SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
PNP/NPN Epitaxial Planar Silicon Transistors
High-Current Switching Applications
Ordering number:EN2113B
2SB1202/2SD1802
92098HA (KT)/8259MO/4137KI/4116KI, TS No.2113–1/5
Package Dimensions
unit:mm
2045B [2SB1202/2SD1802]
Applications
· Voltage regulators, relay drivers, lamp drivers,
electrical equipment.
Features
· Adoption of FBET, MBIT processes.
· Large currrent capacity and wide ASO.
· Low collector-to-emitter saturation voltage.
· Fast switching speed.
· Small and slim package making it easy to make
2SB1202/2SD1802-used sets smaller. 1 : Base
2 : Collector
3 : Emitter
4 : Collector
SANYO : TP
unit:mm
2044B [2SB1202/2SD1802]
1 : Base
2 : Collector
3 : Emitter
4 : Collector
SANYO : TP-FA
2SB1202/2SD1802
No.2113–2/5
( ) : 2SB1202
Specifications
Absolute Maximum Ratings at Ta = 25˚C
˚C
˚C
Electrical Characteristics at Ta = 25˚C
Tc=25˚C
Switching Time T est Circuit
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
OBC 06)–(V
egatloVrettimE-ot-rotcelloCV
OEC 05)–(V
egatloVesaB-ot-rettimEV
OBE 6)–(V
tnerruCrotcelloCI
C3)–(A
)esluP(tnerruCrotcelloCI
PC 6)–(A
noitapissiDrotcelloCP
C1W
51W
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
tnerruCffotuCrotcelloCI
OBC VBC I,V04)–(= E0=1)–(Aµ
tnerruCffotuCrettimEI
OBE VBE I,V4)–(= C0=1)–(Aµ
niaGtnerruCCDh
EF 1V
EC I,V2)–(= CAm001)–(= *001*065
hEF 2V
EC I,V2)–(= CA3)–(= 53
tcudorPhtdiwdnaB-niaGf
TVEC I,V01)–(= CAm05)–(= 051zHM
ecnaticapaCtuptuOC
bo VBC zHM1=f,V01)–(=52)93(Fp
egatloVnoitarutaSrettimE-ot-rotcelloCV
)tas(EC ICI,A2)–(= BAm001)–(= 91.05.0V
)53.0–()7.0–(V
egatloVnoitarutaSrettimE-ot-esaBV
)tas(EB ICI,A2)–(= BAm001)–(=49.0)–(2.1)–(V
egatloVnwodkaerBesaB-ot-rotcelloCV
OBC)RB( ICI,Aµ01)–(= E0=06)–(V
egatloVnwodkaerBrettimE-ot-rotcelloCV
OEC)RB( ICR,Am1)–(= EB =∞05)–(V
egatloVnwodkaerBesaB-ot-rettimEV
OBE)RB( IEI,Aµ01)–(= C0=6)–(V
emiTNO-nruTt
no tiucriCtseTdeificepseeS07sn
emiTegarotSt
gts tiucriCtseTdeificepseeS )054(sn
056sn
emiTllaFt
ftiucriCtseTdeificepseeS53sn
* : The 2SB1202/2SD1802 are classified by 100mA hFE as follows :
002R001082S041004T002065U082
2SB1202/2SD1802
No.2113–3/5
2SB1202/2SD1802
No.2113–4/5
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
2SB1202/2SD1802
PS No.2113–5/5
