TVP5158, TVP5157, TVP5156 Four-Channel NTSC/PAL Video Decoders With Independent Scalers, Noise Reduction, Auto Contrast, and Flexible Output Formatter for Security and Other Multi-Channel Video Applications Data Manual PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Literature Number: SLES243G July 2009 - Revised April 2013 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Contents 1 Introduction 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 2 ....................................................................................................... 12 ....................................................................................................................... 12 Functional Description ....................................................................................................... 15 3.1 Analog Video Processing and A/D Converters ........................................................................ 15 3.1.1 Analog Video Input ............................................................................................. 15 3.1.2 Analog Video Input Clamping ................................................................................. 16 3.1.3 A/D Converter ................................................................................................... 16 3.2 Digital Video Processing .................................................................................................. 16 3.2.1 2x Decimation Filter ............................................................................................ 16 3.2.2 Automatic Gain Control ........................................................................................ 16 3.2.3 Composite Processor .......................................................................................... 16 3.2.3.1 Color Low-Pass Filter .............................................................................. 17 3.2.3.2 Y/C Separation ..................................................................................... 18 3.2.4 Luminance Processing ......................................................................................... 19 3.3 AVID Cropping ............................................................................................................. 20 3.4 Embedded Syncs .......................................................................................................... 20 3.5 Scaler ....................................................................................................................... 21 3.6 Noise Reduction ........................................................................................................... 21 3.7 Auto Contrast .............................................................................................................. 21 3.8 Output Formatter .......................................................................................................... 22 3.8.1 Non-Interleaved Mode ......................................................................................... 22 3.8.2 Pixel-Interleaved Mode ......................................................................................... 22 3.8.2.1 2-Ch Pixel-Interleaved Mode ..................................................................... 23 3.8.2.2 4-Ch Pixel-Interleaved Mode ..................................................................... 23 3.8.2.3 Metadata Insertion for Non-Interleave Mode and Pixel-Interleaved Mode ................. 24 3.8.3 Line-Interleaved Mode Support (TVP5158 only) ........................................................... 25 3.8.3.1 2-Ch Line-Interleaved Mode ...................................................................... 25 3.8.3.2 4-Ch Line-Interleaved Mode ...................................................................... 26 3.8.3.3 8-Ch Line-Interleaved Mode ...................................................................... 26 3.8.3.4 Hybrid Modes ....................................................................................... 28 3.8.3.5 Metadata Insertion for Line-Interleaved Mode ................................................. 28 3.9 Audio Sub-System (TVP5157 and TVP5158 Only) ................................................................... 31 3.9.1 Features ......................................................................................................... 31 3.9.2 Audio Sub-System Functional Diagram ..................................................................... 32 3.9.3 Serial Audio Interface .......................................................................................... 33 3.9.4 Analog Audio Input Clamping ................................................................................. 33 3.9.5 Audio Cascade Connection ................................................................................... 34 3.10 I2C Host Interface .......................................................................................................... 36 3.10.1 I2C Write Operation ............................................................................................. 37 3.10.2 I2C Read Operation ............................................................................................ 37 3.10.3 VBUS Access ................................................................................................... 39 3.11 Clock Circuits .............................................................................................................. 40 Terminal Assignments 2.1 3 2 ........................................................................................................................ 8 Features ...................................................................................................................... 8 Applications .................................................................................................................. 9 Description ................................................................................................................... 9 Related Products ............................................................................................................ 9 Trademarks ................................................................................................................ 10 Document Conventions ................................................................................................... 10 Ordering Information ...................................................................................................... 10 Functional Block Diagram ................................................................................................ 11 Pinout Contents Copyright (c) 2009-2013, Texas Instruments Incorporated TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 ................................................................................................................ 41 ................................................................................................... 42 4.1 Overview .................................................................................................................... 42 4.2 Register Definitions ....................................................................................................... 45 5 Electrical Specifications ..................................................................................................... 90 5.1 Absolute Maximum Ratings .............................................................................................. 90 5.2 Recommended Operating Conditions .................................................................................. 91 5.3 Reference Clock Specifications ......................................................................................... 91 5.4 Electrical Characteristics ................................................................................................. 92 5.5 DC Electrical Characteristics ............................................................................................. 92 5.6 Video A/D Converters Electrical Characteristics ...................................................................... 93 5.7 Audio A/D Converters Electrical Characteristics ...................................................................... 93 5.8 Video Output Clock and Data Timing ................................................................................... 94 5.8.1 Video Input Clock and Data Timing .......................................................................... 94 5.9 I2C Host Port Timing ...................................................................................................... 95 5.9.1 I2S Port Timing .................................................................................................. 96 5.10 Miscellaneous Timings .................................................................................................... 96 5.11 Power Dissipation Ratings ............................................................................................... 96 6 Application Information ...................................................................................................... 97 6.1 4-Ch D1 Applications ..................................................................................................... 97 6.2 8-Ch CIF Applications ..................................................................................................... 97 6.3 16-Ch CIF Applications ................................................................................................... 98 6.4 Application Circuit Examples ............................................................................................. 99 6.5 Designing with PowerPADTM Devices ................................................................................. 100 Revison History ........................................................................................................................ 101 3.12 4 Reset Mode Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Contents 3 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com List of Figures 1-1 Functional Block Diagram ....................................................................................................... 11 3-1 Video Analog Processing and ADC Block Diagram ......................................................................... 15 3-2 Anti-Aliasing Filter Frequency Response 3-3 Composite Processor Block Diagram.......................................................................................... 17 3-4 Color Low-Pass Filter Frequency Response 3-5 Color Low-Pass Filter with Filter Characteristics, NTSC/PAL ITU-R BT.601 Sampling................................. 18 3-6 Chroma Trap Filter Frequency Response, NTSC ITU-R BT.601 Sampling .............................................. 19 3-7 Chroma Trap Filter Frequency Response, PAL ITU-R BT.601 Sampling ................................................ 19 3-8 Luminance Edge-Enhancer Peaking Block Diagram ........................................................................ 20 3-9 Peaking Filter Response, NTSC/PAL ITU-R BT.601 Sampling ............................................................ 20 3-10 2-Ch Pixel-Interleaved Mode Timing Diagram................................................................................ 23 3-11 4-Ch Pixel-Interleaved Mode Timing Diagram................................................................................ 24 3-12 Cascade Connection for 16-Ch CIF Recoding and Multi-Ch CIF Preview 3-13 Cascade Connection for 16-Ch CIF Recoding and Multi-Ch Half-D1 Preview ........................................... 28 3-14 Cascade Connection for 16-Ch CIF Recoding and 2-Ch D1/Multi-Ch CIF Preview ..................................... 28 3-15 Start Code in 8-Bit BT.656 Interface ........................................................................................... 29 3-16 Start Code in 16-Bit YCbCr 4:2:2 Interface ................................................................................... 30 3-17 Audio Sub-System Functional Diagram ....................................................................................... 33 3-18 Serial Audio Interface Timing Diagram ........................................................................................ 33 3-19 Audio Cascade Connection ..................................................................................................... 34 3-20 VBUS Access ..................................................................................................................... 39 3-21 Clock and Crystal Connectivity ................................................................................................. 40 ..................................................................................... ................................................................................. ............................................... 16 18 27 3-22 Reset Timing ...................................................................................................................... 41 5-1 Video Output Clock and Data Timing .......................................................................................... 94 5-2 I2C Host Port Timing ............................................................................................................. 95 6-1 4-Ch D1 Application (Single BT.656 Interface) ............................................................................... 97 6-2 4-Ch D1 Application (16-Bit YCbCr 4:2:2 Interface) ......................................................................... 97 6-3 8-Ch CIF Real Time Encoding and Multi-Ch D1 Preview Application ..................................................... 98 6-4 8-Ch CIF Real Time Encoding and Multi-Ch D1 Preview Application ..................................................... 98 6-5 Video Input Connectivity ....................................................................................................... 100 6-6 Audio Input Connectivity ....................................................................................................... 100 4 List of Figures Copyright (c) 2009-2013, Texas Instruments Incorporated TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 List of Tables 1-1 Device Options ..................................................................................................................... 9 2-1 Terminal Functions 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 4-24 4-25 4-26 .............................................................................................................. EAV and SAV Sequence ........................................................................................................ Standard Video Resolutions .................................................................................................... Video Resolutions Converted by the Scaler .................................................................................. Summary of Line Frequencies, Data Rates and Pixel Counts for Different Standards ................................. Output Ports Configuration for Non-Interleaved Mode ...................................................................... Output Ports Configuration for Pixel-Interleaved Mode ..................................................................... VDET Statues Insertion in SAV/EAV Codes .................................................................................. Channel ID Insertion in Horizontal Blanking Code ........................................................................... Channel ID Insertion in SAV/EAV Code Sequence .......................................................................... Output Ports Configuration for Line-Interleaved Mode ...................................................................... Default Super-Frame Format and Timing ..................................................................................... Bit Assignment of 4-Byte Start Code for Active Video Line................................................................. Bit Field Definition of 4-Byte Start Code for Active Video Line ............................................................. Bit Assignment of 4-Byte Start Code for the Dummy Line .................................................................. Serial Audio Output Channel Assignment..................................................................................... I2C Terminal Description ........................................................................................................ I2C Host Interface Device Addresses .......................................................................................... Reset Mode ....................................................................................................................... Reset Sequence .................................................................................................................. Registers Summary .............................................................................................................. Status 1 ........................................................................................................................... Status 2 ........................................................................................................................... Color Subcarrier Phase Status ................................................................................................ ROM Version ..................................................................................................................... RAM Version MSB .............................................................................................................. RAM Version LSB ............................................................................................................... Chip ID MSB ..................................................................................................................... Chip ID LSB ...................................................................................................................... Video Standard Status .......................................................................................................... Video Standard Select .......................................................................................................... CVBS Autoswitch Mask ......................................................................................................... Auto Contrast Mode ............................................................................................................. Luminance Brightness .......................................................................................................... Luminance Contrast ............................................................................................................. Brightness and Contrast Range Extender .................................................................................... Chrominance Saturation ........................................................................................................ Chrominance Hue ............................................................................................................... Color Killer ........................................................................................................................ Luminance Processing Control 1 .............................................................................................. Luminance Processing Control 2 .............................................................................................. Power Control .................................................................................................................... Chrominance Processing Control 1 ........................................................................................... Chrominance Processing Control 2 ........................................................................................... AGC Gain Status ................................................................................................................ Back-End AGC Status .......................................................................................................... Copyright (c) 2009-2013, Texas Instruments Incorporated List of Tables 13 20 21 21 22 22 23 24 24 24 25 29 30 30 31 35 36 36 41 41 42 45 46 46 46 47 47 47 47 48 48 49 49 49 50 50 50 51 51 52 52 53 54 54 55 55 5 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com .................................................................................................................. ................................................................................................................ Luma ALC Freeze Upper Threshold .......................................................................................... Chroma ALC Freeze Upper Threshold ....................................................................................... AGC Increment Speed .......................................................................................................... AGC Increment Delay ........................................................................................................... AGC Decrement Speed ......................................................................................................... AGC Decrement Delay ......................................................................................................... AGC White Peak Processing .................................................................................................. Back-End AGC Control ......................................................................................................... AFE Fine Gain ................................................................................................................... AVID Start Pixel .................................................................................................................. AVID Pixel Width ................................................................................................................ Noise Reduction Max Noise .................................................................................................... Noise Reduction Control ........................................................................................................ Noise Reduction Noise Filter Beta ............................................................................................ Operation Mode Control ........................................................................................................ Color PLL Speed Control ....................................................................................................... Sync Height Low Threshold .................................................................................................... Sync Height High Threshold ................................................................................................... Clear Lost Lock Detect .......................................................................................................... VSYNC Filter Shift ............................................................................................................... 656 Version/F-bit Control ....................................................................................................... F-Bit and V-Bit Decode Control ................................................................................................ F-Bit and V-Bit Control .......................................................................................................... Output Timing Delay ............................................................................................................ Auto Contrast User Table Index ............................................................................................... Blue Screen Y Control .......................................................................................................... Blue Screen Cb Control ........................................................................................................ Blue Screen Cr Control ......................................................................................................... Blue Screen LSB Control ....................................................................................................... Noise Measurement ............................................................................................................. Weak Signal High Threshold ................................................................................................... Weak Signal Low Threshold ................................................................................................... Noise Reduction Y/U/V T0 ..................................................................................................... Vertical Line Count Status ...................................................................................................... Output Formatter Control 1 ..................................................................................................... Output Formatter Control 2 ..................................................................................................... Interrupt Control ................................................................................................................. Embedded Sync Offset Control 1 ............................................................................................. Embedded Sync Offset Control 2 ............................................................................................. AVD Output Control 1 ........................................................................................................... AVD Output Control 2 ........................................................................................................... OFM Mode Control .............................................................................................................. OFM Channel Select 1 .......................................................................................................... OFM Channel Select 2 .......................................................................................................... OFM Channel Select 3 .......................................................................................................... OFM Super-Frame Size ........................................................................................................ 4-27 Status Request 55 4-28 AFE Gain Control 55 4-29 4-30 4-31 4-32 4-33 4-34 4-35 4-36 4-37 4-38 4-39 4-40 4-41 4-42 4-43 4-44 4-45 4-46 4-47 4-48 4-49 4-50 4-51 4-52 4-53 4-54 4-55 4-56 4-57 4-58 4-59 4-60 4-61 4-62 4-63 4-64 4-65 4-66 4-67 4-68 4-69 4-70 4-71 4-72 4-73 4-74 6 List of Tables 56 56 56 56 57 57 58 59 59 60 60 60 61 61 62 62 63 63 63 63 64 65 66 66 67 67 67 68 68 68 68 68 69 69 69 70 70 70 71 72 73 74 75 76 76 77 Copyright (c) 2009-2013, Texas Instruments Incorporated TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 ....................................................................................................... ............................................................................................................... Audio Sample Rate Control .................................................................................................... Analog Audio Gain Control 1 ................................................................................................... Analog Audio Gain Control 2 ................................................................................................... Audio Mode Control ............................................................................................................. Audio Mixer Select .............................................................................................................. Audio Mute Control .............................................................................................................. Analog Mixing Ratio Control 1 ................................................................................................. Analog Mixing Ratio Control 2 ................................................................................................. Audio Cascade Mode Control .................................................................................................. Super-Frame EAV2SAV Duration Status ..................................................................................... Super-Frame SAV2EAV Duration Status ..................................................................................... VBUS Data Access With No VBUS Address Increment ................................................................... VBUS Data Access With VBUS Address Increment ........................................................................ VBUS Address Access ......................................................................................................... Interrupt Status .................................................................................................................. Interrupt Mask .................................................................................................................... Interrupt Clear .................................................................................................................... Decoder Write Enable .......................................................................................................... Decoder Read Enable .......................................................................................................... 4-75 OFM EAV2SAV Duration 77 4-76 Misc OFM Control 78 4-77 4-78 4-79 4-80 4-81 4-82 4-83 4-84 4-85 4-86 4-87 4-88 4-89 4-90 4-91 4-92 4-93 4-94 4-95 Copyright (c) 2009-2013, Texas Instruments Incorporated List of Tables 78 79 80 81 82 83 83 84 84 84 85 85 85 85 86 87 88 88 89 7 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Four-Channel NTSC/PAL Video Decoders Check for Samples: TVP5158, TVP5157, TVP5156 1 Introduction 1.1 Features 1234 * Common Device Features (TVP5158, TVP5157, and TVP5156) - Four separate video decoder channels having the following features for each channel * Accepts NTSC (J, M, 4.43) and PAL (B, D, G, H, I, M, N, Nc, 60) video data * Composite video inputs, pseudodifferential video inputs to improved noise immunity * High-speed 10-bit ADC * Fully differential CMOS analog preprocessing channels with clamping * Integrated anti-aliasing filter * 2D 5-line (5H) adaptive comb filter * Noise reduction and auto contrast * Robust automatic video standard detection (NTSC/PAL) and switching * Programmable hue, saturation, sharpness, brightness, and contrast * Luma-peaking processing * Patented architecture for locking to weak, noisy, or unstable signals - Four independent scalers support horizontal and/or vertical 2:1 downscaling - Channel multiplexing capabilities with metadata insertion * Pixel-interleaved mode supports up to four-channel D1 multiplexed 8-bit output at 108 MHz * Supports concurrent NTSC and PAL inputs - Support crystal interface with on-chip oscillator and single clock input mode - Single 27-MHz clock input or crystal for all standards and all channels - Internal phase-locked loop (PLL) for linelocked clock (separate for each channel) and sampling - Standard programmable video output format * ITU-R BT.656, 8-bit 4:2:2 with embedded syncs * YCbCr 16-bit 4:2:2 with embedded syncs - MacrovisionTM copy protection detection - 3.3-V compatible I/O - 128-pin TQFP package - Available in commercial (0C to 70C) temperature range * Additional TVP5158 and TVP5157 Specific Features - Integrated four-channel audio ADC with audio sample rate of 8 kHz or 16 kHz - Support Master and Slave mode I2S Output - Support audio cascade connection * Additional TVP5158 Specific Features - Enhanced channel multiplexing capability - Line-interleaved mode - Four-channel D1 multiplexed output at 8 bit at 108 MHz - Video cascade connection for 8-Ch CIF, 8-Ch Half-D1, and 8-Ch CIF + 1-Ch D1 outputs - Also available in Industrial (-40C to 85C) temperature range * Qualified for Automotive Applications (AEC-Q100 Rev G - TVP5158IPNPQ1, TVP5158IPNPRQ1) 1 2 3 4 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. DaVinci is a trademark of Texas Instruments. Macrovision is a trademark of Macrovision Corporation. All other trademarks are the property of their respective owners. Copyright (c) 2009-2013, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. TVP5158, TVP5157, TVP5156 www.ti.com 1.2 * * * * SLES243G - JULY 2009 - REVISED APRIL 2013 Applications Security and surveillance digital video recorders or servers and PCI products Automotive infotainment video hub Large format video wall displays Game systems 1.3 Description The TVP5158, TVP5157, and TVP5156 devices are 4-channel high-quality NTSC/PAL video decoders that digitize and decode all popular base-band analog video formats into digital video output. Each channel of this decoder includes 10-bit 27-MSPS A/D converter (ADC). Preceding each ADC in the device, the corresponding analog channel contains an analog circuit that clamps the input to a reference voltage and applies the gain. Composite input signal is sampled at 2x the ITU-R BT.601 clock frequency, line-locked alignment, and is then decimated to the 1x pixel rate. CVBS decoding uses five-line adaptive comb filtering for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts. A chroma trap filter is also available. On CVBS inputs, the user can control video characteristics such as contrast, brightness, saturation, and hue via an I2C host port interface. Furthermore, luma peaking (sharpness) with programmable gain is included. All four channels are independently controllable. These decoders share a single clock input for all channels and for all supported standards. TVP5158 provides a glueless audio and video interface to TI DaVinciTM video processors. Video output ports support 8-bit ITU-R BT.656 and 16-bit 4:2:2 YCbCr with embedded synchronization. TVP5158 supports multiplexed pixel-interleaved and line-interleaved mode video outputs with metadata insertion. TVP5158 and TVP5157 integrate 4-Ch audio ADCs to reduce the BOM cost for surveillance market. Multiple TVP5158 devices can be cascade connected to support up to 8-Ch Video or 16-Ch audio processing. Noise reduction and auto contrast functions improve the video quality under low light condition which is very critical for surveillance products. The TVP5158, TVP5157, and TVP5156 can be programmed by using a single I2C serial interface. I2C commands can be sent to one or more decoder cores simultaneously, reducing the amount of I2C activity necessary to configure each core. This is especially useful for fast downloading modified firmware to the decoder cores. TVP5158, TVP5157, and TVP5156 use 1.1-V, 1.8-V, and 3.3-V power supplies for the analog/digital core and I/O. These devices are available in a 128-pin TQFP package. Table 1-1. Device Options 1.4 Device Name 4-Ch Audio ADC Line-Interleaved Modes TVP5156 No No TVP5157 Yes No TVP5158 Yes Yes Related Products * * * * TVP5154A TVP5150AM1 TVP5146M2 TVP5147M1 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Introduction 9 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 1.5 www.ti.com Trademarks DaVinci, PowerPAD are trademarks of Texas Instruments. Macrovision is a trademark of Macrovision Corporation. Other trademarks are the property of their respective owners. 1.6 Document Conventions Throughout this data manual, several conventions are used to convey information. These conventions are as follows: * To identify a binary number or field, a lower case b follows the numbers. For example: 000b is a 3-bit binary field. * To identify a hexadecimal number or field, a lower case h follows the numbers. For example: 8AFh is a 12-bit hexadecimal field. * All other numbers that appear in this document that do not have either a b or h following the number are assumed to be decimal format. * If the signal or terminal name has a bar above the name (for example, RESETB), then this indicates the logical NOT function. When asserted, this signal is a logic low, 0, or 0b. * RSVD indicates that the referenced item is reserved. 1.7 Ordering Information TA 0C to 70C -40C to 85C (1) (2) (3) 10 PACKAGED DEVICES (1) (2) TQFP 128-Pin PowerPADTM Package PACKAGE OPTION TVP5156PNP Tray TVP5156PNPR Tape and reel TVP5157PNP Tray TVP5157PNPR Tape and reel TVP5158PNP Tray TVP5158PNPR Tape and reel TVP5158IPNP Tray TVP5158IPNPR Tape and reel TVP5158IPNPQ1 (3) Tray TVP5158IPNPRQ1 (3) Tape and reel For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. AEC-Q100 Rev G certified Introduction Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 1.8 SLES243G - JULY 2009 - REVISED APRIL 2013 Functional Block Diagram VIN_1_P VIN_1_N VIN_2_P VIN_2_N 10-Bit ADC Y/C Separation Noise Reduction/ Auto Contrast Scaler 10-Bit ADC Y/C Separation Noise Reduction/ Auto Contrast Scaler DVO_A_[7:0] DVO_B_[7:0] Output Formattor VIN_3_P VIN_3_N VIN_4_P VIN_4_N 10-Bit ADC Y/C Separation Noise Reduction/ Auto Contrast Scaler 10-Bit ADC Y/C Separation Noise Reduction/ Auto Contrast Scaler ARM/Memory Registers DVO_C_[7:0] DVO_D_[7:0] Delay Match and Re-Sync 2 I C Host port Cascade Input 2 IC AIN_1 AIN_2 AIN_3 Audio ADC Decimation Filter and Mixer AIN_4 BCLK_R LRCLK_R 2 I S Encoder SD_R/SD_M SD_CO Audio Cascade Input Figure 1-1. Functional Block Diagram Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Introduction 11 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 2 Terminal Assignments 2.1 Pinout I2CA1 VSS 65 69 68 67 66 DVO_A_5 VDD_3_3 DVO_A_6 DVO_A_7 VDD_1_1 70 DVO_A_2 DVO_A_3 VSS DVO_A_4 74 73 72 71 I2CA0 VSS DVO_A_0 DVO_A_1 VDD_1_1 79 78 77 76 75 VDD_1_1 SD_CO VSS VDD_3_3 83 82 81 80 SD_M SD_R VSS LRCLK_R BCLK_R 88 87 86 85 84 AIN_3 AIN_4 VDDA_1_8 VSS VIN_2_N VDDA_1_8 VDDA_1_8 REXT_2K 113 114 115 116 48 47 46 45 VSSA VSSA VDDA_1_1 VDDA_1_8 117 118 119 120 44 43 42 41 VIN_3_P VIN_3_N 121 122 123 124 40 39 38 37 125 126 127 128 36 35 34 33 Terminal Assignments VSS DVO_B_2 DVO_B_3 VDD_3_3 DVO_B_4 DVO_B_5 VSS DVO_B_6 DVO_B_7 VDD_1_1 OCLK_P OCLK_N/CLKIN VSS I2CA2 VSS DVO_C_0 DVO_C_1 VDD_1_1 DVO_C_2 DVO_C_3 VDD_3_3 DVO_C_4 DVO_C_5 VSS DVO_C_6 DVO_C_7 VDD_1_1 NC VSS DVO_D_0 VDD_1_1 VSS DVO_D_3 DVO_D_2 VDD_3_3 DVO_D_1 DVO_D_7 DVO_D_6 VDD_1_1 DVO_D_5 DVO_D_4 BCLK_CI VDD_1_1 SD_CI VSS VDD_1_1 VSS VDD_3_3 LRCLK_CI T5 VSS T3 T4 SCL SDA VSS T1 VSS INTREQ RESETB 1 2 3 4 VSSA VSSA VIN_4_P VIN_4_N VDDA_1_8 VDAA_3_3 T2 VSSA VDD_1_1 DVO_B_0 DVO_B_1 32 52 51 50 49 27 28 29 30 31 VSSA VIN_2_P 109 110 111 112 VIN_1_N 24 25 26 56 55 54 53 VSSA VSSA VDDA_1_1 VDDA_1_8 VIN_1_P 23 105 106 107 108 VDDA_1_1 18 19 20 21 22 60 59 58 57 14 15 16 17 101 102 103 104 9 10 11 12 13 64 63 62 61 5 6 7 8 97 98 99 100 OSC_OUT VSSA XTAL_IN XTAL_REF XTAL_OUT VDDA_1_8 12 92 91 90 89 96 95 94 93 VSSA AIN_1 AIN_2 128-PIN TQFP PACKAGE (TOP VIEW) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 2-1. Terminal Functions TERMINAL NAME NO. I/O DESCRIPTION Analog Section VIN_1_P 108 I Analog video input for ADC channel 1. VIN_1_N 109 I Common-mode reference input for ADC channel 1. VIN_2_P 112 I Analog video input for ADC channel 2. VIN_2_N 113 I Common-mode reference input for ADC channel 2. VIN_3_P 121 I Analog video input for ADC channel 3. VIN_3_N 122 I Common-mode reference input for ADC channel 3. VIN_4_P 125 I Analog video input for ADC channel 4. VIN_4_N 126 I Common-mode reference input for ADC channels. REXT_2K 116 I External resistor for AFE bias generator. Connect external 1.8k resistor to ground. AIN_1 95 I Analog audio input for channel 1 (No Connect for TVP5156 Only) AIN_2 94 I Analog audio input for channel 2 (No Connect for TVP5156 Only) AIN_3 93 I Analog audio input for channel 3 (No Connect for TVP5156 Only) AIN_4 92 I Analog audio input for channel 4 (No Connect for TVP5156 Only) XTAL_IN 99 I External clock reference input. It may be connected to external oscillator with 1.8-V compatible clock signal or 27.0-MHz crystal oscillator. XTAL_REF 100 G Crystal reference. Connected to analog ground internally. XTAL_OUT 101 O External clock reference output. Not connected if XTAL_IN is driven by an external singleended oscillator. VDDA_1_1 103, 106, 119 P 1.1-V analog supply VDDA_1_8 91, 102, 107, 114, 115, 120, 127 P 1.8-V analog supply Analog Power VDDA_3_3 128 P 3.3-V analog supply for all 4 video channels 96, 98, 104, 105, 110, 111, 117, 118, 123, 124 G Analog ground VSS 1, 6, 12, 14, 20, 26, 33, 38, 47, 49, 55, 61, 65, 73, 79, 82, 87, 90 G Digital ground VDD_1_1 13, 18, 23, 32, 35, 44, 52, 64, 67, 76, 84 P Digital core supply. Connect to 1.1-V digital supply. VDD_3_3 15, 29, 41, 58, 70, 81 P Digital I/O supply. Connect to 3.3-V digital supply. INTREQ 2 O Interrupt request. Interrupt signal to host processor. RESETB 3 I Reset. An active low signal that controls the reset state. SCL 4 I/O I2C serial clock (open drain) SDA 5 I/O I2C serial data (open drain) OSC_OUT 97 O Buffered crystal oscillator output. 1.8-V compatible. OCLK_P 51 O Output data clock+. All four digital video output ports are synchronized to this clock. OCLK_N/CLKIN 50 I/O Output data clock- for 2-Ch time-multiplexed mode or data clock input for 8-Ch video cascade mode 68, 69, 71, 72, 74, 75, 77, 78 O Digital video output data bus. VSSA Digital Power Digital Section DVO_A_[7:0] Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Terminal Assignments 13 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 2-1. Terminal Functions (continued) TERMINAL NAME NO. I/O DESCRIPTION DVO_B_[7:0] 53, 54, 56, 57, 59, 60, 62, 63 O Digital video output data bus. DVO_C_[7:0] 36, 37, 39, 40, 42, 43, 45, 46 I/O Digital video output data bus. In cascade mode, all pins operate as input from another TVP5158 device. DVO_D_[7:0] 21, 22, 24, 25, 27, 28, 30, 31 I/O Digital video output data bus. In cascade mode, all pins operate as input from another TVP5158 device. I2CA0 80 I I2C slave address bit 0 I2CA1 66 I I2C slave address bit 1 I2CA2 48 I I2C slave address bit 2 Digital Audio Section (Not supported on TVP5156) BCLK_R 85 I/O I2S bit clock for recording. Also known as I2S serial clock (SCK). Supports master and slave modes. LRCLK_R 86 I/O I2S left/right clock for recording. Also known as I2S word select (WS). Supports master and slave modes. SD_R 88 O I2S serial data output for recording. SD_M 89 O I2S serial data output for mixed audio or recording. SD_CO 83 O Audio serial data output for cascade mode LRCLK_CI 16 I I2S left/right clock input for cascade mode. Also known as I2S word select (WS). BCLK_CI 17 I I2S bit clock input for cascade mode. Also known as I2S serial clock (SCK). SD_CI 19 I Audio serial data input for cascade mode. 7, 8, 9, 10, 11, 34 NC No Connect Pins T1, T2, T3, T4, T5, NC 14 Terminal Assignments For normal operation, no connect Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 3 Functional Description 3.1 Analog Video Processing and A/D Converters Each video decoder accepts one composite video input and performs video clamping, anti-aliasing filtering, video amplification, A/D conversion, and gain and offset adjustments to center the digitized video signal. Figure 3-1 shows the video analog processing and ADC block diagram. Analog CVBS Input Anti-Aliasing Filter Output to Digital Processing ADC Clamp Reference & Bias Figure 3-1. Video Analog Processing and ADC Block Diagram 3.1.1 Analog Video Input Supports NTSC (J, M, 4.43) and PAL (B, D, G, H, I, M, N, Nc, 60) video standards. Each video decoder channel supports a composite video input with a pseudo-differential pin which improves the noise immunity and analog performance. Each video decoder input should be ac-coupled through a 0.1-F capacitor. The nominal parallel termination resistor before the input to the device is 75 . Each video decoder integrates an anti-aliasing filter to provide good stop-band rejection on the analog video input signal. Figure 3-2 shows the frequency response of the anti-aliasing filter. Frequency Response 5 0 -5 Gain(dB) -10 -15 -20 -25 -30 -35 - 5 10 15 20 25 Frequency (MHz) Figure 3-2. Anti-Aliasing Filter Frequency Response Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 15 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 3.1.2 www.ti.com Analog Video Input Clamping An internal clamping circuit provides dc restoration for all four analog composite video inputs. The dc restoration circuit (sync-tip clamp) restores sync-tip level of the ac-coupled composite video signal to a fixed dc level near the bottom of the A/D converter range. 