18
PRODUCT CATALOGUE - STEGO
Art. No. Heating capacity² Inrush current max. Recommended pre-fuse T (time-delay) Length (L) Weight (approx.)
14000.0-00 15 W 1.5 A 2.0 A 65 mm 0.3 kg
14001.0-00 30 W 3.0 A 4.0 A 65 mm 0.3 kg
14003.0-00 45 W 3.5 A 4.0 A 65 mm 0.3 kg
14005.0-00 60 W 2.5 A 4.0 A 140 mm 0.4 kg
14006.0-00 75 W 4.0 A 6.3 A 140 mm 0.5 kg
14007.0-00 100 W 4.5 A 8.0 A 140 mm 0.5 kg
14008.0-00 150 W 9.0 A 10.0 A 220 mm 0.7 kg
² at +20 °C (+68 °F) ambient temperature
These heaters are used in enclosures where damage from condensation must be prevented, or where the tempe
rature
may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distri
butes
the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and
simplify installation.
> Pressure clamp connectors
> Dynamic heating up
> Wide voltage range
> Energy saving
> Clip fixing
> Quick installation
TECHNICAL DATA
Operating voltage AC/DC 120 – 240 V¹ (min. 110 V, max. 265 V)
Heating element PTC resistor – temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5 – 1.5 mm² (with wire
end ferrule) and rigid wire 0.5 – 2.5 mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35 mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70 °C (-49 to +158 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Approvals VDE, UL File No. E150057, EAC
Accessoires screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Note other voltages on request
¹ Operating with voltages below AC/DC 140 V reduces heating performance by approx. 10 %.
SEMICONDUCTOR HEATER
HG 140 | 15 W to 150 W
HEATING
19.03.2019 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se
18TECHNICAL DATASHEET
