04/13/2017Page1/5

Current transformer-PACT RCP-4000A-UIRO-D190-2906233

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

Set consisting of a 4-way signal conditioner with screw connection technology and a Rogowski coil 600 mm in

length/190 mm in diameter for AC current measurement on busbars and power lines.

The signal conditioner outputs 8 different standard signals on the output side and has one switching output.

Country of origin Germany

Technical data

Measuring transducer supply

Nominal supply voltage 24 V DC

Nominal supply voltage range 9.6 V DC ... 30 V DC

Power consumption ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)

Measuring coil input data

Frequency measuring range 40 Hz ... 20000 Hz

Position error < 1 %

Linearity error 0.1 %

04/13/2017Page2/5

Current transformer-PACT RCP-4000A-UIRO-D190-2906233

Input impedance > 100 kΩ

Measuring coil signal output

Output signal (at 50 Hz) 100 mV (no load, at 1,000 A)

Output voltage (in no-load operation) VOUT = M * dI/dt

Output voltage (sinusoidal, in no-load operation) 100 mV (VOUT = 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I =

1,000 A))

Measuring transducer signal output

Current output signal 0 mA ... 20 mA (via DIP switch)

4 mA ... 20 mA (via DIP switch)

0 mA ... 10 mA (via DIP switch)

0 V ... 10.5 V (Can be set via software)

Load/output load current output ≤ 600 Ω (20 mA)

General data, measuring coil

Length of measuring coil 600 mm

Diameter of measuring coil 8.3 mm ±0.2 mm

Length of signal cable 3000 mm

Conductor structure signal line 2x 0.22 mm (Signal (tinned))

1x 0.22 mm (Shielding (tinned))

Coil material Elastollan

Housing material PC

General data for measuring transducer

Maximum transmission error ≤ 0.5 % (From the range end value)

Frequency range 16 Hz ... 1000 Hz

04/13/2017Page3/5

Current transformer-PACT RCP-4000A-UIRO-D190-2906233

Housing material PBT

Degree of protection IP20

Test voltage 3 kV (50 Hz, 1 min.)

UL, USA/Canada UL 508 Listed

General data

Standards/regulations IEC61010-1

Conductor cross section flexible max. 1.5 mm²

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 1.5 mm²

Conductor cross section AWG min. 26

Conductor cross section AWG max. 16

Screw thread M3

Connection method Screw connection

Stripping length 10 mm

Torque 0.5 Nm ... 0.6 Nm

Ambient temperature (storage/transport) -40 °C ... 80 °C (Measuring coil)

-40 °C ... 85 °C (Measuring transducer)

Maximum altitude > 4000 m

Measuring coil degree of protection IP67 (not assessed by UL)

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC

04/13/2017Page4/5

Current transformer-PACT RCP-4000A-UIRO-D190-2906233

Noise emission EN 61000-6-4

Standards/regulations IEC61010-1

Rated insulation voltage 300 V

Degree of pollution 2

Overvoltage category II

Electrical isolation Reinforced insulation in accordance with IEC 61010-1

Conformance CE-compliant

eCl@ss 5.1 27210902

eCl@ss 6.0 27210902

eCl@ss 7.0 27210902

eCl@ss 8.0 27210902

eCl@ss 9.0 27210902

04/13/2017Page5/5

Current transformer-PACT RCP-4000A-UIRO-D190-2906233

ETIM 3.0 EC002048

ETIM 4.0 EC002048

ETIM 5.0 EC002048

ETIM 6.0 EC002048