3.1.3 A/D Converter All ADCs have a resolution of 10 bits and can operate at 27 MSPS. Each A/D channel receives a clock from the on-chip phase-locked loop (PLL) at a nominal frequency of 27 MHz. All ADC reference voltages are generated internally. 3.2 Digital Video Processing Digital Video Processing block receives digitized video signals from the ADCs and performs composite processing and YCbCr signal enhancements. The digital data output can be programmed to two formats: ITU-R BT.656 8-bit 4:2:2 with embedded syncs or 16-bit 4:2:2 with embedded syncs. The circuit also detects pseudo-sync pulses, AGC pulses, and color striping in Macrovision-encoded copy-protected material. 3.2.1 2x Decimation Filter All input signals are over-sampled by a factor of 2 (by 27-MHz clock). The A/D outputs initially pass through decimation filters that reduce the data rate to 1x the pixel rate. The decimation filter is a half-band filter. Over-sampling and decimation filtering can effectively increase the overall signal-to-noise ratio by 3 dB. 3.2.2 Automatic Gain Control The automatic gain control (AGC) can be enabled and can adjust the signal amplitude controlled by 14-bit digital gain stage after the ADC. The AGC algorithms can use up to four amplitude references: sync height, color burst amplitude, composite peak, and luma peak. The specific amplitude references being used by the AGC algorithms can be controlled using the AGC white peak processing register located at subaddress 2Dh. The gain increment speed and gain increment delay can be controlled using the AGC increment speed register located at subaddress 29h and the AGC increment delay register located at subaddress 2Ah. The gain decrement speed and gain decrement delay can be controlled using the AGC decrement speed register located at subaddress 2Bh and the AGC decrement delay register located at subaddress 2Ch. 3.2.3 Composite Processor This Composite Processor circuit receives a digitized composite signal from the ADCs and performs sync and Y/C separation, chroma demodulation for PAL/NTSC, and YUV signal enhancements. The slice levels of the sync separator are adaptive. The slice levels continually adapt to changes in the back-porch and sync-tip levels. The 10-bit composite video is multiplied by the sub carrier signals in the quadrature demodulator to generate U and V color difference signals. The U and V signals are then sent to low-pass filters to achieve the desired bandwidth. An adaptive 5-line comb filter separates UV from Y based on the unique property of color phase shifts from line to line. The chroma is re-modulated through a quadrature modulator and subtracted from line-delayed composite video to generate luma. This form of Y/C separation is completely complementary, thus there is no loss of information. However, in some applications, it is desirable to limit the U/V bandwidth to avoid crosstalk. In that case, notch filters can be turned on. To accommodate some viewing preferences, a peaking filter is also available in the luma path. Contrast, brightness, sharpness, hue, and saturation controls are programmable through the I2C host port. Figure 3-3 shows the block diagram of Composite Processor. 16 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com CVBS SLES243G - JULY 2009 - REVISED APRIL 2013 Line Delay Delay Peaking Y NTSC/PAL Remodulation Y Contrast Notch Notch Filter Filter Brightness Saturation Adjust Cr Color LPF 2 Cb Burst Accumulator (U) 5 Line Adaptive CVBS NTSC/PAL Demodulation Color LPF 2 Burst Accumulator (V) Comb Filter Notch Filter Delay Notch Filter Delay U V Figure 3-3. Composite Processor Block Diagram 3.2.3.1 Color Low-Pass Filter High filter bandwidth preserves sharp color transitions and produces crisp color boundaries. However, for nonstandard video sources that have asymmetrical U and V side bands, it is desirable to limit the filter bandwidth to avoid UV crosstalk. The color low-pass filter bandwidth is programmable to enable one of the three notch filters. Figure 3-4 and Figure 3-5 represent the frequency responses of the wideband color low-pass filters. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 17 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Figure 3-4. Color Low-Pass Filter Frequency Response Figure 3-5. Color Low-Pass Filter with Filter Characteristics, NTSC/PAL ITU-R BT.601 Sampling 3.2.3.2 Y/C Separation Y/C separation can be done using adaptive 5-line (5-H delay) comb filters or a chroma trap filter. The comb filter can be selectively bypassed in the luma or chroma path. If the comb filter is bypassed in the luma path, then chroma trap filters are used which are shown in Figure 3-6 and Figure 3-7. The TI patented adaptive comb filter algorithm reduces artifacts such as hanging dots at color boundaries. It detects and properly handles false colors in high-frequency luminance images such as a multiburst pattern or circle pattern. 18 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Figure 3-6. Chroma Trap Filter Frequency Response, NTSC ITU-R BT.601 Sampling Figure 3-7. Chroma Trap Filter Frequency Response, PAL ITU-R BT.601 Sampling 3.2.4 Luminance Processing The digitized composite video signal passes through either a luminance comb filter or a chroma trap filter, either of which removes chrominance information from the composite signal to generate a luminance signal. The luminance signal is then fed into the input of a peaking circuit. Figure 3-8 shows the basic functions of the luminance data path. A peaking filter (edge enhancer) amplifies high-frequency components of the luminance signal. Figure 3-9 shows the characteristics of the peaking filter at four different gain settings that are user-programmable via the I2C interface. Gain IN Peak Detector Bandpass Filter x Peaking Filter Delay + OUT Figure 3-8. Luminance Edge-Enhancer Peaking Block Diagram Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 19 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Figure 3-9. Peaking Filter Response, NTSC/PAL ITU-R BT.601 Sampling 3.3 AVID Cropping AVID or active video cropping provides a means to decrease the amount of video data output. This is accomplished by horizontally blanking a number of AVID pulses and by vertically blanking a number of lines per frame. Horizontal cropping can be enabled/disabled using bit-6 of address B1h. When line cropping is enabled, active video is reduced from 720 to 704 pixels for unscaled video and from 360 to 352 pixels for down-scaled video. When line cropping is enabled, the TVP5158 crops an equal amount from both the start and end of active video. Register 8Ch can be used to delay both the start and end of active video. It allows selecting which 704 pixels out of 720 are actually being used for active video when line cropping is enabled. 3.4 Embedded Syncs Standards with embedded syncs insert SAV and EAV codes into the data stream at the beginning and end of horizontal blanking. These codes contain the V and F bits which also define vertical timing. F and V change on EAV. Table 3-1 gives the format of the SAV and EAV codes. H equals 1 always indicates EAV. H equals 0 always indicates SAV. The alignment of V and F to the line and field counter varies depending on the standard. Please refer to ITU-R BT.656 for more information on embedded syncs. The P bits are protection bits: P3 = V xor H P2 = F xor H P1 = F xor V P0 = F xor V xor H Table 3-1. EAV and SAV Sequence 8-BIT DATA D7 (MSB) D6 D5 D4 D3 D2 D1 D0 Preamble 1 1 1 1 1 1 1 1 Preamble 0 0 0 0 0 0 0 0 Preamble 0 0 0 0 0 0 0 0 Status word 1 F V H P3 P2 P1 P0 20 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 3.5 SLES243G - JULY 2009 - REVISED APRIL 2013 Scaler Each video decoder has an independent horizontal and vertical scaler, which supports D1 to half-D1 or CIF conversion. Table 3-2 gives the details of video resolution including un-cropped and cropped. Table 33 shows the video resolutions converted by the scaler. Table 3-2. Standard Video Resolutions Uncropped Format Cropped NTSC PAL NTSC PAL D1 720 x 480 720 x 576 704 x 480 704 x 576 Half-D1 360 x 480 360 x 576 352 x 480 352 x 576 CIF 360 x 240 360 x 288 352 x 240 352 x 288 Table 3-3. Video Resolutions Converted by the Scaler Scaling Ratio D1 D1 to Half-D1 D1 to CIF 3.6 Format Horizontal Scaling Vertical Scaling Total Pixel Active Output Resolution NTSC 1:1 1:1 858 x 525 720 x 480 PAL 1:1 1:1 864 x 625 720 x 576 NTSC 2:1 1:1 429 x 525 360 x 480 PAL 2:1 1:1 432 x 625 360 x 576 NTSC 2:1 2:1 429 x 262 360 x 240 PAL 2:1 2:1 432 x 312 360 x 288 Noise Reduction A video sequence shot under low light condition, which is typical of video surveillance applications, can contain lots of noise. Human eyes are very sensitive to oscillating signals, the visual quality degenerates significantly even when the noise level is small. Each video decoder uses a TI proprietary spatial filter to reduce video noise. For each frame of image, the video noise filter (VNF) produces an estimate of the Y/U/V noise. Based on the noise estimates, the firmware adjusts the threshold for Y/U/V filtering. The filtered video shows improved video quality and lower compression bit-rate. The firmware can also utilize the Y/U/V noise estimates to make decisions to disable color if the video noise is determined to be too high. This "color killer" decision bit can be used to control another module that implements the color killing function. The Noise Reduction can be controlled using I2C registers from 5Ch to 5Fh. This module can also be set to bypass mode by I2C register 5Dh (Bit 0). 3.7 Auto Contrast The Auto Contrast (AC) module can adjust the picture brightness automatically or manually (user programmable) for better image quality. The goal of AC processing is to make the dark area brighter and high-light area dimmer. This makes it possible for the viewer to see details hidden in the shadows. It also prevents loss of details in the washed-out high light area. The AC processing is mostly for video surveillance applications. For each frame of image, the auto contrast module collects the statistics of its Y (luminance) values. The AC algorithm implemented in the firmware processes the statistics and generates a look-up table (LUT). This LUT is used to map each incoming pixel Y value to an output pixel Y value for the next frame of image. The LUT is updated during the blanking period between two frames. The Auto Contrast Mode can be controlled by using I2C registers 0Fh. This module can also be set to disable mode by I2C register 0Fh (Bit 1:0). Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 21 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 3.8 www.ti.com Output Formatter The output formatter is responsible for generating the output digital video stream. Table 3-4 provides a summary of line frequencies, data rates, and pixel counts for different input standards. TVP5158 supports non-interleaved output mode, pixel-interleaved output mode and line-interleaved output mode. The noninterleaved mode is similar to the TVP5154A device, except that a single fixed clock output is used. In the interleaved modes, the video output data from multiple decoder channels are multiplexed together and then output to a single 8-bit or 16-bit port. The video output data from selected channels can be interleaved on a pixel or line basis. Table 3-4. Summary of Line Frequencies, Data Rates and Pixel Counts for Different Standards Standards (ITU-R BT.601) Pixels per Line Active Pixels per Line Lines per Frame Pixel Frequency (MHz) Color Subcarrier Frequency (MHz) Horizontal Line Rate (kHz) NTSC-J, M 858 720 525 13.5 3.579545 15.73426 NTSC-4.43 858 720 525 13.5 4.43361875 15.73426 PAL-M 858 720 525 13.5 3.57561149 15.73426 PAL-60 858 720 525 13.5 4.43361875 15.73426 PAL-B, D, G, H, I 864 720 625 13.5 4.43361875 15.625 PAL-N 864 720 625 13.5 4.43361875 15.625 PAL-Nc 864 720 625 13.5 3.58205625 15.625 3.8.1 Non-Interleaved Mode In the non-interleaved mode, the YCbCr digital output is programmed as 8-bit ITU-R BT.656 parallel interface standard. Depending on which output mode is selected, the output for each channel can be unscaled data or scaled data. Also each video output port can be selected to output the video data from any 1 of 4 video decoders. Table 3-5 shows the detailed information about non-interleaved mode. Table 3-5. Output Ports Configuration for Non-Interleaved Mode Video Output Format Cascade Stage I2C Address: B0h OCLK (MHz) Port A Port B Port C Port D 1-Ch D1 n/a 00h 27 Any 1 of 4 Ch Any 1 of 4 Ch Any 1 of 4 Ch Any 1 of 4 Ch 1-Ch Half-D1 n/a 02h 27 Any 1 of 4 Ch Any 1 of 4 Ch Any 1 of 4 Ch Any 1 of 4 Ch 1-Ch CIF n/a 03h 27 Any 1 of 4 Ch Any 1 of 4 Ch Any 1 of 4 Ch Any 1 of 4 Ch 3.8.2 Pixel-Interleaved Mode Each video decoder supports multiplexing two or four channels ITU-R BT.656 format data together on a pixel basis. The output from each video decoder channel is still ITU-R BT.656 format. After the processing in output formatter, two or four channels video data has been interleaved together by strictly one pixel from each channel. The pixel-interleaved mode is dedicated for the backend chip which has limited video input ports. Table 36 gives the output port configuration for pixel-interleaved mode. 22 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 3-6. Output Ports Configuration for Pixel-Interleaved Mode Video Output Format Cascade Stage I2C Address: B0h 2-Ch D1 n/a 4-Ch D1 n/a 4-Ch Half-D1 4-Ch CIF 3.8.2.1 OCLK (MHz) Port A Port B Port C Port D 50h 54 Any 2 of 4 Ch Any 2 of 4 Ch Hi-Z Hi-Z 60h 108 All 4 Ch Hi-Z Hi-Z Hi-Z n/a 62h 54 All 4 Ch Hi-Z Hi-Z Hi-Z n/a 63h 54 All 4 Ch Hi-Z Hi-Z Hi-Z 2-Ch Pixel-Interleaved Mode In 2-Ch pixel-interleaved mode, the video output data with D1 resolution from two video channels is multiplexed pixel by pixel at 54 MHz. The output ports DVO_A and DVO_B are used in this mode. The output clocks OCLK_P and OCLK_N are synchronized with each channel so that the backend chip can de-multiplexed each video channel data easily. The video output from each channel is compatible with ITU-R BT.656 format. Figure 3-10 shows the timing diagram for 2-Ch pixel-interleaved mode. CLK_P (27MHz) CLK_N (27MHz) CH1_D FF CH2_D 00 00 Cb20 DVO_A_ [7:0] FF Cb20 Y20 00 Y20 Cr20 00 Cb0 XY Cr20 XY Y0 Y21 Cb22 Y21 Cb0 Cb22 Cr0 Y22 Y0 Y22 Y1 Cr22 Cr0 Cr22 Y1 Cb2 Y2 Y23 Cb24 Y23 Cb2 Cb24 Cr2 Y24 Y2 Y24 Y3 Cr24 Cr2 Cr24 Y25 Y3 Y25 Figure 3-10. 2-Ch Pixel-Interleaved Mode Timing Diagram 3.8.2.2 4-Ch Pixel-Interleaved Mode In 4-Ch pixel-interleaved mode, the video output data with D1 resolution from four video channels is multiplexed pixel by pixel at 108 MHz. The output DVO_A is used in this mode. The output clock OCLK_P is synchronized with all four channels data. Each channel video data is compatible with ITU-R BT.656 format. Figure 3-11 shows the timing diagram for 4-Ch pixel-interleaved mode. CLK (108MHz) CH1_D FF CH2_D Cb20 CH3_D Y 20 Cr92 FF Cb20 Cr50 Cr92 Y 20 Y51 Cb0 Y93 Y52 Cb94 00 Y0 Cb22 Y21 Cb52 Y93 00 XY Cr20 Y51 Cr50 CH4_D DVO_A_ [7:0] 00 00 Cr20 Cb52 Cb94 XY Y21 Y52 Y22 Y53 Cr52 Y94 Cr94 Y94 Cb0 Cb22 Cr52 Cr94 Y95 Y0 Y22 Y53 Y95 Figure 3-11. 4-Ch Pixel-Interleaved Mode Timing Diagram Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 23 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com In 4-Ch pixel-interleaved mode, TVP5158 also supports Half-D1 and CIF format data multiplexed at 54 MHz. The output DVO_A is used in this mode. The output clock OCLK_P is synchronized with all four channels data. 3.8.2.3 Metadata Insertion for Non-Interleave Mode and Pixel-Interleaved Mode In non-interleaved mode and pixel-interleaved mode, the video detection status (VDET) has also been inserted in MSB of SAV/EAV control byte. Table 3-7 shows VDET status insertion in SAV/EAV codes. Table 3-7. VDET Statues Insertion in SAV/EAV Codes CONDITION FVH VALUE SAV/EAV CODE SEQUENCE 4th FIELD V TIME H TIME F V H 1st 2nd 3rd 1 Active SAV 0 0 0 FFh 00h 00h 80h 00h 1 Active EAV 0 0 1 FFh 00h 00h 9Dh 1Dh 1 Blank SAV 0 1 0 FFh 00h 00h ABh 2Bh 1 Blank EAV 0 1 1 FFh 00h 00h B6h 36h 2 Active SAV 1 0 0 FFh 00h 00h C7h 47h 2 Active EAV 1 0 1 FFh 00h 00h DAh 5Ah 2 Blank SAV 1 1 0 FFh 00h 00h ECh 6Ch 2 Blank EAV 1 1 1 FFh 00h 00h F1h 71h VDET = 1 VDET = 0 In the pixel-interleaved mode, Channel ID is inserted in the horizontal blanking code as Table 3-8. The backend chip can easily identify the video data from which video decoder channel by inserted Channel ID. Table 3-8. Channel ID Insertion in Horizontal Blanking Code H BLANKING CODE WITH CHANNEL ID CHANNEL Y Cb Cr Ch1 10h 80h 80h Ch2 11h 81h 81h Ch3 12h 82h 82h Ch4 13h 83h 83h In the pixel-interleaved mode, Channel ID can also be inserted in 4 LSBs of SAV/EAV control byte replacing protection bits as Table 3-9. Table 3-9. Channel ID Insertion in SAV/EAV Code Sequence CONDITION FVH VALUE SAV/EAV CODE SEQUENCE 4th FIELD V TIME H TIME F V H 1st 2nd 3rd Ch1 Ch2 Ch3 Ch4 1 Active SAV 0 0 0 FFh 00h 00h 80h 81h 82h 83h 1 Active EAV 0 0 1 FFh 00h 00h 90h 91h 92h 93h 1 Blank SAV 0 1 0 FFh 00h 00h A0h A1h A2h A3h 1 Blank EAV 0 1 1 FFh 00h 00h B0h B1h B2h B3h 2 Active SAV 1 0 0 FFh 00h 00h C0h C1h C2h C3h 2 Active EAV 1 0 1 FFh 00h 00h D0h D1h D2h D3h 2 Blank SAV 1 1 0 FFh 00h 00h E0h E1h E2h E3h 2 Blank EAV 1 1 1 FFh 00h 00h F0h F1h F2h F3h 24 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 3.8.3 SLES243G - JULY 2009 - REVISED APRIL 2013 Line-Interleaved Mode Support (TVP5158 only) The TVP5158 supports 2-Ch, 4-Ch, and 8-Ch line-interleaved modes. In the line-interleaved mode, the video channels are multiplexed together on a line-by-line basis. Compared to the pixel-interleaved mode, the line-interleaved mode significantly reduces the code complexity and MIPS consumption of the backend processor. The 8-Ch modes require connecting two TVP5158 devices together using a video cascade interface (see Section 3.8.3.3). The TVP5158 also supports different image resolutions (for example, D1, Half-D1, and CIF) in the line-interleaved mode. All supported line-interleaved modes are shown in Table 310. Table 3-10. Output Ports Configuration for Line-Interleaved Mode Cascade Stage I2C Address: B0h OCLK (MHz) Port A Port B Port C Port D 2-Ch D1 n/a 90h 54 Any 2 of 4 Ch Any 2 of 4 Ch Hi-Z Hi-Z 2-Ch Half-D1 n/a 92h 27 Any 2 of 4 Ch Any 2 of 4 Ch Hi-Z Hi-Z 3-Ch D1 n/a 80h 81/108 Any 3 of 4 Ch Hi-Z Hi-Z Hi-Z 4-Ch D1 n/a A0h 108 All 4 Ch Hi-Z Hi-Z Hi-Z 4-Ch Half-D1 n/a A2h 54 All 4 Ch Hi-Z Hi-Z Hi-Z 4-Ch CIF n/a A3h 27 All 4 Ch Hi-Z Hi-Z Hi-Z All 4 Ch (C data) Hi-Z Hi-Z Video Output Format 4-Ch D1 (16-bit) n/a A8h 54 All 4 Ch (Y data) 4-Ch Half-D1 (16-bit) n/a AAh 27 All 4 Ch (Y data) All 4 Ch (C data) Hi-Z Hi-Z 1st 82h 81/108 6-Ch Half-D1 Output Hi-Z Hi-Z 2-Ch Half-D1 Input 2nd 86h 27 2-Ch Half-D1 Output Hi-Z Hi-Z Hi-Z 1st B2h 108 8-Ch Half-D1 Output Hi-Z Hi-Z 4-Ch Half-D1 Input 2nd B6h 54 4-Ch Half-D1 Output Hi-Z Hi-Z Hi-Z 1st B3h 54 8-Ch CIF Output Hi-Z Hi-Z 4-Ch CIF Input 2nd B7h 27 4-Ch CIF Output Hi-Z Hi-Z Hi-Z 4-Ch Half-D1 + 1-Ch D1 n/a E2h 81/108 4 Ch Half-D1 + Any 1 of 4 D1 Hi-Z Hi-Z Hi-Z 4-Ch CIF + 1-Ch D1 n/a E3h 54 4-Ch CIF + Any 1 of 4 D1 Hi-Z Hi-Z Hi-Z 1st C2h 108 6-Ch Half-D1 + Any 1 of 8 D1 Hi-Z 1-Ch D1 Input 2-Ch Half-D1 Input 2nd C6h 27 2-Ch Half-D1 Output 1-Ch D1 Output Hi-Z Hi-Z 1st F3h 81/108 8-Ch CIF + Any 1 of 8 D1 Hi-Z 2nd F7h 27 4-Ch CIF Output 1-Ch D1 Output 6-Ch Half-D1 8-Ch Half-D1 8-Ch CIF 6-Ch Half-D1 + 1-Ch D1 8-Ch CIF + 1-Ch D1 3.8.3.1 1-Ch D1 Input 4-Ch CIF Input Hi-Z Hi-Z 2-Ch Line-Interleaved Mode TVP5158 supports 2-Ch line-interleaved mode at 54 MHz. The video output data with D1 resolution from any two video channels is multiplexed together on a line basis. The output ports DVO_A and DVO_B are used in this mode. The output clock OCLK_P is synchronized with both output ports. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 25 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 3.8.3.2 www.ti.com 4-Ch Line-Interleaved Mode In 4-Ch line-interleaved mode, the video output data from all 4 channels is multiplexed together on a line basis. The output resolution of video data can be D1, Half-D1 or CIF. For D1 and Half-D1 output resolutions, the video output port can be configured to support 8-bit BT.656 or 16-Bit YCbCr 4:2:2 data with embedded sync. Port DVO_A is used for 8-bit output. Ports DVO_A and DVO_B are used for 16-Bit output. The output clock OCLK_P is synchronized with all four output ports. TVP5158 supports multiplexing 4-Ch CIF and 1-Ch D1 data together and then output through DVO_A at 54 MHz. 1-Ch D1 can be from any one of 4 video channels. In typical surveillance applications, CIF resolution is used for recording and D1 resolution is used for video preview. TVP5158 also supports multiplexing 4-Ch Half-D1 and 1-Ch D1 data together and then output through DVO_A at 108 MHz. The backend chip can use Half-D1 to generate CIF format by dropped one field. Pleas note that the line-interleaved mode does NOT strictly output one line from each decoder channel sequentially. The order of multiplexed the video line data is based on the availability of video output data from each decoder channel. Therefore, it is possible to output two consecutive lines from the same decoder channel or to skip one decoder channel output. 3.8.3.3 8-Ch Line-Interleaved Mode Two TVP5158 devices can be cascade connected and work as single 8-Ch video decoder. In cascade mode, the port DVO_C and DVO_D of master TVP5158 (first stage) can be configured as the video input interface. The DVO_A and DVO_B of master TVP5158 are configured as the output interface for two devices. This mode is dedicated for the backend chip with extremely limited input ports. In the video cascade mode, the open-drain interrupt request (INTREQ) outputs from the first and second stages can be combined using a wired-OR connection. Typical applications with cascade mode show in the following diagrams. Figure 3-12 shows the Cascade Connection for 16-Ch CIF Recoding and Multi-Ch CIF Preview. Figure 3-13 shows the Cascade Connection for 16-Ch CIF Recoding and Multi-Ch Half-D1 Preview. Figure 3-14 shows the Cascade Connection for 16-Ch CIF Recoding and 2-Ch D1/Multi-Ch CIF Preview. 