Technical Data 10391 Effective September 2017 Supersedes April 2015 FP1507R High current power inductors Applications * Compatible with Picor(R) Cool-Power(R) ZVS Buck and Buck-Boost Regulator Families Environmental Data Product features * Magnetically shielded * 15.1 x 8.5 mm footprint surface mount package in a 6.7 mm height * Ferrite core material * Storage temperature range (component): -55 C to +125 C * Operating temperature range: -55 C to +125 C (ambient plus self-temperature rise) * Solder reflow temperature: * J-STD-020 (latest revision) compliant HALOGEN Pb HF FREE Picor(R) and Cool-Power(R) are trademarks of Vicor Corporation. FP1507R High current power inductors Technical Data 10391 Effective September 2017 Product Specifications Part Number5 OCL1 (nH) 10% FLL2 (nH) minimum Irms3 (A) Isat4 (A) DCR (m) @ +20 C 10% FP1507R1-R185-R 185 163 45 40 0.52 1. Open Circuit Inductance (OCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 C 2. Full Load Inductance (FLL) Test Parameters: 1.0 MHz, 0.1 Vrms, Isat, +25 C 3. Irms: DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed +125 C under worst case operating conditions verified in the end application. 4. Isat: Peak current for approximately 2% rolloff @ +25 C 5. Part Number Definition: FP1507Rx-Ryyy-R FP1507R = Product code and size x= DCR indicator Ryyy= yyy= inductance value in H, R= decimal point -R suffix = RoHS compliant Note: Hipot: 250Vdc minimum for 2 seconds, 1.0mA, conductor to core Dimensions (mm) 6.7 max 2.8 0.3 14.6 0.5 Recommended Pad Layout Schematic 3.2 8.5 max 3.0 2.5 0.10 8.6 15.0 Part marking: FP1507Rx (x=DCR indicator), -Ryyy= (inductance value in uH, R=decimal point) wwllyy= date code, R=revision level Tolerances are 0.25 unless stated otherwise Soldering surfaces to be coplanar within 0.1 millimeters DCR measured from point "a" to point "b" Do not route traces or vias underneath the inductor. Packaging information (mm) Supplied in tape and reel packaging, 600 parts per 13" diameter reel User direction of feed 2 www.eaton.com/electronics FP1507R High current power inductors Technical Data 10391 Effective September 2017 Inductance characteristics FP1507R1-R185-R 110% 100% 90% % of OCL -40C +25C 80% 70% +125C 60% 50% 40% 30% 0 10 20 0 3 40 50 60 70 80 90 100 Idc(A) www.eaton.com/elx 3 FP1507R High current power inductors Technical Data 10391 Effective September 2017 Solder reflow profile TP TC -5C tP Max. Ramp Up Rate = 3C/s Max. Ramp Down Rate = 6C/s Temperature TL Preheat A T smax t Table 1 - Standard SnPb Solder (Tc) Package Thickness Volume mm3 <350 Volume mm3 350 <2.5mm) 235C 220C 2.5mm 220C 220C Table 2 - Lead (Pb) Free Solder (Tc) Tsmin 25C ts Time 25C to Peak Package Thickness Volume mm3 <350 Volume mm3 350 - 2000 Volume mm3 >2000 <1.6mm 260C 260C 260C 1.6 - 2.5mm 260C 250C 245C >2.5mm 250C 245C 245C Time Reference JDEC J-STD-020D Profile Feature Preheat and Soak * Temperature min. (Tsmin) Standard SnPb Solder Lead (Pb) Free Solder 100C 150C * Temperature max. (Tsmax) 150C 200C * Time (Tsmin to Tsmax) (ts) 60-120 Seconds 60-120 Seconds Average ramp up rate Tsmax to Tp 3C/ Second Max. 3C/ Second Max. Liquidous temperature (Tl) Time at liquidous (tL) 183C 60-150 Seconds 217C 60-150 Seconds Peak package body temperature (TP)* Table 1 Table 2 Time (tp)** within 5 C of the specified classification temperature (Tc) 20 Seconds** 30 Seconds** Average ramp-down rate (Tp to Tsmax) 6C/ Second Max. 6C/ Second Max. Time 25C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics (c) 2017 Eaton All Rights Reserved Printed in USA Publication No. 10391- BU-SB15164 Septemberl 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Eaton: FP1507R1-R185-R