, 10% Surface Resistance Outer layer : < 10E11 ohms per ANSI / ESD S11.11 Inner layer : < 10E11 ohms per ANSI / ESD S11.11 Static shielding : < 50 nJ per ANSI/ESD S11.31 Light transmission : > 40% per ASTM 1003 www.element14.com www.farnell.com www.newark.com Page <1> 17/04/12 V1.0 ESD Static Shielding Bags Part Number Table Description ESD Static Shielding Bags Size (W x L) Inches Part Number MC36463 8 x 24 MC36482 3x7 MC36464 10 x 16 MC36483 4x4 MC36465 10 x 18 MC36484 4x8 MC36466 10 x 24 MC36485 Size (W x L) Inches Part Number 3x4 Description 4x9 MC36467 10 x 30 MC36486 4 x 24 MC36468 12 x 25 MC36487 4 x 25 MC36469 14 x 18 MC36488 5x7 MC36470 15 x 18 MC36489 5 x 10 MC36471 15 x 19 MC36490 6x6 MC36472 16 x 18 MC36491 ESD Static Shielding Bags 6x9 MC36473 16 x 20 MC36492 6 x 12 MC36474 16 x 24 MC36493 6 x 14 MC36475 18 x 24 MC36494 6 x 18 MC36476 22 x 23 MC36495 7 x 15 MC36477 22 x 25 MC36496 8x8 MC36478 22 x 28 MC36497 8 x 14 MC36479 24 x 30 MC36498 8 x 16 MC36480 30 x 30 MC36499 8 x 18 MC36481 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 17/04/12 V1.0