26 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 VIN_1 VIN_2 VIN_3 VIN_4 DVO_A_[7:0] OCLK_P TVP5158 8-C h CIF 8Bit@54MH z VPIF_A DVO_D_[7:0] OCLKN/CLKIN I2 C VIN_1 VIN_2 VIN_3 TVP5158 VIN_4 VIN_1 VIN_2 H.264 DVO_A_[7:0] OCLK_P DVO_A_[7:0] OCLK_P TVP5158 4-C h CIF 8Bit@ 27MHz 8-C h CIF 16 -Ch CIF Recording DM6467 DaVinci HD VPIF_B 8Bit@54MH z Multi-Ch CIF Preview VIN_3 VIN_4 DVO _D_[7:0] OCLKN/CLKIN I2 C VIN_1 VIN_2 VIN_3 DVO_A_[7:0] OCLK_P TVP5158 VIN_4 4-C h CIF 8Bit@ 27MHz Figure 3-12. Cascade Connection for 16-Ch CIF Recoding and Multi-Ch CIF Preview VIN_1 VIN_2 VIN_3 VIN_4 DVO_A_[7:0] OCLK_P TVP5158 8-Ch Half-D1 8Bit@108 MHz VPIF _A DVO_D_[7:0] OCLKN/CLKIN I2C VIN_1 VIN_2 VIN_3 H.264 DVO_A_[7:0] OCLK_P TVP5158 VIN_4 VIN_1 VIN_2 VIN_3 VIN_4 TVP5158 DVO_A_[7:0] OCLK_P 16 -Ch CIF R ecording 4-Ch H alf-D1 8Bit@ 54MHz 8-Ch Half-D1 8Bit@ 108MHz DM6467 DaVinci HD VPIF _B DVO_D_[7:0] OCLKN/CLKIN Multi-Ch H alf-D1 Preview I2C VIN_1 VIN_2 VIN_3 DVO_A_[7:0] OCLK_P TVP5158 VIN_4 4-Ch H alf-D1 8Bit@ 54MHz Figure 3-13. Cascade Connection for 16-Ch CIF Recoding and Multi-Ch Half-D1 Preview Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 27 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 VIN_1 VIN_2 VIN_3 VIN_4 www.ti.com DVO_A_[7:0] OCLK_P TVP5158 8-Ch CIF + 1 -Ch D 1 VPIF_A 8Bit@108MHz DVO _C_[7:0] DVO_D_[7:0] OCLKN/CLKIN I2C VIN_1 VIN_2 VIN_3 DVO_A_[7:0] OCLK_P 4-C h CIF 8 Bit@ 27 MHz DVO_B _[7:0] TVP5158 H.264 1-Ch D1 8Bit@27MH z 16 -C h CIF Recording VIN_4 VIN_1 VIN_2 VIN_3 VIN_4 DM6467 DaVinci HD DVO_A_[7:0] OCLK_P TVP5158 8-C h C IF + 1 -C h D 1 2 -Ch D1/Multi-Ch CIF Preview VPIF_B 8Bit@108MHz DVO _C_[7:0] DVO_D_[7:0] OCLKN/CLKIN I2C VIN_1 VIN_2 VIN_3 DVO_A_[7:0] OCLK_P 4 -C h CIF 8 Bit@ 27 MHz DVO_B _[7:0] TVP 5158 1 -Ch D1 8Bit@27MH z VIN_4 Figure 3-14. Cascade Connection for 16-Ch CIF Recoding and 2-Ch D1/Multi-Ch CIF Preview 3.8.3.4 Hybrid Modes The TVP5158 also supports multiplexing both scaled and unscaled data streams in the line-interleaved mode. In these hybrid modes (4-Ch Half-D1 + 1-Ch D1, 4-Ch CIF + 1-Ch D1, and 8-Ch CIF + 1-Ch D1), the D1 line is split into two equal-length half lines and then multiplexed with the other CIF lines. Therefore, all video data is actually multiplexed by CIF line length. In these hybrid modes, the line cropping mode affects both the scaled and unscaled data streams. The line cropping mode is controlled by bit 6 of I2C register B1h. 3.8.3.5 Metadata Insertion for Line-Interleaved Mode In the line-interleaved mode, the video data is rearranged on a line-by-line basis. There can be no guaranteed output line order, because all analog video inputs are not synchronized. To be compatible with general backend BT.656 decoder, the video data is encapsulated on TVP5158 output so that all input data is preserved and output data is understandable to a BT.656 decoder. To prevent confusion over image line count and vertical blanking appearing haphazardly, SAV/EAV codes have FID and V data stripped and replaced with FID = V = 0. Because vertical blanking in the input is being masked out, artificial vertical sync is inserted every encapsulated frame (a.k.a., super frame). Thus, to the unaware BT.656 decoder, the stream appears to be progressive data with two lines of vertical blanking. The default super-frame format and timing for each line-interleaved output format is shown in Table 3-11. 28 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 3-11. Default Super-Frame Format and Timing Video Output Formats OCLK (MHz) EAV (bytes) Cropping Enable n/a n/a 1 0 n/a 1 0 n/a n/a 2-Ch D1 54 4 280 248 4 1416 1448 1704 1052 2-Ch Half-D1 27 4 128 112 4 712 728 848 1052 108 4 848 816 4 1416 1448 2272 1577 81 4 280 248 4 1416 1448 1704 1577 4-Ch D1 108 4 280 248 4 1416 1448 1704 2102 4-Ch Half-D1 54 4 128 112 4 712 728 848 2102 4-Ch CIF 27 4 128 112 4 712 728 848 1054 4-Ch D1 (16 bit) 54 4 136 120 4 708 724 852 2102 3-Ch D1 (1) 4-Ch Half-D1 (16 bit) SAV (bytes) EAV2SAV (bytes) SF HSIZE (bytes) SAV2EAV (bytes) SF VSIZE (bytes) 27 4 60 52 4 356 364 424 2102 108 4 416 400 4 712 728 1136 3152 81 4 128 112 4 712 728 848 3152 108 4 128 112 4 712 728 848 4095 8-Ch CIF 54 4 128 1121 4 712 728 848 2106 6-Ch Half-D1 + 1-Ch D1 108 4 128 112 4 712 728 848 4095 108 4 416 400 4 712 728 1136 3152 81 4 128 112 4 712 728 848 3152 54 4 128 112 4 712 728 848 2104 108 4 416 400 4 712 728 1136 3156 81 4 128 112 4 712 728 848 3156 6-Ch Half-D1 (1) 8-Ch Half-D1 4-Ch Half-D1 + 1-Ch D1 (1) 4-Ch CIF + 1-Ch D1 8-Ch CIF + 1-Ch D1 (1) (1) The output clock frequency for these output formats can be selected using bit 6 of I2C register B2h. The default clock frequency is 108 MHz. 4-Byte Start Code (SC3:SC0) is inserted immediately after SAV code for encapsulated frame. Figure 3-15 and Figure 3-16 show the start code details. Horizontal Active Period (SAV2EAV) Horizontal Blanking Interval EAV FFh 00h SAV EAV2SAV 00h FFh XYh 00h 00h XYh SC3 SC3 SC2 SC2 SC1 SC1 SC0 SC0 Cb Y Cr Y Start code for channel data SAV for encapsulated frame 64 clock cycles (fixed) EAV for encapsulated frame Channel Data Start Code Figure 3-15. Start Code in 8-Bit BT.656 Interface Horizontal Blanking Interval EAV Horizontal Active Period (SAV2EAV) EAV2SAV SAV Start Code Channel Data FFh 00h 00h XYh FFh 00h 00h XYh SC3 SC2 SC1 SC0 FFh 00h 00h XYh FFh 00h 00h XYh SC3 SC2 SC1 SC0 Y Y Cb EAV for encapsulated frame 64 clock cycles (fixed) SAV for encapsulated frame Cr Y Cb Y Cr Start code for channel data Figure 3-16. Start Code in 16-Bit YCbCr 4:2:2 Interface Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 29 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 3-12 and Table 3-13 show the bit assignment and field definition of 4-Byte start code for Active Video Line. Table 3-12. Bit Assignment of 4-Byte Start Code for Active Video Line BYTE 7 6 5 SC[3] 1 BOP EOP SC[2] 0 BOL EOL SC[1] ~LD_ID[6] SC[0] 1 4 3 2 RSVD 1 VCS_ID VDET 0 CH_ID[1:0] RSVD LN_ID[8:7] LN_ID[6:0] F V H P3 P2 P1 P0 Table 3-13. Bit Field Definition of 4-Byte Start Code for Active Video Line BIT NAME 31 1 FUNCTION Always set to 1. Active-high beginning of period flag. Set high for first line of both active video and vertical blanking interval. In split-line mode, the BOP bit is the same for both halves of the same line. 30 BOP 0: Not BOP 1: BOP Active-high end of period flag. Set high for last line of both active video and vertical blanking interval. In splitline mode, the EOP bit is the same for both halves of the same line. 29 EOP [28:27] RSVD 0: Not EOP 1: EOP Reserved Video cascade stage ID. Set to 0 for normal operation. In cascade mode, the back-end device (for example, TMS320DM6467) interfaces to the first stage. 26 VCS_ID 0: First stage (channels 1 to 4) 1: Second stage (channels 5 to 8) 2-bit Channel ID. Video decoder channel number. 00: Channel 1 [25:24] CH_ID[1:0] 01: Channel 2 10: Channel 3 11: Channel 4 23 0 22 BOL Always set to 0. Active-high beginning of line flag. Used in split-line mode which may be required for hybrid formats (e.g. 1Ch D1 + 8-Ch CIF). Set high when the current encapsulated line of channel data includes the beginning of a video line. 0: BOL not included (2nd half of split line) 1: BOL included (1st half of split line or full line) Active-high end of line flag. Used in split-line mode which may be required for hybrid formats (e.g. 1-Ch D1 + 8-Ch CIF). Set high when the current line of channel data includes the end of a video line. 21 EOL 0: EOL not included (1st half of split line) 1: EOL included (2nd half of split line or full line) Active-high video detection status 20 VDET 0: Video not detected 1: Video detected 30 [19:18] RSVD [17:16] LN_ID[8:7] Two MSBs of 9-bit Line ID, active video line number. Line counter resets to 000h at beginning of active video (that is, resets once per field). During the vertical blanking interval, the line counter may either continue counting or hold the terminal count determined at the end of active video. 15 ~LN_ID[6] Always set to the complement of bit 14 (LN_ID[6]). [14:8] LN_ID[6:0] Seven LSBs of 9-bit Line ID, active video line number. Line counter resets to 000h at beginning of active video (that is, resets once per field). During the vertical blanking interval, the line counter may either continue counting or hold the terminal count determined at the end of active video. Functional Description Reserved Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 3-13. Bit Field Definition of 4-Byte Start Code for Active Video Line (continued) BIT NAME 7 1 6 F FUNCTION Always set to 1. F-bit 0: First field of frame 1: Second field of frame V-bit 5 V 0: when not in vertical blanking 1: during vertical blanking H-bit. Always set to 0. 4 H 0: SAV 3 P3 P3 = V XOR H, Protection bits used for error detection/correction 2 P2 P2 = F XOR H, Protection bits used for error detection/correction 1 P1 P1 = F XOR V, Protection bits used for error detection/correction 0 P0 P0 = F XOR V XOR H, Protection bits used for error detection/correction 1: EAV (never used) NOTE For line-interleaved output mode, if none of video decoder channels has the data ready at a given time, TVP5158 outputs the dummy line until any one of video decoder channels is ready to output a line. The backend chip needs to keep only the active video line and ignore the dummy line. The start code of the dummy line is different with active video line. Table 3-14 shows the bit assignment and field definition of 4-Byte start code for the Dummy Line. Table 3-14. Bit Assignment of 4-Byte Start Code for the Dummy Line BYTE 7 6 5 4 3 2 1 0 SC[3] 0 0 0 0 0 0 0 1 SC[2] 0 0 0 0 0 0 0 1 SC[1] 0 0 0 0 0 0 0 1 SC[0] 0 0 0 0 0 0 0 1 NOTE The Dummy Line can be distinguished from active video line by looking at the MSB of byte SC[0]. 3.9 Audio Sub-System (TVP5157 and TVP5158 Only) The audio sub-system integrates a 4-Ch audio analog-to-digital converter, digital processing, and I2S encoder. TVP5158 audio sub-system supports 4-Ch mono analog audio input and standard/multiple I2S output. TVP5158 also supports audio cascade connection up to four devices cascade connected for 16-Ch audio input. 3.9.1 Features * Four mono analog audio input channels - Requires external passive attenuator to support 2.828-Vpp analog audio input Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 31 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 * * * * * * * * 3.9.2 www.ti.com Programmable Gain Amplifier (PGA) - Gain range: -12 ~ 0 dB, Gain Step: 1.5 dB Integrated Anti-Aliasing Filter (AAF) 10-Bit Analog-to-Digital Converter Integrates Audio High-pass filter to eliminate low frequency hum Digital serial audio interface - 16-Bit Linear PCM, 8-Bit A-Law and 8-Bit -Law Data - I2S or DSP Format - Master and Slave mode operation - Up to 16 slots TDM output - 64 fs or 256 fs system clock Sampling Rate : 16 kHz, 8 kHz Audio Cascade connection - Up to 4 cascaded devices - I2S format - 256 fs system clock Audio Mixing Output - Audio ADC has one register to set mix ratio - The Mixing output pin SD_M can also be used for recording. Combined with the recording output pin SD_R, two I2S bit-streams can be output simultaneously. Audio Sub-System Functional Diagram Figure 3-17. Audio Sub-System Functional Diagram 32 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 3.9.3 SLES243G - JULY 2009 - REVISED APRIL 2013 Serial Audio Interface The timing for the TVP5158 serial audio interface is shown in Figure 3-18. The TVP5158 audio data output (SD_R) and frame sync pulse (LRCLK) are aligned with the falling edge of the bit clock (BCLK). The TVP5158 audio data is delayed one BCLK cycles from the falling edge of the frame sync pulse. In the DSP mode, the TVP5158 frame sync pulse is high for only one BCLK cycle. 1/fs LRCLK_R BCLK_R SD_R LSB MSB LSB MSB Data 1 LSB Data 2 2 (a) I S Format 1/fs LRCLK_R BCLK_R SD_R LSB MSB LSB MSB Data 1 LSB Data 2 (b) DSP Format Figure 3-18. Serial Audio Interface Timing Diagram 3.9.4 Analog Audio Input Clamping An internal clamping circuit provides mid-level clamping of all four analog audio inputs to a dc level of approximately 0.625 V. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 33 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 3.9.5 www.ti.com Audio Cascade Connection A IN_1 S D_CO BCLK_R A IN_2 LRCLK_R A IN_3 SD_R A IN_4 XTAL_IN X TAL TVP5158 First Stage SD_M XTAL_OUT B CLK_CI OS C_OUT LRC LK_CI A IN_5 SD_CI S D_CO A IN_6 A IN_7 TVP5158 Second Stage A IN_8 XTAL_IN OS C_OUT A IN_9 SD_CI S D_CO AIN_11 TVP5158 Third Stage XTAL_IN OS C_OUT AIN_13 BCLK_R LRCLK_R SD_R LRCLK_R SD_R SD_M SD_M Record Output (A IN_5-AN_16) LRC LK_CI BC LK_R BCLK_R LRCLK_R SD_R LRCLK_R SD_R SD_M SD_M Record Output (A IN_9-AN_16) BC LK_CI SD_CI S D_CO AIN_14 AIN_15 TVP5158 Last Stage AIN_16 BC LK_R B CLK_CI AIN_10 AIN_12 Record Output (A IN_1-AN_16) Mix Output LRCLK_CI BC LK_R BCLK_R LRCLK_R SD _R LRCLK_R SD_R SD _M SD_M Record Output (A IN_13-AN_16) XTAL_IN OS C_OUT SD_CI Figure 3-19. Audio Cascade Connection TVP5158 supports up to four devices cascaded together for audio cascade connection. The I2S output of master TVP5158 (1st stage) combines all audio channel data from cascaded TVP5158 devices. Key Features of Audio Cascade Connection * 16-Bit linear PCM data * I2S format * Bit Clock: 256 fs * All cascade inputs are always in slave mode * Second to fourth stage serial audio outputs are always in master mode * First stage serial audio output can be in either master or slave mode * Common clock source for all cascaded devices is required The Serial Audio Output Channel Assignment shown on Table 3-15. 34 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 3-15. Serial Audio Output Channel Assignment I2S LRCLK_R Left tdm_ch tdm_out_pin Slot 1 SD_R Slot 2 Slot 3 Slot 4 Slot 5 LRCLK_R Right Slot 6 Slot 7 Slot 8 AIN_1 Slot 9 Slot 10 Slot 11 Slot 12 Slot 13 Slot 14 Slot 15 Slot 16 AIN_2 0 SD_M 0 (2 channel) SD_R AIN_1 SD_M AIN_2 SD_R AIN_1 1 AIN_3 AIN_2 AIN_4 0 SD_M 1 (4 channel) SD_R AIN_1 SD_M AIN_3 AIN_2 SD_R AIN_1 AIN_3 1 AIN_4 AIN_5 AIN_7 AIN_2 AIN_4 AIN_6 AIN_8 AIN_8 AIN_10 AIN_12 AIN_8 AIN_10 AIN_12 AIN_14 AIN_16 0 SD_M 2 (8 channel) SD_R AIN_1 AIN_5 AIN_2 AIN_6 SD_M AIN_3 AIN_7 AIN_4 AIN_8 SD_R AIN_1 AIN_3 AIN_2 AIN_4 AIN_6 1 AIN_5 AIN_7 AIN_9 AIN_11 0 SD_M 3 (12 channel) SD_R AIN_1 AIN_5 AIN_9 AIN_2 AIN_6 AIN_10 SD_M AIN_3 AIN_7 AIN_11 AIN_4 AIN_8 AIN_12 SD_R AIN_1 AIN_3 AIN_5 AIN_7 AIN_2 AIN_4 AIN_6 1 AIN_9 AIN_11 AIN_13 AIN_15 0 SD_M 4 (16 channel) SD_R AIN_1 AIN_5 AIN_9 AIN_13 AIN_2 AIN_6 AIN_10 AIN_14 SD_M AIN_3 AIN_7 AIN_11 AIN_15 AIN_4 AIN_8 AIN_12 AIN_16 Slot 1 Slot 2 Slot 9 Slot 10 Slot 11 Slot 12 Slot 13 Slot 14 Slot 15 Slot 16 SD_R AIN_1 AIN_2 1 DSP Format tdm_ch tdm_out_pin Slot 3 Slot 4 AIN_2 AIN_4 Slot 5 Slot 6 Slot 7 Slot 8 AIN_2 AIN_4 AIN_6 AIN_8 AIN_2 AIN_4 AIN_6 AIN_8 AIN_10 AIN_12 AIN_2 AIN_4 AIN_6 0 SD_M 0 (2 channel) SD_R AIN_1 SD_M AIN_2 SD_R AIN_1 AIN_3 1 0 SD_M 1 (4 channel) SD_R AIN_1 AIN_2 SD_M AIN_3 AIN_4 SD_R AIN_1 AIN_3 AIN_5 AIN_7 1 0 SD_M 2 (8 channel) SD_R AIN_1 AIN_5 AIN_2 AIN_6 SD_M AIN_3 AIN_7 AIN_4 AIN_8 SD_R AIN_1 AIN_3 AIN_5 AIN_7 AIN_9 AIN_11 1 0 SD_M 3 (12 channel) SD_R AIN_1 AIN_5 AIN_9 AIN_2 AIN_6 AIN_10 SD_M AIN_3 AIN_7 AIN_11 AIN_4 AIN_8 AIN_12 SD_R AIN_1 AIN_3 AIN_5 AIN_7 AIN_9 AIN_11 AIN_13 AIN_15 SD_R AIN_1 AIN_5 AIN_9 AIN_13 AIN_2 AIN_6 AIN_10 AIN_14 SD_M AIN_3 AIN_7 AIN_11 AIN_15 AIN_4 AIN_8 AIN_12 AIN_16 1 AIN_8 AIN_10 AIN_12 AIN_14 AIN_16 0 SD_M 4 (16 channel) 1 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 35 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 3.10 I2C Host Interface The I2C standard consists of two signals, serial input/output data line (SDA) and input/output clock line (SCL), which carry information between the devices connected to the bus. The input pins I2CA0, I2CA1 and I2CA2 are used to select the slave address to which the device responds. Although the I2C system can be multi-mastered, the TVP5158 decoder functions as a slave device only. Both SDA and SCL must be connected to IOVDD via pullup resistors. When the bus is free, both lines are high. The slave address select terminals (I2CA0, I2CA1 and I2CA2) enable the use of up to eight devices on the same I2C bus. At the trailing edge of reset, the status of the I2CA0, I2CA1 and I2CA2 lines are sampled to determine the device address used. Table 3-16 summarizes the terminal functions of the I2C host interface. Table 3-17 shows the device address selection options. Table 3-16. I2C Terminal Description SIGNAL TYPE DESCRIPTION I2CA0 I Slave address selection I2CA1 I Slave address selection I2CA2 I Slave address selection SCL I/O (open drain) Input/output clock line SDA I/O (open drain) Input/output data line Table 3-17. I2C Host Interface Device Addresses A6 A5 A4 A3 A2(I2CA2) A1(I2CA1) A0 (I2CA0) R/W HEX 1 0 1 1 0 0 0 1/0 B1/B0 1 0 1 1 0 0 1 1/0 B3/B2 1 0 1 1 0 1 0 1/0 B5/B4 1 0 1 1 0 1 1 1/0 B7/B6 1 0 1 1 1 0 0 1/0 B9/B8 1 0 1 1 1 0 1 1/0 BB/BA 1 0 1 1 1 1 0 1/0 BD/BC 1 0 1 1 1 1 1 1/0 BF/BE Data transfer rate on the bus is up to 400 kbit/s. The number of devices connected to the bus is dependent on the bus capacitance limit of 400 pF. The data on the SDA line must be stable during the high period of the SCL except for start and stop conditions. The high or low state of the data line can only change with the clock signal on the SCL line being low. A high-to-low transition on the SDA line while the SCL is high indicates an I2C start condition. A low-to-high transition on the SDA line while the SCL is high indicates an I2C stop condition. Every byte placed on the SDA must be 8 bits long. The number of bytes which can be transferred is unrestricted. Each byte must be followed by an acknowledge bit. The acknowledge-related clock pulse is generated by the I2C master. To simplify programming of each of the 4 decoder channels a single I2C write transaction can be transmitted to any one or more of the 4 cores in parallel. This reduces the time required to download firmware or to configure the device when all channels are to be configured in the same manner. It also enables the addresses for all registers to be common across all decoders. I2C subaddress FEh contains 4 bits with each bit corresponding to one of the decoder cores. If a decoder write enable bit is set, then I2C write transactions are sent to the corresponding decoder core. For multibyte I2C write transactions, there are options to auto-increment the subaddress or to auto-increment through the selected decoders or both. 36 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 I2C subaddress FFh contains 4 bits with each bit corresponding to one of the decoder cores. If a decoder read enable bit is set, then I2C read transactions are sent to the corresponding decoder core. If more than one decoder is enabled for reads, then the lowest numbered decoder that is enabled responds to the read transaction. For multi-byte I2C read transactions, there are options to auto-increment the subaddress or to auto-increment through the selected decoders or both. 3.10.1 I2C Write Operation Data transfers occur utilizing the following formats. An I2C master initiates a write operation to the decoder by generating a start condition (S) followed by the decoder I2C address (as shown below), in MSB first bit order, followed by a 0 to indicate a write cycle. After receiving an acknowledge from the decoder, the master presents the subaddress of the register, or the first of a block of registers it wants to write, followed by one or more bytes of data, MSB first. The decoder acknowledges each byte after completion of each transfer. The I2C master terminates the write operation by generating a stop condition (P). Step 1 0 I2C Start (master) S Step 2 7 6 5 4 3 2 1 0 1 0 1 1 1 0 X 0 2 I C General address (master) Step 3 9 I2C Acknowledge (slave) A Step 4 I2C Write register address (master) Step 5 I C Acknowledge (slave) 5 4 3 2 1 0 Addr Addr Addr Addr Addr Addr A (1) I2C Write data (master) 7 6 5 4 3 2 1 0 Data Data Data Data Data Data Data Data Step 7 (1) 9 I2C Acknowledge (slave) A Step 8 0 2 I C Stop (master) (1) 6 Addr 9 2 Step 6 7 Addr P Repeat steps 6 and 7 until all data have been written. 3.10.2 I2C Read Operation The read operation consists of two phases. The first phase is the address phase. In this phase, an I2C master initiates a write operation to the decoder by generating a start condition (S) followed by the decoder slave address, in MSB first bit order, followed by a 0 to indicate a write cycle. After receiving acknowledge from the decoder, the master presents the subaddress of the register or the first of a block of registers it wants to read. After the cycle is acknowledged, the master has the option of generating a stop condition or not. In the data phase, an I2C master initiates a read operation to the decoder by generating a start condition followed by the decoder I2C slave address (as shown below for a read operation), in MSB first bit order, followed by a 1 to indicate a read cycle. After an acknowledge from the decoder, the I2C master receives one or more bytes of data from the decoder. The I2C master acknowledges the transfer at the end of each byte. After the last data byte has been transferred from the decoder, the master generates a not acknowledge followed by a stop. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 37 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Read Phase 1 Step 1 0 I2C Start (master) S Step 2 7 6 5 4 3 2 1 0 1 0 1 1 X X X 0 2 I C General address (master) Step 3 9 I2C Acknowledge (slave) A Step 4 I2C Read register address (master) Step 5 I C Acknowledge (slave) 3 2 1 0 Addr Addr Addr Addr 0 Step 6 is optional. Read Phase 2 Step 7 0 I2C Start (master) S Step 8 7 6 5 4 3 2 1 0 1 0 1 1 X X X 1 I C General address (master) Step 9 9 I2C Acknowledge (slave) A Step 10 (1) I2C Read data (slave) Step 11 (1) 2 7 6 5 4 3 2 1 0 Data Data Data Data Data Data Data Data 9 I C Not Acknowledge (master) 38 4 Addr P 2 (1) 5 Addr A (1) I2C Stop (master) (1) 6 Addr 9 2 Step 6 7 Addr A Step 12 0 I2C Stop (master) P Repeat steps 10 and 11 for all bytes read. Master does not acknowledge the last read data received. Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 3.10.3 VBUS Access The TVP5158 video decoder has additional internal registers accessible through an indirect access to an internal 24-bit address wide VBUS. Figure 3-20 shows the VBUS registers access. 00h I2C Registers Comb Filter RAM 2 IC Host Processor VBUS Registers 00 0000h VBUS [23:0] E0h E1h E8h EAh 40 3E50h 40 3EEFh VBUS Data VBUS Address A0 3FFFh FFh Figure 3-20. VBUS Access VBUS Write Single Byte S B8 ACK E8 ACK S B8 ACK E0 ACK VA0 ACK Send Data VA1 ACK ACK P VA1 ACK ACK ... ACK VA2 ACK P VA2 ACK P Multiple Bytes S B8 ACK E8 ACK S B8 ACK E1 ACK VA0 ACK Send Data Send Data ACK P VBUS Read Single Byte S B8 ACK E8 ACK VA0 ACK VA1 S B8 ACK E0 ACK S B9 ACK VA2 Read Data ACK P NAK P ACK P Multiple Bytes S B8 ACK E8 ACK VA0 ACK VA1 S B8 ACK E1 ACK S B9 ACK NOTE: ACK VA2 Read Data MACK ... Read Data NAK P Examples use default I2C address ACK: Acknowledge generated by the slave MACK: Acknowledge generated by the master NAK: No Acknowledge generated by the master Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 39 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 3.11 Clock Circuits An analog clock multiplier PLL is used to generate a system clock from an external 27-MHz crystal (fundamental resonant frequency) or external clock reference input. A crystal can be connected across terminals 99 (XTAL_IN) and 101 (XTAL_OUT), or a 1.8-V external clock input can be connected to terminal 99. Four horizontal PLLs generate the line-locked sample clock for each video decoder core from the system clock. Four color PLLs generate the color subcarrier frequency for each video decoder core from the corresponding line-locked clock. Four vertical PLLs generate the field/frame sync for each video decoder core. A frequency synthesizer generates the 32.768-MHz audio oversampling clock for each analog audio input from the system clock. Figure 3-21 shows the reference clock configurations. For the example crystal circuit shown, the external capacitors must have the following relationship: CL1 = CL2 = 2CL - CSTRAY Where, CSTRAY is the terminal capacitance with respect to ground CL is the crystal load capacitance specified by the crystal manufacturer 27-MHz Crystal 0W VSSA 27-MHz CLK Output to other TVP5158 XTAL_IN pin 27-MHz CLK Output to other TVP5158 XTAL_IN pin Figure 3-21. Clock and Crystal Connectivity 40 Functional Description Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 3.12 Reset Mode Terminal 3 (RESETB) is active low signal to hold the decoder into reset. Table 3-18 shows the configuration of reset mode. Table 3-19 describes the status of the decoder signals during and immediately after reset. Figure 3-22 shows the reset timing. After power-up, the device is in an unknown state until properly reset. An active-low reset, Reset B, of greater than or equal to 20 ms is required following active and stable supply ramp-up. To avoid potential I2C issues, keep SCL and SDA inactive (high) for at least 260 s after reset goes high. There are no power sequencing requirements except that all power supplies should become active and stable within 500 ms of each other. Table 3-18. Reset Mode RESETB CONFIGURATION 0 Resets the decoder 1 Normal operation Table 3-19. Reset Sequence SIGNAL NAME DURING RESET RESET COMPLETED DVO_A_[7:0], DVO_B_[7:0], DVO_C_[7:0], DVO_D_[7:0], OCLK_P, OCLK_N, INTREQ, I2CA[2:0], BCLK_R, LRCLK_R, SD_R, SD_M, SD_CO Input High-impedance RESETB, SDA, SCL, LRCLK_CI, BCLK_CI, SD_CI, XTAL_IN Input Input XTAL_OUT, OSC_OUT Output Output 20 ms (min) Normal operation RESETB (Terminal 3) Reset 260 s (min) 2 Invalid I C Cycle Valid Figure 3-22. Reset Timing Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Functional Description 41 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 4 Internal Control Registers 4.1 Overview The decoder is initialized and controlled by a set of internal registers which set all device operating parameters. Communication between the external controller and the decoder is through I2C. Table 4-1 shows the summary of these registers. The reserved registers must not be written. Reserved bits in the defined registers must be written with 0s, unless otherwise noted. The detailed programming information of each register is described in the following sections. I2C register FEh controls which of the four decoders will receive I2C commands. I2C register FFh controls which decoder core responds to I2C reads. Note that for a read operation, it is necessary to perform a write first to set the desired subaddress for reading. Compared to previous video decoder, TVP5154A, the TVP5158, TVP5157, and TVP5156 add decoder auto increment and address auto increment bits control. If decoder auto increment bit is set, the next read/write is from/to the next decoder that is enabled. If address auto-increment bit is set, the address increments after all the decoders enabled read/writes are completed. The detail of I2C registers FEh and FFh is shown in their register section. Table 4-1. Registers Summary REGISTER NAME I2C SUBADDRESS DEFAULT R/W (1) Status 1 00h R Status 2 01h R Color Subcarrier Phase Status 02h R Reserved 03h ROM Version 04h R RAM Version MSB 05h R RAM Version LSB 06h R Reserved 07h Chip ID MSB 08h 51h R 09h 58h R Chip ID LSB Reserved 0Ah - 0Bh Video Standard Status 0Ch Video Standard Select 0Dh 00h R/W R CVBS Autoswitch Mask 0Eh 03h R/W Auto Contrast Mode 0Fh 03h R/W Luminance Brightness 10h 80h R/W Luminance Contrast 11h 80h R/W Brightness and Contrast Range Extender 12h 00h R/W Chrominance Saturation 13h 80h R/W Chrominance Hue 14h 00h R/W Reserved 15h Color Killer 16h 10h R/W Reserved 17h Luminance Processing Control 1 18h 40h R/W Luminance Processing Control 2 19h 00h R/W Power Control 1Ah 00h R/W Chrominance Processing Control 1 1Bh 00h R/W Chrominance Processing Control 2 1Ch 0Ch R/W (1) 42 R = Read only, W = Write only, R/W = Read and write Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-1. Registers Summary (continued) REGISTER NAME Reserved I2C SUBADDRESS DEFAULT R/W (1) 1Dh - 1Fh AGC Gain Status 1 20h R AGC Gain Status 2 21h R Reserved 22h Back-End AGC Status 23h Status Request 24h 00h R/W AFE Gain Control 25h F5h R/W Luma ALC Freeze Upper Threshold 26h 00h R/W Chroma ALC Freeze Upper Threshold 27h 00h R/W Reserved 28h R AGC Increment Speed 29h 06h R/W AGC Increment Delay 2Ah 1Eh R/W AGC Decrement Speed 2Bh 04h R/W AGC Decrement Delay 2Ch 00h R/W AGC White Peak Processing 2Dh F2h R/W Back-End AGC Control 2Eh 08h R/W 086Ah R/W 7Ah/84h R/W Reserved 2Fh - 33h AFE Fine Gain 34h - 35h Reserved 36h - 47h AVID Start Pixel LSBs 48h AVID Start Pixel MSBs 49h 00h/00h R/W AVID Pixel Width 4Ah - 4Bh 02D0h/02D0h R/W Reserved 4Ch - 5Bh NR_Max_Noise 5Ch 28h R/W NR_Control 5Dh 09h R/W 5Eh - 5Fh 0330h R/W Operation Mode Control 60h 00h R/W Color PLL Speed Control 61h 09h R/W 7Ch 02h R/W NR_Noise_Filter Reserved 62h - 7Bh Sync Height Low Threshold Sync Height High Threshold Reserved Clear Lost Lock Detect Reserved 7Dh 08h R/W 7Eh - 80h 03h R/W 81h 00h R/W 03h R/W 82h - 84h V-Sync Filter Shift 85h Reserved 86h 656 Version/F Bit Control 87h 00h R/W F- and V-Bit Decode Control 88h 00h R/W F- and V-Bit Control 89h 16h R/W 00h R/W Reserved 8Ah - 8Bh Output Timing Delay 8Ch Reserved 8Dh - 8Fh Auto Contrast User Table Index 8Fh 04h R/W Blue Screen Y Control 90h 10h R/W Blue Screen Cb Control 91h 80h R/W Blue Screen Cr Control 92h 80h R/W Blue Screen LSB Control 93h 00h R/W Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 43 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-1. Registers Summary (continued) REGISTER NAME I2C SUBADDRESS DEFAULT R/W (1) Noise Measurement LSB 94h Noise Measurement MSB 95h Weak Signal High Threshold 96h 60h R/W 97h 50h R/W Weak Signal Low Threshold R R Reserved 98h - 9Dh NR_Y_T0 9Eh 0Ah R/W NR_U_T0 9Fh BCh R/W NR_V_T0 A0h BCh R/W Reserved A1h Vertical Line Count Status A2h - A3h Reserved A4h - A7H R Output Formatter Control 1 (write to all four decoder cores) A8h 44h R/W Output Formatter Control 2 (write to all four decoder cores) A9h 40h R/W Reserved AAh - ACh Interrupt Control ADh 00h R/W Embedded Sync Offset Control 1 (write to all four decoder cores) AEh 01h R/W Embedded Sync Offset Control 2 (write to all four decoder cores) AFh 00h R/W AVD Output Control 1 B0h 00h R/W AVD Output Control 2 B1h 10h R/W OFM Mode Control B2h 20h R/W OFM Channel Select 1 B3h E4h R/W OFM Channel Select 2 B4h E4h R/W OFM Channel Select 3 B5h 00h R/W OFM Super-Frame Size LSBs B6h 1Bh R/W OFM Super-Frame Size MSBs B7h 04h R/W OFM H-Blank Duration LSBs B8h 40h R/W OFM H-Blank Duration MSBs B9h 00h R/W Misc Ofm Control BAh 00h R/W BBh - BFh 00h R/W Audio Sample Rate Control C0h 00h R/W Analog Audio Gain Control 1 C1h 88h R/W Analog Audio Gain Control 2 C2h 88h R/W Audio Mode Control C3h C9h R/W Audio Mixer Select C4h 01h R/W Audio Mute Control C5h 00h R/W Audio Mixing Ratio Control 1 C6h 00h R/W Audio Mixing Ratio Control 2 C7h 00h R/W Audio Cascade Mode Control C8h 00h R/W Reserved C9h A5h R/W Reserved CAh FFh R/W Reserved CBh 7Eh R/W Reserved CCh 01h R/W Reserved CDh - CFh Reserved Super-frame EAV2SAV duration status LSBs D0h R Super-frame EAV2SAV duration status MSBs D1h R Super-frame SAV2EAV duration status LSBs D2h R Super-frame SAV2EAV duration status MSBs D3h R 44 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-1. Registers Summary (continued) I2C SUBADDRESS REGISTER NAME Reserved DEFAULT R/W (1) D4h - DFh VBUS Data Access With No VBUS Address Increment E0h R/W VBUS Data Access With VBUS Address Increment E1h R/W Reserved E2h - E7h VBUS Address Access E8h - EAh Reserved EBh - F1h R/W Interrupt Status F2h R Reserved F3h Interrupt Mask F4h Reserved F5h 00 0000h R/W 00h R/W Interrupt Clear F6h 00h R/W Decoder Write Enable FEh 0Fh R/W Decoder Read Enable FFh 01h R/W 4.2 Register Definitions Table 4-2. Status 1 Subaddress Default 00h Read only 7 6 5 4 Reserved Line-alternating status Field rate status Lost lock detect 3 Color subcarrier lock status 2 1 0 Vertical sync lock status Horizontal sync lock status TV/VCR status Line-alternating status 0 Non line alternating 1 Line alternating Field rate status 0 60 Hz 1 50 Hz Lost lock detect 0 No lost lock since this bit was last cleared 1 Lost lock since this bit was last cleared Color subcarrier lock status 0 Color subcarrier is not locked 1 Color subcarrier is locked Vertical sync lock status 0 Vertical sync is not locked 1 Vertical sync is locked Horizontal sync lock status 0 Horizontal sync is not locked 1 Horizontal sync is locked TV/VCR status 0 TV 1 VCR Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 45 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-3. Status 2 Subaddress Default 7 Signal present 01h Read only 6 Weak signal detection 5 PAL switch polarity 4 Field sequence status 3 2 Color killed 1 0 Macrovision detection [2:0] Signal present 0 Signal is not present 1 Signal is present Weak signal detection 0 No weak signal 1 Weak signal mode PAL switch polarity 0 PAL switch is zero 1 PAL switch is one Field sequence status 0 Even field 1 Odd field Color killed 0 Color killer is not active 1 Color killer is active Macrovision detection [2:0] 000 No copy protection 001 AGC pulses/pseudo syncs present (Type 1) 010 2-line colorstripe only present 011 AGC pulses/pseudo syncs and 2-line colorstripe present (Type 2) 100 Reserved 101 Reserved 110 4-line colorstripe only present 111 AGC pulses/pseudo syncs and 4-line colorstripe present (Type 3) Table 4-4. Color Subcarrier Phase Status Subaddress Default 7 02h Read only 6 5 4 3 Color subcarrier phase [7:0] 2 1 0 2 1 0 This register shows the color subcarrier phase. Table 4-5. ROM Version Subaddress Default 7 04h Read only 6 5 4 3 ROM version [7:0] ROM Version [7:0] ROM revision number = 02h for PG 1.1 46 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-6. RAM Version MSB Subaddress Default 7 05h Read only 6 5 4 3 RAM version MSB [7:0] 2 1 0 2 1 0 2 1 0 2 1 0 RAM version MSB [7:0] This register identifies the MSB of the RAM code revision number. Table 4-7. RAM Version LSB Subaddress Default 7 06h Read only 6 5 4 3 RAM version LSB [7:0] RAM version LSB [7:0] This register identifies the LSB of the RAM code revision number. Example: Patch Release = v02.01.22 ROM Version = 02h RAM Version MSB = 01h RAM Version LSB = 22h Table 4-8. Chip ID MSB Subaddress Default 7 08h Read only 6 5 4 3 Chip ID MSB [7:0] Chip ID MSB[7:0] This register identifies the MSB of device ID. Value = 51h Table 4-9. Chip ID LSB Subaddress Default 7 09h Read only 6 5 4 3 Chip ID LSB [7:0] Chip ID LSB [7:0] This register identifies the LSB of device ID. This value equals 58h for TVP5158, 57h for TVP5157, and 56h for TVP5156. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 47 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-10. Video Standard Status Subaddress Default 7 Autoswitch 0Ch Read only 6 5 4 3 2 Reserved 1 Video standard [2:0] 0 This register contains information about the detected video standard that the device is currently operating. When in autoswitch mode, this register can be tested to determine which video standard as has been detected. See subaddress: 0Dh. Autoswitch Mode 0 Single standard set 1 Autoswitch mode enabled Video Standard [2:0] 00h Reserved 01h (M, J) NTSC 02h (B, D, G, H, I, N) PAL 03h (M) PAL 04h 05h 06h 07h (Combination-N) PAL NTSC 4.43 Reserved PAL 60 Table 4-11. Video Standard Select Subaddress Default 7 0Dh 00h 6 5 Reserved 4 3 2 1 CVBS Standard [2:0] 0 The user can force the device to operate in a particular video standard mode by writing the appropriate value into this register. Changing these bits causes some register settings to be reset to their defaults. See subaddress: 0Ch. CVBS Standard [2:0] 00h CVBS Autoswitch mode (default) 01h (M, J) NTSC 02h (B, D, G, H, I, N) PAL 03h (M) PAL 04h (Combination-N) PAL 05h NTSC 4.43 06h Reserved 07h PAL 60 48 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-12. CVBS Autoswitch Mask Subaddress Default 7 Reserved 0Eh 03h 6 PAL 60 5 Reserved 4 NTSC 4.43 3 (Nc) PAL 2 (M) PAL 1 PAL 0 (M, J) NTSC Autoswitch mode mask Limits the video formats between which autoswitch is possible. PAL 60 0 Autoswitch does not include PAL 60 (default) 1 Autoswitch includes PAL 60 NTSC 4.43 0 Autoswitch does not include NTSC 4.43 (default) 1 Autoswitch includes NTSC 4.43 (Nc) PAL 0 Autoswitch does not include (Nc) PAL (default) 1 Autoswitch includes (Nc) PAL (M) PAL 0 Autoswitch does not include (M) PAL (default) 1 Autoswitch includes (M) PAL PAL 0 1 0 1 (M, J) NTSC Reserved Autoswitch includes (B, D, G, H, I, N) PAL (default) Reserved Autoswitch includes (M, J) NTSC (default) Table 4-13. Auto Contrast Mode Subaddress Default 7 0Fh 03h 6 5 4 3 2 Reserved 1 0 Auto Contrast Mode [1:0] Auto Contrast Mode [1:0] 00h Enabled 01h Reserved 02h User Mode 03h Disabled (default) Table 4-14. Luminance Brightness Subaddress Default 7 10h 80h 6 5 4 3 2 1 0 Brightness [7:0] Brightness [7:0] This register works for the luminance. See subaddress 12h. 0000 0000 0 (dark) 1000 0000 128 (default) 1111 1111 255 (bright) The output black level relative to the nominal black level (64 out of 1024) as a function of the Brightness[7:0] setting is as follows: Black Level = nominal_black_level + (MB + 1) x (Brightness[7:0] - 128) Where MB is the brightness multiplier setting in the Brightness and Contrast Range Extender register at I2C subaddress 12h. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 49 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-15. Luminance Contrast Subaddress Default 7 11h 80h 6 5 4 3 2 1 0 Contrast [7:0] Contrast [7:0] This register works for the luminance. See subaddress 12h. 0000 0000 0 (minimum contrast) 1000 0000 128 (default) 1111 1111 255 (maximum contrast) The total luminance gain relative to the nominal luminance gain as a function of the Contrast [7:0] setting is as follows: Luminance Gain = (nominal_luminance_gain) x [Contrast[7:0] / 64 / (2MC) + MC - 1] Where MC is the contrast multiplier setting in the Brightness and Contrast Range Extender register at I2C subaddress 12h. Table 4-16. Brightness and Contrast Range Extender Subaddress Default 7 12h 00h 6 5 Reserved 4 Contrast multiplier 3 2 1 0 Brightness multiplier [3:0] Contrast multiplier [4] (MC) Increases the contrast control range. 0 2x contrast control range (default), Gain = n/64 - 1 where n is the contrast control and 64 n 255 1 Normal contrast control range, Gain = n/128 where n is the contrast control and 0 n 255 Brightness multiplier [3:0] (MB) Increases the brightness control range from 1x to 16x. 0h 1x (default) 1h 2x 3h 4x 7h 8x Fh 16x NOTE: The brightness multiplier should be set to 3h for 8-bit outputs. Table 4-17. Chrominance Saturation Subaddress Default 7 13h 80h 6 5 4 3 2 1 0 Saturation [7:0] Saturation [7:0] This register works for the chrominance. 0000 0000 0 (no color) 1000 0000 128 (default) 1111 1111 255 (maximum) The total chrominance gain relative to the nominal chrominance gain as a function of the Saturation [7:0] setting is as follows: Chrominance Gain = (nominal_chrominance_gain) x (Saturation[7:0] / 128) 50 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-18. Chrominance Hue Subaddress Default 7 14h 80h 6 5 4 3 2 1 0 2 Color killer threshold [4:0] 1 0 Hue [7:0] Saturation [7:0] This register works for the chrominance. 0000 0000 -180 1000 0000 0 (default) 1111 1111 +180 Table 4-19. Color Killer Subaddress Default 7 Reserved 16h 10h 6 5 Automatic color killer 4 Automatic color killer 00 Automatic mode (default) 01 Reserved Color killer enabled, The UV terminals are forced to a zero 10 color state. 11 Color killer disabled Color killer threshold [4:0]: Controls the upper and lower color killer hysteresis thresholds. NTSC-M,J (1) (2) Lower Threshold Upper Threshold 0 0000 1.0% 1.4% 0 1000 3.0% 4.3% 1 0000 5.0% 7.2% 1 1000 7.0% 10.0% 1 1111 8.8% 12.6% (1) (2) 3 PAL-B,D,G,H,I,M,N (1) (2) Lower Threshold Upper Threshold 0.8% 1.2% 2.4% 3.5% 4.0% 5.8% 5.6% 8.0% 7.0% 10.0% Expressed as a percent of the nominal color burst amplitude (measured after front-end AGC). For proper color killer operation, the color PLL must be locked to the color burst frequency. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 51 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-20. Luminance Processing Control 1 Subaddress Default 7 NTSC_Ped 18h 40h 6 5 4 3 2 Reserved 1 Luminance signal delay [2:0] 0 NTSC_Ped Specifies whether NTSC composite video inputs are compliant with NTSC-M or NTSC-J. 0 NTSC-M (714/286 ratio, w/ pedestal) - default 1 NTSC-J (714/286 ratio, w/o pedestal) Luminance signal delay [2:0] Luminance signal delays respect to chroma signal in 1x pixel clock increments. 011 3 pixel clocks delay 010 2 pixel clocks delay 001 1 pixel clocks delay 000 0 pixel clocks delay (default) 111 110 101 100 -1 pixel clocks delay -2 pixel clocks delay -3 pixel clocks delay 0 pixel clocks delay Table 4-21. Luminance Processing Control 2 Subaddress Default 19h 00h 7 6 Luma filter select [1:0] 5 4 Reserved 3 2 Peaking gain [1:0] 1 0 Trap filter select [1:0] Luma filter selected [1:0] 00 Luminance adaptive comb enable (default) 01 Luminance adaptive comb disable (trap filter selected) 10 Luma comb/trap filter bypassed 11 Reserved Peaking gain [1:0] 00 0 (default) 01 0.5 10 1 11 2 Trap filter select [1:0] Selects one of the four trap filters to produce the luminance signal by removing the chrominance signal from the composite video signal. The stop band of the chroma trap filter is centered at the chroma subcarrier frequency with the stop-band bandwidth controlled by the two control bits. Trap filter stop-band bandwidth (MHz) Filter select [1:0] NTSC ITU-R BT.601 PAL ITU-R BT.601 00 = (default) 1.2129 1.2129 01 0.8701 0.8701 10 0.7183 0.7383 11 0.5010 0.5010 52 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-22. Power Control Subaddress Default 7 Pwd_ach4 1Ah 00h 6 Pwd_ach3 5 Pwd_ach2 4 Pwd_ach1 3 Pwd_vpll 2 Pwd_ref 1 Pwd_ofm_clk 0 Pwd_video Pwd_ach4 Power down audio channel 4, active high 0 Normal operation (default) 1 Audio channel 4 power down Pwd_ach3 Power down audio channel 3, active high 0 Normal operation (default) 1 Audio channel 3 power down Pwd_ach2 Power down audio channel 2, active high 0 Normal operation (default) 1 Audio channel 2 power down Pwd_ach1 Power down audio channel 1, active high 0 Normal operation (default) 1 Audio channel 1 power down Pwd_vpll Power down video PLL, active high 0 Normal operation (default) 1 Video PLL power down Pwd_ref Power down bandgap reference, active high 0 Normal operation (default) 1 Bandgap reference power down Pwd_ofm_clk Power down OFM clock, active high 0 Normal operation (default) 1 OFM clock power down Pwd_video Power down video channel corresponding to current decoder core, active high 0 Normal operation (default) 1 Power down video channel corresponding to current decoder core Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 53 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-23. Chrominance Processing Control 1 Subaddress Default 7 1Bh 00h 6 5 Reserved 4 Color PLL reset 3 Chroma adaptive comb enable 2 Reserved 1 0 Automatic color gain control [1:0] Color PLL reset 0 Color subcarrier PLL not reset (default) 1 Color subcarrier PLL reset Chrominance adaptive comb enable This bit is effective on composite video only. 0 Enabled (default) 1 Disabled Automatic color gain control (ACGC) [1:0] 00 01 10 11 ACGC enabled (default) Reserved ACGC disabled, ACGC set to the nominal value ACGC frozen to the previously set value Table 4-24. Chrominance Processing Control 2 Subaddress Default 7 1Ch 0Ch 6 5 4 Reserved 3 PAL compensation 2 WCF 1 0 Chrominance filter select [1:0] PAL compensation This bit is not effective to NTSC mode. 0 Disabled 1 Enabled (default) Wideband chroma LPF filter (WCF) 0 Disabled 1 Enabled (default) Chrominance filter select [1:0] This register trades chroma bandwidth for less false color. 00 Disabled (default) 01 Notch 1 10 Notch 2 11 Notch 3 54 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-25. AGC Gain Status Subaddress Default 20h-21h Read Only Subaddress 20h 21h 7 6 5 4 3 2 Fine Gain [7:0] Fine Gain [13:8] Reserved 1 0 These AGC gain status registers are updated automatically when the AGC is enabled; in manual gain control mode these register values are not updated. Because this register is a multi-byte register, it is necessary to "capture" the setting into the register to ensure that the value is not updated between reading the lower and upper bytes. To cause this register to "capture" the current settings bit 0 of I2C register 24h (Status Request) should be set to a 1. After the internal processor has updated this register, bit 0 of register 24h is cleared, indicating that both bytes of the AGC gain status register have been updated and can be read. Either byte may be read first, because no further update occurs until bit 0 of 24h is set to 1 again. Table 4-26. Back-End AGC Status Subaddress Default 7 23h Read Only 6 5 4 3 2 1 0 2 1 0 Capture Gain [7:0] Current back-end AGC ratio = Gain/128. Table 4-27. Status Request Subaddress Default 7 24h 00h 6 5 4 Reserved 3 Capture Setting a 1 in this register causes the inter processor to capture the current settings of the AGC status, noise measurement, and the vertical line count registers. Because this capture is not immediate, it is necessary to check for completion of the capture by reading the "capture" bit repeatedly after setting it and waiting for it to be cleared by the internal processor. After the "capture" bit is 0, the AGC status, noise measurement, and vertical line counters (20h/21h, 94h/95h, and A2h/A3h) have been updated, and can be safely read in any order. Table 4-28. AFE Gain Control Subaddress Default 7 25h F5h 6 5 Reserved 4 3 2 ALC 1 Reserved 0 AGC Reserved For future compatibility, all reserved bits must be set to logic 1. ALC Active-high automatic level control (ALC) enable 0 ALC disabled (manual level control) 1 ALC enabled (default) AGC Active-high automatic gain control (AGC) enable 0 AGC disabled (manual gain control) 1 AGC enabled (default) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 55 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-29. Luma ALC Freeze Upper Threshold Subaddress Default 7 26h 00h 6 5 4 3 Luma ALC freeze [7:0] 2 1 0 Upper hysteresis threshold for luma ALC freeze function. The lower hysteresis threshold for the ALC freeze function is fixed at 1 count out of 4096. Setting the upper threshold to 00h (default condition) disables the ALC freeze function. Table 4-30. Chroma ALC Freeze Upper Threshold Subaddress Default 7 27h 00h 6 5 4 3 Chroma ALC freeze [7:0] 2 1 0 Upper hysteresis threshold for chroma ALC freeze function. The lower hysteresis threshold for the ALC freeze function is fixed at 1 count out of 4096. Setting the upper threshold to 00h (default condition) disables the ALC freeze function. Recommend a setting of 02h or greater when enabled. Table 4-31. AGC Increment Speed Subaddress Default 7 29h 06h 6 5 Reserved 4 3 2 1 AGC increment speed [3:0] 0 AGC increment speed Controls the filter coefficient of the first-order, recursive automatic gain control (AGC) algorithm whenever incrementing the gain. 000 0 (fastest) 110 6 (default) 111 7 (slowest) Table 4-32. AGC Increment Delay Subaddress Default 7 2Ah 1Eh 6 5 4 3 AGC increment delay [7:0] 2 1 0 AGC increment delay [7:0] Number of frames to delay gain increments. Also see AGC decrement delay at subaddress 2Ch. 00000000 0 00011110 30 frames (default) 11111111 255 frames 56 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-33. AGC Decrement Speed Subaddress Default 7 2Bh 04h 6 5 Reserved 4 3 2 1 AGC decrement speed [2:0] 0 AGC decrement speed Controls the filter coefficient of the first-order recursive automatic gain control (AGC) algorithm when decrementing the gain. NOTE: This register affects the decrement speed only when the amplitude reference used by the AGC is either the composite peak or the luma peak. Also see AGC increment speed at subaddress 29h. 111 7 (slowest) 110 6 (default) 000 0 (fastest) Table 4-34. AGC Decrement Delay Subaddress Default 7 2Ch 00h 6 5 4 3 AGC decrement delay [7:0] 2 1 0 AGC decrement delay [7:0] Number of frames to delay gain decrements. NOTE: This register affects the decrement delay only when the amplitude reference used by the AGC is either the composite peak or the luma peak. Also see AGC increment delay at subaddress 2Ah. 111 0 110 30 (default) 000 255 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 57 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-35. AGC White Peak Processing Subaddress Default 2Dh F2h 7 6 5 4 3 Luma peak A Reserved Color burst A Sync height A Luma peak B 2 Composite peak 1 0 Color burst B Sync height B If all four bits of the lower nibble are set to logic 1 (that is, no amplitude reference selected), then the front-end analog and digital gains are automatically set to nominal values. If all four bits of the upper nibble are set to logic 1 (that is, no amplitude reference selected), then the back-end gain is set automatically to unity. If the input sync height is greater than 100% and the AGC-adjusted output video amplitude becomes less than 100%, then the backend scale factor attempts to increase the contrast in the back-end to restore the video amplitude to 100%. Luma peak A Use of the luma peak as a video amplitude reference for the back-end feed-forward type AGC algorithm 0 Enabled (default) 1 Disabled Color burst A Use of the color burst amplitude as a video amplitude reference for the back-end 0 Enabled (default) 1 Disabled Sync height A Use of the sync-height as a video amplitude reference for the back-end feed-forward type AGC algorithm 0 Enabled (default) 1 Disabled Luma peak B Use of the luma peak as a video amplitude reference for front-end feedback type AGC algorithm 0 Enabled (default) 1 Disabled Composite peak Use of the composite peak as a video amplitude reference for front-end feedback type AGC algorithm 0 Enabled (default) 1 Disabled Color burst B Use of the color burst amplitude as a video amplitude reference for front-end feedback type AGC algorithm 0 Enabled (default) 1 Disabled Sync height B Use of the sync-height as a video amplitude reference for front-end feedback type AGC algorithm 0 Enabled (default) 1 Disabled 58 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-36. Back-End AGC Control Subaddress Default 2Eh 08h 7 6 5 4 3 1 Reserved 2 Peak 1 Color 0 Sync This register allows disabling the back-end AGC when the front-end AGC uses specific amplitude references (sync-height, color burst or composite peak) to decrement the front-end gain. For example, writing 09h to this register disables the back-end AGC whenever the frontend AGC uses the sync-height to decrement the front-end gain. Peak Disables back-end AGC when the front-end AGC uses the composite peak as an amplitude reference. 0 Enabled (default) 1 Disabled Color Disables back-end AGC when the front-end AGC uses the color burst as an amplitude reference. 0 Enabled (default) 1 Disabled Sync Disables back-end AGC when the front-end AGC uses the sync height as an amplitude reference. 0 Enabled (default) 1 Disabled Table 4-37. AFE Fine Gain Subaddress Default 34h-35h 086Ah Subaddress 34h 35h 7 6 5 4 3 2 1 0 FGAIN [7:0] Reserved FGAIN [13:8] FGAIN [13:0] This fine gain applies to CVBS. Fine Gain = (1/2048) x FGAIN where 0 FGAIN 16383. This register works only in manual gain control mode. When AGC is active, writing to any value is ignored. 00 0000 0000 0000 to Reserved 00 0011 1111 1111 00 0100 0000 0000 0.5 00 1000 0000 0000 1 00 1000 0110 1010 1.052 (default) 00 1100 0000 0000 1.5 11 1111 1111 1111 7.9995 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 59 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-38. AVID Start Pixel Subaddress Default Subaddress 48h 49h 48h-49h 007Ah/0084h 7 6 5 4 3 AVID start [7:0] AVID active Reserved 2 1 Reserved 0 AVID start [9:8] AVID start [9:0] AVID start pixel number, this is a absolute pixel location from HS start pixel 0. The TVP5158 updates the AVID start only when the AVID start MSB byte is written to. AVID start pixel register also controls the position of SAV code. If these registers are modified, then the TVP5158 retains the values for each video standard until the device is reset. The values for a particular video standard should be set by forcing the TVP5158 to the desired video standard first using register 0Dh then setting this register. This should be repeated for each video standard where the default values need to be changed. AVID active 0 AVID out active in VBLK (default) 1 AVID out inactive in VBLK Table 4-39. AVID Pixel Width Subaddress Default 4Ah-4Bh 02D0h Subaddress 4Ah 4Bh 7 6 5 4 3 AVID Width [7:0] 2 1 Reserved 0 AVID Width [9:8] AVID Width [9:0] AVID pixel width. The number of pixels width of active video must be an even number. This is an absolute pixel location from HS start pixel 0. The TVP5158 updates the AVID pixel width only when the AVID pixel width MSB byte is written to. AVID Pixel Width register also controls the position of EAV code. If these registers are modified, then the TVP5158 retains the values for each video standard until the device is reset. The values for a particular video standard should be set by forcing the TVP5158 to the desired video standard first using register 0Dh then setting this register. This should be repeated for each video standard where the default values need to be changed. Table 4-40. Noise Reduction Max Noise Subaddress Default 7 Reserved 5Ch 28h 6 5 4 3 NR_Max_Noise [6:0] 2 1 0 NR_Max_Noise [6:0] User-defined maximum noise level 0010 1000 40 (default) 60 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-41. Noise Reduction Control Subaddress Default 5Dh 09h 7 6 5 4 NR_Color_ Killer_En Reserved 3 Block_Width_ UV 2 1 0 Block_Width_Y Test_ Bypass NR_ Bypass NR_Color_Killer_En Noise reduction color killer enabled 0 Disabled (default) 1 Enabled Block_Width_UV Number of UV pixel values which the algorithm uses to generate the noise average. 0 128 pixels 1 256 pixels (default) Block_Width_Y Number of Y pixel values which the algorithm uses to generate the noise average. 0 256 pixels (default) 1 512 pixels Test_Bypass Test mode bypass. This test bypass mode bypasses the Noise Reduction module completely via hard wires and has zero delay for processing. 0 Bypass disabled (default) 1 Bypass enabled NR_Bypass Noise reduction module bypass. The noise reduction module has a bypass capability which enables it to pass through the incoming data during the output active video period, while matching the delay in operation mode. 0 Bypass disabled 1 Bypass enabled (default) Table 4-42. Noise Reduction Noise Filter Beta Subaddress Default 5Eh-5Fh 0330h Subaddress 5Eh 5Fh 7 6 5 4 3 NR_NoiseFilter [7:0] Reserved 2 1 0 NR_NoiseFilter [9:8] NR_NoiseFilter [9:0] Noise reduction noise filter setting 0000 0011 0011 0000 816 (default) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 61 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-43. Operation Mode Control Subaddress Default 7 V-PLL free run 60h 00h 6 Reserved 5 4 H-PLL Response Time 3 V-bit control 2 Freeze C-PLL 1 0 Reserved V-PLL free run mode 0 Disabled (default) 1 Enabled H-PLL Response Time When in the Normal mode, the horizontal PLL (H-PLL) response time is set to its slowest setting. This mode improves noise immunity and provides a more stable output line frequency for standard TV signal sources (for example, TV tuners, DVD players, video surveillance cameras, etc.). When in the Fast mode, the H-PLL response time is set to its fastest setting. This mode enables the H-PLL to respond more quickly to large variations in the horizontal timing (for example, VCR head switching intervals). This mode is recommended for VCRs and also cameras locked to the AC power-line frequency. When in the Adaptive mode, the H-PLL response time is automatically adjusted based on the measured horizontal phase error. In this mode, the H-PLL response time typically approaches its slowest setting for most standard TV signal sources and approaches its fastest setting for most VCR signal sources. 00 Adaptive (default) 01 Reserved 10 Fast 11 Normal V-bit control mode 0 Vertical blanking interval remains constant as total number of lines per frame varies (default) 1 Active video interval remains constant as total number of lines per frame varies Freeze C-PLL 0 Normal operation (default) 1 Freeze color PLL Table 4-44. Color PLL Speed Control Subaddress Default 7 61h 09h 6 5 Reserved 4 3 2 1 CPLL speed [3:0] 0 CPLL speed [3:0] Color PLL speed control 0000 to Reserved 1000 1001 9: Faster (default) 1010 10 1011 11: Slower 1100 to Reserved 1111 62 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-45. Sync Height Low Threshold Subaddress Default 7 7Ch 02h 6 5 4 3 VSync upper thres [7:0] 2 1 0 1 0 1 0 Clear lost lock detect Lower hysteresis threshold for vertical sync-height detection (value/32xtarget sync height). Table 4-46. Sync Height High Threshold Subaddress Default 7 7Dh 08h 6 5 4 3 VSync upper thres [7:0] 2 Upper hysteresis threshold for vertical sync-height detection (value/32xtarget sync height). Table 4-47. Clear Lost Lock Detect Subaddress Default 7 81h 00h 6 5 4 3 2 Reserved Clear lost lock detect Clear bit 4 (lost lock detect) in the status 1 register at subaddress 00h 0 No effect (default) 1 Clears bit 4 in the status 1 register (00h) Table 4-48. VSYNC Filter Shift Subaddress Default 7 85h 03h 6 5 4 3 2 Reserved 1 0 VSYNC filter shift [1:0] VSYNC filter shift [1:0] Used for adaptation of VPLL time constant 00 0 (fast) 01 1 10 2 11 3 (slow) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 63 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-49. 656 Version/F-bit Control Subaddress Default 7 87h 00h 6 5 4 3 2 Reserved 656 version 0 1 F-control 0 1 64 1 656 version 0 F-control Timing confirms to ITU-R BT.656-4 specifications (default) Timing confirms to ITU-R BT.656-3 specifications Odd field causes 0 1 transition in F-bit when in TVP5146 F/V mode (see register 88h) Even field causes 0 1 transition in F-bit when in TVP5146 F/V mode (see register 88h) Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-50. F-Bit and V-Bit Decode Control Subaddress Default 88h 03h 7 6 Reserved 5 4 VPLL 3 Adaptive 2 Reserved 1 0 F-Mode [1:0] VPLL VPLL time constant control 0 VPLL adapts time constants to input signal 1 VPLL time constants fixed Adaptive 0 Enable F and V bit adaptation to detected lines per frame 1 Disable F and V bit adaptation to detected lines per frame F-Mode [1:0] F-bit control mode Auto: If lines per frame is standard decode F and V bits as per 656 standard from line count else decode F bit from 00 VSYNC input and set V bit = 0 01 Decode F and V from input syncs 10 Reserved 11 Always decode F and V bits from line count (TVP5146 compatible) This register is used in conjunction with register 89h as shown: Reg 88h Bit 1 Bit 0 0 0 0 0 0 0 0 0 0 1 0 1 0 1 0 1 1 0 1 0 1 0 1 0 Reg 89h Bit 3 Bit 2 0 0 0 1 1 0 1 1 0 0 0 1 1 0 1 1 0 0 0 1 1 0 1 1 Mode Reserved TVP5158 TVP5158 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Standard LPF F V Reserved Reserved 656 656 656 656 Reserved Reserved Reserved Reserved 656 656 656 656 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 1 1 0 0 TVP5146 656 656 1 1 1 1 1 1 0 1 1 1 0 1 TVP5146 TVP5146 Reserved 656 656 Reserved 656 656 Reserved 656 Toggle Pulse Switch Switch9 Reserved Non-standard LPF F V Reserved Reserved Toggle Switch9 Pulse 0 Reserved Reserved Reserved Reserved Toggle Switch9 Pulse 0 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Even = 1 Switch Odd = toggle Toggle Switch Pulse Switch Reserved Reserved ITU-R BT.656 standard Toggles from field to field Pulses low for 1 line prior to field transition V bit switches high before the F bit transition and low after the F bit transition V bit switches high 1 line prior to F bit transition, then low after 9 lines Not used Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 65 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-51. F-Bit and V-Bit Control Subaddress Default 7 Rabbit 89h 16h 6 5 Reserved 4 Fast lock 3 2 F and V [1:0] 1 Phase Det 0 HPLL Rabbit Enable "rabbit ear" 0 Disabled (default) 1 Enabled Fast lock Enable fast lock where vertical PLL is reset and a 2 second timer is initialized when vertical lock is lost; during timeout the detected input VS is output. 0 Disabled 1 Enabled (default) F and V [1:0] F and V control bits are only enabled for F-bit control mode 01 and 10 (see register 88h) F and V 00 01 (default) 10 11 Lines Per Frame Standard Non standard-even Non standard-odd Standard Non standard Standard Non standard Reserved F Bit V Bit ITU-R BT.656 Switch at field boundary Switch at field boundary ITU-R BT.656 Switch at field boundary ITU-R BT.656 Switch at field boundary ITU-R BT.656 Forced to 1 Toggles ITU-R BT.656 Toggles ITU-R BT.656 Pulsed mode Phase Det Enable integral-window phase detector 0 Disabled 1 Enabled (default) HPLL Enable horizontal PLL to free run 0 Disabled (default) 1 Enabled Table 4-52. Output Timing Delay Subaddress Default 7 8Ch 00h 6 Output timing delay [7:0] Adjusts delay for 0000 1111 0000 0001 0000 0000 1111 1111 1111 0000 66 5 4 3 Output timing delay [7:0] 2 1 0 AVID start and stop. +15 pixel delay +1 pixel delay 0 pixel delay (default) -1 pixel delay -16 pixel delay Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-53. Auto Contrast User Table Index Subaddress Default 7 Reserved 8Fh 04h 6 5 AC_User_Mode_Table [2:0] 4 3 2 1 0 1 0 Reserved AC_User_Mode_Table [2:0] User table selection for auto contrast user mode when the register 0Fh sets to 02h. 000 Brighter 1 001 Brighter 2 010 Brighter 3 (Brightest) 011 Darker 1 100 Darker 2 101 Darker 3 (Darkest) 110 to Reserved 111 Table 4-54. Blue Screen Y Control Subaddress Default 7 90h 10h 6 5 4 3 2 Y value [9:2] The Y value of the color screen output when enabled by bit 2 or 3 of the Output Formatter 2 register is programmable using a 10-bit value. The 8 MSBs, bits [9:2], are represented in this register. The remaining two LSB are found in the Blue Screen LSB register. The default color screen output is black. The following table shows the values for registers 90h, 91h, 92h and 93h for several different screen colors. Screen Color Black (default) Blue Green Cyan Red Magenta Yellow White Reg 90h 10h 29h 91h AAh 51h 6Ah D2h EBh Reg 91h 80h F0h 36h A6h 5Ah CAh 10h 80h Reg 92h 80h 6Eh 22h 10h F0h DEh 92h 80h Reg 93h 00h 00h 00h 00h 00h 00h 00h 00h NOTE: The blue screen output mode can be enabled or disabled using bits 3:2 of I2C register A9h. Table 4-55. Blue Screen Cb Control Subaddress Default 7 91h 80h 6 5 4 3 2 1 0 Cb value [9:2] The Cb value of the color screen output when enabled by bit 2 or 3 of the Output Formatter 2 register is programmable using a 10-bit value. The 8 MSBs, bits[9:2], are represented in this register. The remaining two LSB are found in the Blue screen LSB register. The default color screen output is black. See Table 4-54 for example colors. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 67 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-56. Blue Screen Cr Control Subaddress Default 92h 80h 7 6 5 4 3 2 1 0 Cr value [9:2] The Cr value of the color screen output when enabled by bit 2 or 3 of the Output Formatter 2 register is programmable using a 10-bit value. The 8 MSBs, bits[9:2], are represented in this register. The remaining two LSB are found in the Blue Screen LSB register. The default color screen output is black. See Table 4-54 for example colors. Table 4-57. Blue Screen LSB Control Subaddress Default 93h 00h 7 6 5 4 Y value LSB [1:0] Reserved 3 2 Cb value LSB [1:0] 1 0 Cr value LSB [1:0] The two LSBs for the Blue screen Y, Cb, and Cr values are represented in this register. See Table 4-54 for example colors. Table 4-58. Noise Measurement Subaddress Default 94h-95h Read Only Subaddress 94h 95h 7 6 5 4 3 Noise Measurement [7:0] Noise Measurement [15:8] 2 1 0 Noise measurement [15:0] Used by the weak signal detection algorithm. Because this register is a double-byte register, it is necessary to "capture" the setting into the register to ensure that the value is not updated between reading the lower and upper bytes. To cause this register to "capture" the current settings bit 0 of I2C register 24h (status request) should be set to a 1. After the internal processor has updated this register, bit 0 of register 24h is cleared, indicating that both bytes of the noise measurement register have been updated and can be read. Either byte may be read first, because no further update occurs until bit 0 of 24h is set to 1 again. Table 4-59. Weak Signal High Threshold Subaddress Default 7 96h 60h 6 5 4 3 2 1 0 Level [7:0] This register controls the upper threshold of the noise measurement used to determine whether the input signal should be considered a weak signal. Table 4-60. Weak Signal Low Threshold Subaddress Default 7 97h 50h 6 5 4 3 2 1 0 Level [7:0] This register controls the lower threshold of the noise measurement used to determine whether the input signal should be considered a weak signal. 68 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-61. Noise Reduction Y/U/V T0 Subaddress Default 9Eh 0Ah 9Fh BCh A0h BCh Subaddress 9Eh 9Fh A0h 7 6 5 4 3 Noise Reduction Y T0 [7:0] Noise Reduction U T0 [7:0] Noise Reduction V T0 [7:0] 2 1 0 These registers control how much noise filtering is done for Y/U/V channels. The higher the value is, the more noise filtering at the expense of video details. Table 4-62. Vertical Line Count Status Subaddress Default A2h-A3h Read Only Subaddress A2h A3h 7 6 5 4 3 Vertical line [7:0] 2 1 Reserved 0 Vertical line [9:8] This status register is only updated when a status request is initiated via bit 0 of subaddress 24h. Vertical line [9:0] represent the detected a total number of lines from the previous frame. This can be used with nonstandard video signals such as a VCR in trick mode to synchronize downstream video circuitry. NOTE: This register is not double buffered. Because this register is a double-byte register, it is necessary to "capture" the setting into the register to ensure that the value is not updated between reading the lower and upper bytes. To cause this register to "capture" the current settings bit 0 of I2C register 24h (Status Request) should be set to a 1. After the internal processor has updated this register, bit 0 of register 24h is cleared, indicating that both bytes of the vertical line count register have been updated and can be read. Either byte may be read first, because no further update occurs until bit 0 of 24h is set to 1 again. Table 4-63. Output Formatter Control 1 Subaddress Default 7 Reserved A8h 44h 6 YCbCr code range 5 4 CbCr range 3 2 1 0 Reserved This register should be written to all four video decoder cores. YCbCr output code range 0 ITU-R BT.601 coding range (Y ranges from 16 to 235. Cb and Cr range from 16 to 240.) 1 Extended coding range (Y, Cb and Cr range from 1 to 254.) (default) CbCr range format 0 Offset binary code (2's complement + 512) (default) 1 Straight binary code (2's complement) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 69 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-64. Output Formatter Control 2 Subaddress Default 7 A9h 40h 6 5 4 3 2 Blue screen output [1:0] Reserved 1 0 Reserved This register should be written to all four video decoder cores. Blue screen output [1:0] Fully programmable color of "blue screen" to support clean input/channel switching. When enabled, in case of lost lock, or when forced, the TVP5158 waits until the end of the current frame, then switches the output data to a programmable color. Once displaying the "blue screen", the inputs can be switched without causing snow or noise to be displayed on the digital output data. Once the inputs have settled the "blue screen" can be disabled, where the TVP5158 then waits until the end of the current video frame before re-enabling the video stream data to the output ports. 00 Normal operation (default) 01 Blue screen out when TVP5158 detects lost lock 10 Force Blue screen out 11 Reserved Table 4-65. Interrupt Control Subaddress Default 7 Int_Pol ADh 00h 6 Int_Type 5 4 3 2 1 0 1 0 Reserved Int_Pol Interrupt polarity 0 Active low (default) 1 Active high (do not use with open-drain output) NOTE: Active-high output should be used only when push-pull output type is selected (Int_Type = 1). Int_Type Interrupt output type 0 Open-drain output (default) 1 Push-pull output NOTE: An external pullup resistor is required when open drain output is selected (Int Type = 0). Table 4-66. Embedded Sync Offset Control 1 Subaddress Default 7 AEh 01h 6 5 4 3 2 Offset [7:0] Offset [7:0] This register allows the line position of the embedded F and V bit signals to be offset from the 656 standard positions. This register is only applicable to input video signals with a standard number of lines per frame. 01111111 +127 lines 00000001 +1 line (default) 00000000 0 line 11111111 -1 line 10000000 -128 lines 70 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-67. Embedded Sync Offset Control 2 Subaddress Default 7 AFh 00h 6 5 4 3 2 1 0 Offset [7:0] Offset [7:0] This register allows the line relationship between the embedded F and V bit signals to be offset from the 656 standard positions, and moves F relative to V. This register is only applicable to input video signals with a standard number of lines per frame. 0000 0010 +2 lines (maximum setting for NTSC and PAL) 0000 0001 +1 line 0000 0000 0 line 1111 1111 -1 line 1111 0001 -15 lines (minimum setting for NTSC) 1110 1011 -21 lines (minimum setting for PAL) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 71 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-68. AVD Output Control 1 Subaddress Default B0h 00h 7 6 Interleave_mode 5 4 Channel_Mux_Number 3 Output_ type 2 VCS_ID 1 0 Video_Res_Sel This register should be written to all four video decoder cores. Interleave_mode Interleave mode for multi-channel formats 00 Non-interleaved (a.k.a. 1-Ch mode) - (default) 01 Pixel-interleaved mode (2-Ch and 4-Ch only) 10 Line-interleaved mode 11 Line-interleaved, hybrid mode (adds 1-Ch D1 to selected 4-Ch Half-D1, 4-Ch CIF or 8-Ch CIF format) Channel_Mux_Number Number of time-multiplexed channels 00 1-Ch (reserved) 01 10 11 2-Ch 4-Ch (or 4-Ch Half-D1 or CIF + 1-Ch D1 for line-interleaved, hybrid mode) 8-Ch cascade (format depends on VCS_ID, line-interleaved mode only) * Line-interleaved mode - 1st stage: 8-Ch Half-D1 or 8-Ch CIF (video port A) - 2nd stage: 4-Ch Half-D1 or 4-Ch CIF (video port A) * Line-interleaved, hybrid mode - 1st stage: 8-Ch CIF + 1-Ch D1 (video port A) - 2nd stage: 4-Ch CIF (video port A) and 1-Ch D1 (video port B) Output_type Output interface type 0 8-bit ITU-R BT.656 interface (default) 1 16-bit ITU-R BT.601 interface (4-Ch D1 and 4-Ch Half-D1 line-interleaved modes only) VCS_ID Video cascade stage ID. Set to 0 for normal operation. For line-interleaved mode only. 0 1st stage (channels 1 to 4) (default) 1 2nd stage (channels 5 to 8) Video_Res_Sel Video resolution select. Effects multi-channel OFM only. 00 D1 (default) 01 Reserved 10 Half-D1 11 CIF 72 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-69. AVD Output Control 2 Subaddress Default B1h 10h 7 6 LLC_En Line_Crop_En 5 4 Quan_Ctrl 3 Line_ID_Ctrl 2 Chan_ID_ SAVEAV_En 1 Chan_ID_ Blank_En 0 Video_Det_ SAVEAV_En This register should be written to all four video decoder cores. LLC_En Line-locked clock enable, active high. For non-interleaved mode only. For use with Port A only. For D1 resolution only. 0 Line-locked clock disabled (default) 1 Line-locked clock enabled Line_ Crop_En AVD line cropping enable, active high. Effects both scaled and unscaled AVD outputs. 0 Cropping disabled (unscaled: 720 pixels/line, down-scaled: 360 pixels/line) - (default) 1 Cropping enabled (unscaled: 704 pixels/line, down-scaled: 352 pixels/line) Quan_Ctrl 10-bit to 8-bit quantization control. Dithering algorithm based on truncation error from previous pixel. 00 Enable simple truncation 01 Enable dithering (default) 10 Enable simple rounding 11 Reserved Line_ID_Ctrl Line ID control. For line-interleaved mode only. 0 Line ID continues counting through the vertical blanking interval - (default) 1 Line ID holds the terminal count from the end of active video through the vertical blanking interval Chan_ID_SAVEAV_En Channel ID inserted in SAV/EAV codes enable, active high. For pixel-interleaved mode only. Always disabled for non-interleaved and line-interleaved modes. 0 Disabled (default) 1 Enabled Chan_ID_Blank_En Channel ID inserted in blanking level enable, active high. For pixel-interleaved mode only. Always disabled for non-interleaved and line-interleaved modes. 0 Disabled (default) 1 Enabled Video_Det_SAVEAV_En Video detection status inserted in SAV/EAV codes enable, active high. For non-interleaved and pixel-interleaved modes. Always enabled for line-interleaved mode. 0 VDET insertion disabled (default) 1 VDET insertion enabled Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 73 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-70. OFM Mode Control Subaddress Default 7 Video_Port_B_ En B2h 20h 6 Out_CLK_ Freq_Ctl 5 OSC_OUT_En 4 Out_CLK_ Pol_Sel 3 Out_CLK_ Freq_Sel 2 Out_CLK_P_En 1 Out_CLK_N_E n 0 Video_Port_En This register only needs to be written to video decoder core 0. Video_Port_B_En Video port B output enable for 6-Ch Half-D1 (2nd stage), active high 0 Video Port B disabled (default) 1 Video Port B enabled Out_CLK_Freq_Ctl Output clock frequency control for 4-Ch Half-D1 + 1-Ch D1 and 8-Ch CIF + 1-Ch D1 line-interleaved, hybrid output formats only. Affects both OCLK_P and OCLK_N. 0 108 MHz (default) 1 81 MHz OSC_OUT_En Oscillator output enable, active high 0 OSC_OUT disabled 1 OSC_OUT enabled (default) Out_CLK_Pol_Sel Output clock polarity select. Affects both OCLK_P and OCLK_N. 0 Non-inverted (default) 1 Inverted Out_CLK_Freq_Sel Output clock frequency select for 2-ch pixel-interleaved mode only. Affects both OCLK_P and OCLK_N. 0 54 MHz (default) 1 27 MHz Out_CLK_P_En Output data clock+ (OCLK_P) enable, active high 0 OCLK_P disabled (default) 1 OCLK_P enabled Out_CLK_N_En Output data clock- (OCLK_N) enable, active high 0 OCLK_N disabled (default) 1 OCLK_N enabled (for 2-Ch mode only) Video_Port_En Video port output enable, active high 0 All four video ports disabled (default) 1 All video ports required for selected output format enabled 74 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-71. OFM Channel Select 1 Subaddress Default B3h E4h 7 6 Chan_Sel_Port_D 5 4 Chan_Sel_Port_C 3 2 Chan_Sel_Port_B 1 0 Chan_Sel_Port_A This register only needs to be written to video decoder core 0. OFM channel select by video port in 1-Ch mode. Chan_Sel_Port_D Channel select for port D 00 Ch 1 01 Ch 2 10 Ch 3 11 Ch 4 (default) Chan_Sel_Port_C Channel select for port C 00 Ch 1 01 Ch 2 10 Ch 3 (default) 11 Ch 4 Chan_Sel_Port_B Channel select for port B 00 Ch 1 01 Ch 2 (default) 10 Ch 3 11 Ch 4 Chan_Sel_Port_A Channel select for port A 00 Ch 1 (default) 01 Ch 2 10 Ch 3 11 Ch 4 NOTE: Each video port must be set to a different channel. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 75 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-72. OFM Channel Select 2 Subaddress Default B4h E4h 7 6 2nd_Chan_Sel_Port_B 5 4 1st_Chan_Sel_Port_B 3 2 2nd_Chan_Sel_Port_A 1 0 1st_Chan_Sel_Port_A This register only needs to be written to video decoder core 0. OFM channel select by video port in 2-Ch mode. 2nd_Chan_Sel_Port_B Second channel select for port B 00 Ch 1 01 Ch 2 10 Ch 3 11 Ch 4 (default) 1st_Chan_Sel_Port_B First channel select for port B 00 Ch 1 01 Ch 2 10 Ch 3 (default) 11 Ch 4 2nd_Chan_Sel_Port_A Second channel select for port A 00 Ch 1 01 Ch 2 (default) 10 Ch 3 11 Ch 4 1st_Chan_Sel_Port_A First channel select for port A 00 Ch 1 (default) 01 Ch 2 10 Ch 3 11 Ch 4 NOTE: Each video port must be set to a different channel. Table 4-73. OFM Channel Select 3 Subaddress Default 7 B5h 00h 6 5 Reserved 4 3 2 1 Hybrid_Chan_Sel [2:0] 0 This register only needs to be written to video decoder core 0. Hybrid_Chan_Sel [2:0] OFM channel select for 1-Ch D1 channel in video cascade mode and hybrid format mode. 000 Ch 1 (default) 001 Ch 2 010 Ch 3 011 Ch 4 100 Cascade input from Port C (for video cascade 1st stage only) 101 Reserved 110 Reserved 111 Reserved 76 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-74. OFM Super-Frame Size Subaddress Default B6h-B7h 041Bh Subaddress B6h B7h 7 6 5 4 3 Super_Frame_Size [7:0] Ctrl_Mode [1:0] Reserved 2 1 0 Super_Frame_Size [11:8] These registers write to decoder core 0 only. Ctrl_Mode [1:0] Super-frame size control mode 00 Super-frame size based on 525-line standard (default) 01 Super-frame size based on 625-line standard 10 Reserved 11 Super-frame size based on manual setting (see subaddress B6h/B7h) Super_Frame_Size [11:0] Total number of lines per super-frame. For line-interleaved mode only. 0100 0001 1011 1051 (default) NOTE: Has no effect on port B in the video cascade interface. Table 4-75. OFM EAV2SAV Duration Subaddress Default B8h-B9h 0040h Subaddress B8h 7 B9h 6 5 Horizontal_Freq_Tol 4 3 OFM_EAV2SAV_Duration [7:0] EAV2SAV_ Duration_ Reserved Mode 2 1 0 OFM_EAV2SAV_ Duration [9:8] These registers only need to be written to video decoder core 0. Horizontal_Freq_Tol Nominal horizontal frequency tolerance (%). Only has an affect when bit 4 is set to 0. 000 0.5% (longest EAV2SAV duration) (default) 001 1.0% 010 1.5% 011 2.0% 100 2.5% 101 3.0% 110 3.5% 111 4.0% (shortest EAV2SAV duration) EAV2SAV_Duration_Mode EAV2SAV duration control mode. 0 EAV2SAV duration automatically controlled 1 EAV2SAV duration based on manual setting (see subaddress B8h/B9h) OFM_EAV2SAV_Duration [9:0] EAV2SAV duration in OCLK_P clock cycles. For non-interleaved and line-interleaved modes. 00 0100 0000 64 (default) NOTE See result of automatic EAV2SAV duration algorithm at status registers D0h-D1h. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 77 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-76. Misc OFM Control Subaddress Default 7 BAh 00h 6 5 4 3 2 1 Reserved 0 OFM_Soft_ Reset OFM_Soft_Reset Soft reset for OFM logic. NOTE: This bit is automatically cleared by firmware when the reset is completed. 0 Normal operation (default) 1 Reset output formatter logic NOTE: In cascade mode, the OFM reset of the 1st stage should be asserted after the OCLK_N output of the 2nd stage is enabled. Table 4-77. Audio Sample Rate Control Subaddress Default 7 C0h 00h 6 5 Reserved 4 3 2 Aud_SamRate_Set[2:0] 1 0 Reserved Aud_SamRate_Set[2:0] Audio sample rate control bits 000 16 kHz (default) 001 8 kHz 010 22.05 kHz 011 11.025 kHz 100 24 kHz 101 12 kHz 110 Reserved 111 Reserved 78 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-78. Analog Audio Gain Control 1 Subaddress Default 7 C1h 88h 6 5 Audio_Gain_Ctrl_CH2 4 3 2 1 Audio_Gain_Ctrl_CH1 0 Audio_Gain_Ctrl_CH2 Analog audio gain control for audio Ch 2. See values below. Audio_Gain_Ctrl_CH1 Analog audio gain control for audio Ch 1 0000 -12.0 dB 0001 -10.5 dB 0010 -9 dB 0011 -7.5 dB 0100 -6 dB 0101 -4.5 dB 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 -3 dB -1.5 dB 0 dB (default) Reserved Reserved Reserved Reserved Reserved Reserved Reserved Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 79 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-79. Analog Audio Gain Control 2 Subaddress Default 7 C2h 88h 6 5 Audio_Gain_Ctrl_CH4 4 3 2 1 Audio_Gain_Ctrl_CH3 0 Audio_Gain_Ctrl_CH4 Analog audio gain control for audio Ch 4. See values below. Audio_Gain_Ctrl_CH3 Analog audio gain control for audio Ch 3 0000 -12.0 dB 0001 -10.5 dB 0010 -9 dB 0011 -7.5 dB 0100 -6 dB 0101 -4.5 dB 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 80 -3 dB -1.5 dB 0 dB (default) Reserved Reserved Reserved Reserved Reserved Reserved Reserved Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-80. Audio Mode Control Subaddress Default C3h C9h 7 6 5 SD_M_En SD_R_En I2S_Mode 4 Serial_IF_Form at 3 BCLK_R_Freq 2 1 Audio_Data_Format 0 TDM_Pin_Sel SD_M_En SD_M output enable, active high 0 SD_M output disabled 1 SD_M output enabled (default) SD_R_En SD_R output enable, active high. 0 SD_R output disabled 1 SD_R output enabled (default) I2S_Mode Audio serial I2S interface mode 0 Slave mode (default) 1 Master mode Serial_IF_Format Audio serial interface format 0 I2S justified mode (default) 1 DSP justified mode BCLK_R_Freq Audio serial interface BCLK_R clock frequency 0 256 fs 1 64 fs (stand alone operation only) (default) Audio_Data_Format Audio serial interface data format 00 16-bit PCM (default) 01 8-bit -Law 10 8-bit A-Law 11 Reserved TDM_Pin_Sel TDM output pin select 0 SD_R only 1 SD_R and SD_M (default) Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 81 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-81. Audio Mixer Select Subaddress Default 7 C4h 01h 6 5 Audio_Mixer_Sel [4:0] 4 3 2 1 TDM_Chan_Number [2:0] 0 Audio_Mixer_Sel [4:0] Audio mixer output select 00000 Mix channel (default) 00001 Ch 1 00010 Ch 2 00011 Ch 3 00100 Ch 4 00101 Ch 5 00110 Ch 6 00111 Ch 7 01000 Ch 8 01001 Ch 9 01010 Ch 10 01011 Ch 11 01100 Ch 12 01101 Ch 13 01110 Ch 14 01111 Ch 15 10000 Ch 16 10001 to Reserved 11111 TDM_Chan_Number [2:0] Number of Audio channels to TDM 000 2 channels 001 4 channels (default) 010 8 channels 011 12 channels 100 16 channels 101 Reserved 110 Reserved 111 Reserved 82 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-82. Audio Mute Control Subaddress Default 7 C5h 00h 6 5 4 Reserved 3 Ch4_Mute 2 Ch3_Mute 1 Ch2_Mute 0 Ch1_Mute Ch4_Mute Ch 4 Audio mute enable, active high. Affects the audio mixer output (SD_M) only (see Figure 3-17). 0 Disabled (default) 1 Enabled Ch3_Mute Ch 3 Audio mute enable, active high. Affects the audio mixer output (SD_M) only (see Figure 3-17). 0 Disabled (default) 1 Enabled Ch2_Mute Ch 2 Audio mute enable, active high. Affects the audio mixer output (SD_M) only (see Figure 3-17). 0 Disabled (default) 1 Enabled Ch1_Mute Ch 1 Audio mute enable, active high. Affects the audio mixer output (SD_M) only (see Figure 3-17). 0 Disabled (default) 1 Enabled Table 4-83. Analog Mixing Ratio Control 1 Subaddress Default 7 C6h 00h 6 5 Audio_Mixing_Ratio_CH2 4 3 2 1 Audio_Mixing_Ratio_CH1 0 Audio_Mixing_Ratio_CH2 Audio mixing ratio for audio channel 2. See values below. Audio_Mixing_Ratio_CH1 Audio mixing ratio for audio channel 1 0000 0.25 (default) 0001 0.31 0010 0.38 0011 0.44 0100 0.5 0101 0.63 0110 0.75 0111 0.88 1000 1.00 1001 1.25 1010 1.5 1011 1.75 1100 2.00 1101 2.25 1110 2.5 1111 2.75 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 83 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-84. Analog Mixing Ratio Control 2 Subaddress Default C7h 00h 7 6 5 Audio_Mixing_Ratio_CH4 4 3 2 1 Audio_Mixing_Ratio_CH3 0 Audio_Mixing_Ratio_CH4 Audio mixing ratio for audio channel 4. See values below. Audio_Mixing_Ratio_CH3 Audio mixing ratio for audio channel 3 0000 0.25 (default) 0001 0.31 0010 0.38 0011 0.44 0100 0.5 0101 0.63 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111 0.75 0.88 1.00 1.25 1.5 1.75 2.00 2.25 2.5 2.75 Table 4-85. Audio Cascade Mode Control Subaddress Default C8h 00h 7 6 5 4 3 2 1 0 Audio_Cas_Mode_Ctrl Reserved Audio_Cas_Mode_Ctrl Audio Cascade Mode control which is cascade stage ID. Set to 00 for standalone operation. 00 First stage (channels 1 to 4) (default) 01 Second stage (channels 5 to 8) 10 Third stage (channels 9 to 12) 11 Fourth stage (channels 13 to 16) Table 4-86. Super-Frame EAV2SAV Duration Status Subaddress Default D0h-D1h Read Only Subaddress D0h D1h 7 6 5 4 3 EAV2SAV [7:0] 2 Reserved 1 0 EAV2SAV [9:8] EAV2SAV [9:0] Super-frame EAV2SAV duration (bytes). For line-interleaved mode only. 84 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-87. Super-Frame SAV2EAV Duration Status Subaddress Default D2h-D3h Read Only Subaddress D2h D3h 7 6 5 4 3 SAV2EAV [7:0] 2 Reserved 1 0 EAV2SAV [10:8] SAV2EAV [10:0] Super-frame SAV2EAV duration (bytes). For line-interleaved mode only. Table 4-88. VBUS Data Access With No VBUS Address Increment Subaddress Default E0h 00h 7 6 5 4 3 2 1 0 VBUS data [7:0] VBUS data [7:0] VBUS data register for VBUS single-byte read/write transaction Table 4-89. VBUS Data Access With VBUS Address Increment Subaddress Default E1h 00h 7 6 5 4 3 2 1 0 VBUS data [7:0] VBUS data [7:0] VBUS data register for VBUS multi-byte read/write transaction. VBUS address is auto-incremented after each data byte read/write. Table 4-90. VBUS Address Access Subaddress Default E8h 00h E9h 00h EAh 00h Subaddress E8h E9h EAh 7 6 5 4 3 VBUS address [7:0] VBUS address [15:8] VBUS address [23:16] 2 1 0 VBUS access address [23:0] VBUS is a 24-bit wide internal bus. The user needs to program the 24-bit address of the internal register to be accessed via host port indirect access mode. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 85 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-91. Interrupt Status Subaddress Default F2h Read Only 7 6 Reserved 5 Sig_Present 4 Weak_Sig 3 V_Lock 2 Macrovision 1 Vid_Std 0 Reserved The host interrupt status register represents the interrupt status after applying mask bits. Therefore, the status bits are the result of a logical AND between the raw status and mask bits. The external interrupt pin is derived from this register as an OR function of all non-masked interrupts in this register. Reading data from the corresponding register does not clear the status flags automatically. These flags are reset using the corresponding bits in the interrupt clear register. Sig_Present Signal present change interrupt. This interrupt is asserted whenever there is a change in the signal present status (bit 7 of register 01h). 0 Not available 1 Available Weak_Sig Weak signal change interrupt. This interrupt is asserted whenever there is a change in the weak signal status (bit 6 of register 01h). 0 Not available 1 Available V_Lock Vertical lock change interrupt. This interrupt is asserted whenever there is a change in the vertical lock status (bit 2 of register 00h). 0 Not available 1 Available Macrovision Macrovision change interrupt. This interrupt is asserted whenever there is a change in the Macrovision detection status (bits 2:0 of register 01h). 0 Not available 1 Available Vid_Std Video standard change interrupt. This interrupt is asserted whenever there is a change in the detected video standard (bits 2:0 of register 0Ch). 0 Not available 1 Available 86 Internal Control Registers Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-92. Interrupt Mask Subaddress Default 7 F4h 00h 6 Reserved 5 Sig_Present 4 Weak_Sig 3 V_Lock 2 Macrovision 1 Vid_Std 0 Reserved The host interrupt mask register can be used by the external processor to mask unnecessary interrupt sources for the interrupt status register bits, and for the external interrupt pin. The external interrupt is generated from all non-masked interrupt flags. Sig_Present Signal present change interrupt mask 0 Interrupt disabled (default) 1 Interrupt enabled Weak_Sig Weak signal change interrupt mask 0 Interrupt disabled (default) 1 Interrupt enabled V_Lock Vertical lock change interrupt mask 0 Interrupt disabled (default) 1 Interrupt enabled Macrovision Macrovision change interrupt mask 0 Interrupt disabled (default) 1 Interrupt enabled Vid_Std Video standard change interrupt mask 0 Interrupt disabled (default) 1 Interrupt enabled Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Internal Control Registers 87 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com Table 4-93. Interrupt Clear Subaddress Default 7 F6h 00h 6 5 Sig_Present Reserved 4 Weak_Sig 3 V_Lock 2 Macrovision 1 Vid_Std 0 Reserved The host interrupt clear register is used by the external processor to clear the interrupt status bits in the host interrupt status register. When no non-masked interrupts remain set in the register, the external interrupt pin also becomes inactive. Sig_Present Signal present change interrupt clear 0 No effect (default) 1 Clear interrupt bit Weak_Sig Weak signal change interrupt clear 0 No effect (default) 1 Clear interrupt bit V_Lock Vertical lock change interrupt clear 0 No effect (default) 1 Clear interrupt bit Macrovision Macrovision change interrupt clear 0 No effect (default) 1 Clear interrupt bit Vid_Std Video standard change interrupt clear 0 No effect (default) 1 Clear interrupt bit Table 4-94. Decoder Write Enable Subaddress Default 7 FEh 0Fh 6 5 Reserved Addr Auto Incr 4 Decoder Auto Incr 3 2 1 0 Decoder 4 Decoder 3 Decoder 2 Decoder 1 This register controls which of the four decoder cores receives I2C write transactions. A 1 in the corresponding Decoder bit enables the decoder to receive write commands. Any combination of decoders can be configured to receive write commands, allowing all four decoders to be programmed concurrently. The following table shows how the address auto-increment and decoder auto-increment functions operate when a multi-byte I2C write transaction occurs. For this example, decoders 2, 3 and 4 are enabled for writes, the subaddress is 0xA0 and 8 bytes of data are written. Decoder Auto Incr Addr Auto Incr Data 1st 2nd 3rd 4th 5th 6th 7th 8th 88 0 0 Dec 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 Internal Control Registers 0 1 Addr A0 A0 A0 A0 A0 A0 A0 A0 Dec 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 2,3,4 1 0 Addr A0 A1 A2 A3 A4 A5 A6 A7 Dec 2 3 4 2 3 4 2 3 1 1 Addr A0 A0 A0 A0 A0 A0 A0 A0 Dec 2 3 4 2 3 4 2 3 Addr A0 A0 A0 A1 A1 A1 A2 A2 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Table 4-95. Decoder Read Enable Subaddress Default 7 FFh 01h 6 5 Reserved Addr Auto Incr 4 Decoder Auto Incr 3 2 1 0 Decoder 4 Decoder 3 Decoder 2 Decoder 1 This register controls which of the four decoder cores responds to I2C read transactions. A 1 in the corresponding bit position enables the decoder to respond to read commands. A 1 in Decoder Auto Increment reads the next byte from the next enabled decoder. If Decoder Auto Increment is 0 and more than one decoder is enabled for reading, then only the lowest numbered decoder responds. A 1 in Address Auto Increment causes the subaddress to increment after read(s) of the current subaddress are completed. The following table shows how the address auto-increment and decoder auto-increment functions operate when a multi-byte I2C read transaction occurs. For this example, decoders 2, 3 and 4 are enabled for reads, the subaddress is 0xA0, and 8 bytes of data are read. Decoder Auto Incr Addr Auto Incr Data 1st 2nd 3rd 4th 5th 6th 7th 8th 0 0 Dec 2 2 2 2 2 2 2 2 0 1 Addr A0 A0 A0 A0 A0 A0 A0 A0 Dec 2 2 2 2 2 2 2 2 1 0 Addr A0 A1 A2 A3 A4 A5 A6 A7 Dec 2 3 4 2 3 4 2 3 Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 1 1 Addr A0 A0 A0 A0 A0 A0 A0 A0 Dec 2 3 4 2 3 4 2 3 Addr A0 A0 A0 A1 A1 A1 A2 A2 Internal Control Registers 89 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 5 Electrical Specifications 5.1 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) VDD Supply voltage range VDD_3_3 to VSS_3_3 0.5 V to 4.0 V VDD_1_1 to VSS_1_1 -0.2 V to 1.2 V VDDA_3_3 to VSSA_3_3 -0.3 V to 3.6 V VDDA_1_8 to VSSA_1_8 -0.2 V to 2.0 V VDDA_1_1 to VSSA_1_1 -0.2 V to 1.2 V VI Digital input voltage range VI to DGND -0.5 V to 4.5 V VO Digital output voltage range VO to DGND -0.5 V to 4.5 V Analog video input voltage range AIN to AGND -0.2 V to 2.5 V Analog audio input voltage range AIN to AGND -0.2 V to 2.0 V TA Operating free-air temperature range Tstg Storage temperature range Commercial range 0C to 70C Industrial range -40C to 85C -65C to 150C JEDEC (3) Human-body model (HBM) VESD AEC-Q100 (4) ESD stress voltage (2) Charged-device model (CDM) (1) (2) (3) (4) (5) (6) 90 All pins >500 V Excluding VSSA, VDD1_1, XTAL_REF pins >1000 V All pins >500 V Excluding VSSA, VDD1_1, XTAL_REF pins >1000 V All pins >250 V JEDEC (5) Excluding VSSA, VDD1_1, XTAL_REF pins >500 V AEC-Q100 (6) All pins >400 V Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Electrostatic discharge (ESD) to measure device sensitivity/immunity to damage caused by electrostatic discharges into the device. Level listed is the passing level per ANSI/ESDA/JEDEC JS-001-2010. JEDEC document JEP155 states that 500V HBM allows safe manufacturing with a standard ESD control process, and manufacturing with less than 500V HBM is possible if necessary precautions are taken. Pins listed as 1000V may actually have higher performance. Tested per AEC Q100-002 rev D Level listed is the passing level per EIA-JEDEC JESD22-C101E. JEDEC document JEP157 states that 250V CDM allows safe manufacturing with a standard ESD control process. Pins listed s 250V may actually have higher performance. Tested per AEC Q100-011 rev B Electrical Specifications Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 5.2 SLES243G - JULY 2009 - REVISED APRIL 2013 Recommended Operating Conditions MIN NOM MAX VDD_3_3 Supply voltage, digital 3 3.3 3.6 V VDD_1_1 Supply voltage, digital 1 1.1 1.2 V VDDA_3_3 Supply voltage, analog 3 3.3 3.6 V VDDA_1_8 Supply voltage, analog 1.65 1.8 1.95 V VDDA_1_1 Supply voltage, analog 1 1.1 1.2 V VI(pp) Analog video input voltage (ac-coupling necessary) (1) 1.2 V VI(pp) Analog audio input voltage (ac-coupling necessary) 0.8 V (2) (3) 0.7 VDD_3_3 UNIT VIH Input voltage high, digital VIL Input voltage low, digital (4) V IOH Output current: DVO outputs/OCLK_N (3) VOUT = 2.4 V -4 mA IOL Output current: DVO outputs/OCLK_N (3) (3) 0.3 VDD_3_3 V VOUT = 0.4 V 4 mA IOH Output current, OCLK_P (3) VOUT = 2.4 V -8 mA IOL Output current, OCLK_P (3) VOUT = 0.4 V 8 TA (1) (2) (3) (4) 5.3 Operating free-air temperature Commercial Industrial 70 C -40 85 C Specified based on a typical 100% Color Bar Signal Exception: 0.7 VDDA_1_8 for XTAL_IN terminal Specified by design Exception: 0.3 VDDA_1_8 for XTAL_IN terminal Reference Clock Specifications MIN Frequency Frequency tolerance (1) mA 0 NOM MAX 27 (1) -50 UNIT MHz 50 ppm This number is the required specification for the external crystal/oscillator and is not tested. Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Electrical Specifications 91 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 5.4 Electrical Characteristics 5.5 DC Electrical Characteristics For minimum/maximum values: VDD_1_1 = 1.0 to 1.2 V, VDD_3_3 = 3.0 V to 3.6 V, VDDA_1_1 = 1.0 V to 1.2 V, VDDA_1_8 = 1.65 V to 1.95 V, VDDA_3_3 = 3.0 V to 3.6 V For typical values (TA = 25C): VDD_1_1 = 1.1 V, VDD_3_3 = 3.3 V, VDDA_1_1 = 1.1 V, VDDA_1_8 = 1.8 V, VDDA_3_3 = 3.3 V (1) PARAMETER TEST CONDITIONS IDD(33D) 3.3-V I/O digital supply current IDD(11D) 1.1-V core digital supply current IDD(33A) 3.3-V analog supply current IDD(18A) 1.8-V analog supply current IDD(11A) 1.1-V analog supply current PTOT Total power dissipation, normal operation MIN TYP MAX UNIT 2-Ch D1 mode at 54 MHz 33 mA 4-Ch D1 mode at 108 MHz 41 mA 2-Ch D1 mode at 54 MHz 143 mA 4-Ch D1 mode at 108 MHz 156 mA 2-Ch D1 mode at 54 MHz 4.5 mA 4-Ch D1 mode at 108 MHz 4.5 mA 2-Ch D1 mode at 54 MHz 172 mA 4-Ch D1 mode at 108 MHz 168 mA 2-Ch D1 mode at 54 MHz 14 mA 4-Ch D1 mode at 108 MHz 17 mA 2-Ch D1 mode at 54 MHz 606 mW 4-Ch D1 mode at 108 MHz 643 mW PAPWD Power dissipation with audio powered 4-Ch D1 mode at 108 MHz down 619 mW PDOWN Total power dissipation with power down (I2C register 1Ah set to FFh) 90 mW Ilkg Input leakage current 20 A CI Input capacitance (2) 8 pF VOH Output voltage high IOH = -4 mA Output voltage low IOL = 4 mA VOL (1) (2) 92 0.8 VDD_3_3 V 0.2 VDD_3_3 V Typical current measurements made with 4-Ch D1 video output at 108 MHz with 4-Ch audio. Specified by design Electrical Specifications Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 5.6 SLES243G - JULY 2009 - REVISED APRIL 2013 Video A/D Converters Electrical Characteristics ADC sample rate = 27 MSPS for video Ch 1, Ch 2, Ch 3, Ch 4 PARAMETER TEST CONDITIONS MIN Video ADC conversion rate TYP MAX 27 Zi Input impedance, analog video inputs (1) Ci Input capacitance, analog video inputs (1) Vi(PP) Full-scale input range of ADC (2) MHz 200 k 10 Ccoupling = 0.1 F 1.4 (1) UNIT pF V G Nominal analog video gain DNL Absolute differential non-linearity (3) AFE only 0.75 1 LSB INL Absolute integral non-linearity AFE only 1 2.5 LSB FR Frequency response Multiburst (60 IRE) -0.9 dB XTALK Input crosstalk (1) 1 MHz -50 dB SNR Signal-to-noise ratio (all channels) (4) Fin = 1 MHz, 1.0 Vpp 54 dB NS Noise spectrum Luma ramp (100 kHz to full, tilt null) -51 dB DP Differential phase Modulated ramp 0.5 deg DG Differential gain Modulated ramp 1.5 % (1) (2) (3) (4) -2.9 dB Specified by design Full range video No missing codes Based on 10-bit internal ADC test mode 5.7 Audio A/D Converters Electrical Characteristics ADC sample rate = 32.768 MSPS for audio Ch 1, Ch 2, Ch 3, Ch 4 PARAMETER Zi TEST CONDITIONS Audio ADC conversion rate fS = 16 kHz Input impedance, analog audio inputs (1) 0-dB PGA gain TYP Input capacitance, analog audio inputs Vi(PP) Full-scale input voltage range of ADC Ccoupling = 2.2 F, 0-dB PGA gain DNL Absolute differential non-linearity (2) AFE only INL Absolute integral non-linearity AFE only XTALK Crosstalk between any two channels SNR Signal-to-noise ratio (all channels) fS = 16 kHz, VIN = -60 dB, 1 kHz System clock frequency per channel MAX 32.768 UNIT MHz 20 k (1) Ci (1) (2) MIN 10 pF 0.75 1 LSB 1 2.5 LSB 1 V -50 dB 56 dB 512 fS Hz Specified by design No missing codes Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Electrical Specifications 93 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 5.8 www.ti.com Video Output Clock and Data Timing 10-pF load for 27 MHz and 54 MHz, 6-pF load for 108 MHz NO. PARAMETER Duty cycle, OCLK_P/OCLK_N t3 t4 Fall time, OCLK_P/OCLK_N Rise time, OCLK_P/OCLK_N t1 Fall time, Data t2 Rise time, Data t5 Propagation delay from falling edge of OCLK_P/OCLK_N TEST CONDITIONS MIN TYP 50%, OCLK_P/OCLK_N = 108 MHz 44 50 MAX UNIT 55 % 90% to 10%, OCLK_P/OCLK_N = 27 MHz 1.4 ns 90% to 10%, OCLK_P/OCLK_N = 108 MHz 1.15 ns 10% to 90%, OCLK_P/OCLK_N = 27 MHz 1.4 ns 10% to 90%, OCLK_P/OCLK_N = 108 MHz 1.15 ns 90% to 10%, Data = 27 MHz 3.4 ns 90% to 10%, Data = 108 MHz 2.9 10% to 90%, Data = 27 MHz 4.2 10% to 90%, Data = 108 MHz 3.4 ns 50%, OCLK_P/OCLK_N = 27 MHz 1.9 4.86 ns 50%, OCLK_P/OCLK_N = 108 MHz 0.22 1.5 ns t3 t4 90% OCLK_P 10% t5 t1,t2 90% DVO_x_[7:0] Valid Data Valid Data 10% Figure 5-1. Video Output Clock and Data Timing 5.8.1 Video Input Clock and Data Timing NOTE Video Cascade Modes: Timing is ensured by design at 27/54MHz input frequency with input trace delays < 2 ns. 94 Electrical Specifications Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 I2C Host Port Timing (1) 5.9 NO. PARAMETER MIN TYP MAX UNIT t1 Bus free time between STOP and START 1.3 s t2 Data Hold time t3 Data Setup time 100 ns t4 Setup time for a (repeated) START condition 0.6 s t5 Setup time for a STOP condition 0.6 ns t6 Hold time (repeated) START condition 0.6 t7 Rise time SDA and SCL signal 250 0 0.9 s s ns t8 Fall time SDA and SCL signal 250 ns Cb Capacitive load for each bus line 400 pF fI2C I2C clock frequency 400 kHz (1) Specified by design Stop SDA Start Stop Data t1 t4 t3 t2 t5 Change SCL Data t7 t6 t8 t6 Figure 5-2. I2C Host Port Timing Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Electrical Specifications 95 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com I2S Port Timing 5.9.1 NOTE Philips I2S bus compliant (specified by design) - See the Philips I2S bus specification 5.10 Miscellaneous Timings PARAMETER tRESET RESETB Signal Low Time for valid reset tvalid I2C valid time, Initialization time after reset until I2C ready MIN TYP MAX UNIT 20 ms 260 s 5.11 Power Dissipation Ratings PARAMETER TEST CONDITIONS (1) JA Junction-to-ambient thermal resistance, still air Thermal PAD soldered to 4-layer High-K PCB 17.17 C/W JC Junction-to-case thermal resistance, still air Thermal PAD soldered to 4-layer High-K PCB 0.12 C/W TJ (max) Maximum junction temperature for reliable operation (1) 96 MIN TYP MAX 105 UNIT C Exposed thermal pad must be soldered to JEDEC High-K PCB with adequate ground plane (see Section 6.5). Electrical Specifications Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 6 Application Information 6.1 4-Ch D1 Applications 4-Ch D1 8Bit@108MHz Figure 6-1. 4-Ch D1 Application (Single BT.656 Interface) DVO_A_[7:0] DVO_B_[7:0] OCLK_P VIN_1 VIN_2 TVP5158 VIN_3 Multi-Ch Video Decoder 4-Ch D1 16Bit@54MHz I2C VPIF-A VPIF-B H.264/MPEG-4 4-Ch D1 Recording DM6467 DaVinci HD Multi-Ch D1 Preview VIN_4 Figure 6-2. 4-Ch D1 Application (16-Bit YCbCr 4:2:2 Interface) 6.2 8-Ch CIF Applications VIN_1 VIN_2 VIN_3 DVO_A_[7:0] OCLK_P 4-Ch CIF + 1-Ch D1 8Bit@54MHz TVP5158 H.264/MPEG-4 8-Ch CIF Recording I2C VIN_4 I2C VIN_1 VIN_2 VIN_3 VIN_4 VPIF-A DVO_A_[7:0] OCLK_P 4-Ch CIF + 1-Ch D1 8Bit@54MHz DM6467 DaVinci HD VPIF-B Multi-Ch D1 Preview TVP5158 Figure 6-3. 8-Ch CIF Real Time Encoding and Multi-Ch D1 Preview Application Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Application Information 97 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com 4-Ch Half-D1 + 1-Ch D1 8Bit@108MHz 4-Ch Half-D1 + 1-Ch D1 8Bit@108MHz NOTE: The backend DSP drops one field of Half-D1 to get CIF format video Figure 6-4. 8-Ch CIF Real Time Encoding and Multi-Ch D1 Preview Application 6.3 16-Ch CIF Applications See Section 3.8.3.3 for the details of 16-Ch CIF applications. 98 Application Information Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com 6.4 SLES243G - JULY 2009 - REVISED APRIL 2013 Application Circuit Examples U1A C70 108 R54 R50 J1B 0.1 F 109 37.4 W VIN_1_P VIN_1_N DVO_A_0 DVO_A_1 DVO_A_2 DVO_A_3 DVO_A_4 DVO_A_5 DVO_A_6 DVO_A_7 78 77 75 74 72 71 69 68 C71 9 75 W 112 3 R55 10 0.1 F 113 R51 37.4 W 75 W 121 R56 0.1 F 122 R52 12 75 W VIN_3_P VIN_3_N DVO_B_0 DVO_B_1 DVO_B_2 DVO_B_3 DVO_B_4 DVO_B_5 DVO_B_6 DVO_B_7 63 62 60 59 57 56 54 53 37.4 W C73 RCA_Octal_stack 125 R57 0.1 F 126 R53 75 W VIN_2_N C72 11 4 VIN_2_P 37.4 W 116 Place R50, R51, R52 and R53 close to J1 Place R54, R55, R56 and R57 close to J1 VIN_4_P VIN_4_N REXT_2K DVO_C_0 DVO_C_1 DVO_C_2 DVO_C_3 DVO_C_4 DVO_C_5 DVO_C_6 DVO_C_7 R58 1.8 kW DVO_D_0 DVO_D_1 DVO_D_2 DVO_D_3 DVO_D_4 DVO_D_5 DVO_D_6 DVO_D_7 OCLK_P OCLK_N/CLKIN 46 45 43 42 40 39 37 36 31 30 28 27 25 24 22 21 51 50 TVP5158 NOTE: System level ESD protection is not included in above application circuit but is recommended. Figure 6-5. Video Input Connectivity Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Application Information 99 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com U1B C65 J1A 95 5 1 2.2 F R60 5.6 kW 6 7 2.2 F AIN_2 SD_R 89 88 C67 R62 93 2.2 F 5.6 kW 8 SD_M 94 R61 5.6 kW 2 AIN_1 C66 AIN_3 LRCLK_R C68 R63 92 5.6 kW 2.2 F BCLK_R 86 85 AIN_4 RCA_Octal_stack 16 R64 R65 R66 R67 5.6 kW 5.6 kW 5.6 kW 5.6 kW 17 19 SD_CO 83 LRCLK_CI BCLK_CI SD_CI TVP5158 NOTE: System level ESD protection is not included in above application circuit but is recommended. NOTE: Resistor divider may vary dependent on expected max input audio levels. Desired analog audio input levels should not exceed 1Vpp. Figure 6-6. Audio Input Connectivity 6.5 Designing with PowerPADTM Devices The TVP5158 device is housed in a high-performance, thermally enhanced, 128-terminal PowerPAD package. Use of the PowerPAD package does not require any special considerations except to note that the thermal pad, which is an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. Therefore, if not implementing the PowerPAD PCB features, the use of solder masks (or other assembly techniques) can be required to prevent any inadvertent shorting by the exposed thermal pad of connection etches or vias under the package. The recommended option, however, is not to run any etches or signal vias under the device, but to have only a grounded thermal land as in the following explanation. Although the actual size of the exposed die pad may vary, the minimum size required for the keep-out area for the 128-terminal PFP PowerPAD package is 9mm x 9mm. It is recommended that there be a thermal land, which is an area of solder-tinned-copper, underneath the PowerPAD package. The thermal land varies in size, depending on the PowerPAD package being used, the PCB construction, and the amount of heat that needs to be removed. In addition, the thermal land may or may not contain numerous thermal vias depending on PCB construction. Other requirements for using thermal lands and thermal vias are detailed in the TI application note PowerPAD Thermally Enhanced Package application report (SLMA002). For the TVP5158 device, this thermal land must be grounded to the low-impedance ground plane of the device. This improves not only thermal performance but also the electrical grounding of the device. It is also recommended that the device ground terminal landing pads be connected directly to the grounded thermal land. The land size should be as large as possible without shorting device signal terminals. The thermal land can be soldered to the exposed thermal pad using standard reflow soldering techniques. While the thermal land can be electrically floated and configured to remove heat to an external heat sink, it is recommended that the thermal land be connected to the low-impedance ground plane for the device. More information can be obtained from the TI application note PHY Layout (SLLA020). 100 Application Information Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 TVP5158, TVP5157, TVP5156 www.ti.com SLES243G - JULY 2009 - REVISED APRIL 2013 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. REVISION SLES243 SLES243A COMMENTS Initial release Table 2-1, XTAL_REF description change. Figure 3-21, 0- resistor added inline between XTAL_REF pin and VSSA. SLES243B YUV references changed to YCbCr. Section 1, Trademarks added. Table 2-1, XTAL_IN, XTAL_REF, and XTAL_OUT terminal descriptions moved to Analog Section. Section 3.1.2, Analog Video Input Clamping description changed. Section 3.9.4, Analog Audio Input Clamping description added. Section 3.11, Clock Circuit description changed. SLES243C Section 1.5, Trademarks added. Section 1.6, Document Conventions added. Section 1.7, Package options added. Section 3.9.3, Serial Audio Interface added. Figure 3-18, Serial Audio Interface Timing Diagram added. Table 4-14, Luminance Brightness description modified. Table 4-15, Luminance Contrast description modified. Table 4-16, Brightness and Contrast Range Extender register added. Table 4-17, Chrominance Saturation description modified. Table 4-65, Interrupt Control register added. Minor editorial changes throughout. SLES243D AEC-Q100 qualification added. Section 3.8.3.3, Added comment about INTREQ outputs in video cascade mode Section 3.10.3, Added VBUS access information. Table 4-1, Added VBUS data and address registers. Table 4-89, Added VBUS data register description. Table 4-90, Added VBUS address register description. Table 3-5, Added output format settings for I2C address B0h. Table 3-6, Added output format settings for I2C address B0h. Table 3-10, Combined original Table 3-11 with Table 3-10. Table 3-10, Added output format settings for I2C address B0h. Section 3.8.3.4, Added Hybrid Mode section. Table 3-11, Added default super-frame output format table. Figure 3-15, Made minor editorial changes. Figure 3-16, Made minor editorial changes. Table 4-1, Added super-frame EAV2SAV and SAV2EAV duration status (D0h-D3h) Table 4-43, Modified TV/VCR mode detection description. Table 4-19, Modified definition for color killer threshold control. Table 4-43, Deleted obsolete stable sync control bits. Table 4-50, Changed the default value for I2C address 88h from 00h to 03h. Table 4-86, Added super-frame EAV2SAV duration status (subaddress: D0h-D1h) Table 4-87, Added super-frame SAV2EAV duration status (subaddress: D2h-D3h) Section 5.11, Modified package thermal specifications. Minor editorial changes throughout Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 Application Information 101 TVP5158, TVP5157, TVP5156 SLES243G - JULY 2009 - REVISED APRIL 2013 www.ti.com REVISION SLES243E COMMENTS Table 4-1, Added RAM version MSB and LSB registers (subaddress: 05h-06h). Table 4-6, Added RAM version MSB register (subaddress: 05h). Table 4-7, Added RAM version LSB register (subaddress: 06h). Section 5.1, Updated VESD limits. SLES243F Table 3-11, Super-frame format and timing information modified. Table 3-10, 6-Ch Half-D1, 6-Ch Half-D1 + 1-Ch D1 and 3-Ch D1 formats added Table 3-12, Added BOP and EOP bits. Table 3-13, Added definitions for BOP and EOP bits. Table 4-1, Changed default setting for I2C register AEh from 00h to 01h. Table 4-1, Corrected register name for I2C register 06h. Table 4-43, Definitions for bits 7 and 3 of I2C register 60h added. Table 4-52, Output timing delay control range modified. Table 4-54, Register settings for several different screen colors provided. Table 4-63, YCbCr output code range modified. Table 4-67, Embedded sync offset control range modified. Table 4-69, Definition for bit 7 of I2C register B1h modified. Table 4-70, Definition for bit 7 of I2C register B2h added. Table 4-75, Definition for bits 7:5 of I2C register B9h added. Table 4-77, 11.025kHz, 12kHz, 22.05kHz and 24kHz audio sample rates added. Table 4-82, Definition for bits 3:0 of I2C register C5h modified. Table 4-91, Definition for bits 5:0 of I2C register F2h modified. Table 4-92, Definition for bits 5:0 of I2C register F4h modified. Table 4-93, Definition for bits 5:0 of I2C register F6h modified. SLES243G 102 Section 3.6, Changed I2C addresses shown for Noise Reduction registers Application Information Copyright (c) 2009-2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: TVP5158 TVP5157 TVP5156 PACKAGE OPTION ADDENDUM www.ti.com 30-Aug-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) TVP5156PNP NRND HTQFP PNP 128 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR 0 to 70 TVP5156 TVP5157PNP NRND HTQFP PNP 128 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR 0 to 70 TVP5157 TVP5157PNPR NRND HTQFP PNP 128 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR 0 to 70 TVP5157 TVP5158IPNP NRND HTQFP PNP 128 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -40 to 85 TVP5158I TVP5158IPNPR NRND HTQFP PNP 128 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR -40 to 85 TVP5158I TVP5158PNP NRND HTQFP PNP 128 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR 0 to 70 TVP5158 TVP5158PNPR NRND HTQFP PNP 128 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR 0 to 70 TVP5158 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 30-Aug-2013 (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-May-2015 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TVP5157PNPR HTQFP PNP 128 1000 330.0 24.4 17.0 17.0 1.5 20.0 24.0 Q1 TVP5158IPNPR HTQFP PNP 128 1000 330.0 24.4 17.0 17.0 1.5 20.0 24.0 Q1 TVP5158PNPR HTQFP PNP 128 1000 330.0 24.4 17.0 17.0 1.5 20.0 24.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-May-2015 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TVP5157PNPR HTQFP PNP 128 1000 367.0 367.0 55.0 TVP5158IPNPR HTQFP PNP 128 1000 367.0 367.0 55.0 TVP5158PNPR HTQFP PNP 128 1000 367.0 367.0 55.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2015, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: TVP5158EVM TVP5156PNPR TVP5158IPNPRQ1