Power Transistors 2SB1504 Silicon PNP epitaxial planar type darlington Unit: mm For power switching 90 10.80.2 0.850.1 1.00.1 0.8 C Absolute Maximum Ratings Ta = 25C Parameter Symbol Rating Unit Collector-base voltage (Emitter open) VCBO -50 V Collector-emitter voltage (Base open) VCEO -50 V Emitter-base voltage (Collector open) VEBO -7 V Collector current IC -8 A Peak collector current ICP -12 A Collector power dissipation PC 1.5 W Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C 16.01.0 2.50.1 0.650.1 0.8 C 0.70.1 0.70.1 1.150.2 1.150.2 0.40.1 0.50.1 0.8 C 1 2 2.50.2 3 2.050.2 * High forward current transfer ratio hFE * High-speed switching * Allowing automatic insertion with radial taping 4.50.2 3.80.2 7.50.2 2.50.2 1: Emitter 2: Collector 3: Base MT-3-A1 Package Internal Connection C B E Electrical Characteristics Ta = 25C 3C Parameter Symbol Conditions Collector-emitter voltage (Base open) VCEO IC = -30 mA, IB = 0 Collector-base cutoff current (Emitter open) ICBO VCB = -50 V, IE = 0 Emitter-base cutoff current (Collector open) IEBO VEB = -7 V, IC = 0 Forward current transfer ratio hFE1 * VCE = -3 V, IC = -4 A 1 000 500 hFE2 VCE = -3 V, IC = -8 A Collector-emitter saturation voltage VCE(sat) IC = -4 A, IB = -8 mA Base-emitter saturation voltage VBE(sat) IC = -4 A, IB = -8 mA Min Typ Max Unit -100 A -50 V -2 mA 10 000 -1.5 V -2.0 V fT VCB = -10 V, IE = 0.5 A, f = 200 MHz 20 Turn-on time ton IC = -4 A, IB1 = -8 mA, IB2 = 8 mA 0.5 s Storage time tstg VCC = -50 V 2.0 s 1.0 s Transition frequency Fall time tf MHz Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank P hFE1 1 000 to 2 500 Publication date: April 2003 Q R 2 000 to 5 000 4 000 to 10 000 SJD00080BED 1 2SB1504 PC Ta IC VCE VCE(sat) IC -8 -100 TC=25C 1.6 Collector current IC (A) 1.2 0.8 IB=-2.0mA -1.8mA -1.6mA -1.4mA -1.2mA -1.0mA -6 -4 -0.8mA -0.6mA -0.4mA -2 0.4 -0.2mA 0 0 40 80 120 0 160 Ambient temperature Ta (C) -1 0 Forward current transfer ratio hFE Base-emitter saturation voltage VBE(sat) (V) -10 TC=-25C 25C 100C -1 -1 -4 TC=100C 25C 103 -1 -10 t=10ms t=300ms - 0.1 103 102 10 1 - 0.1 -1 -10 -100 Collector-base voltage VCB (V) -1 000 Without heat sink 103 102 10 1 10-1 10-4 10-3 10-2 10-1 1 Time t (s) Collector-emitter voltage VCE (V) 2 IE=0 f=1MHz TC=25C 104 Thermal resistance Rth (C/W) Collector current IC (A) t=1ms -100 -10 Rth t IC -10 -1 104 Collector current IC (A) ICP - 0.01 -1 -25C Cob VCB -25C 102 - 0.1 -10 Non repetitive pulse TC=25C -1 -1 Collector current IC (A) VCE=-3V Safe operation area -10 25C TC=100C - 0.1 - 0.1 -5 104 Collector current IC (A) -100 -10 hFE IC 105 IC/IB=500 - 0.1 - 0.1 -3 IC/IB=500 Collector-emitter voltage VCE (V) VBE(sat) IC -100 -2 Collector output capacitance C (pF) (Common base, input open circuited) ob Collector power dissipation PC (W) Without heat sink Collector-emitter saturation voltage VCE(sat) (V) 2.0 SJD00080BED 10 102 103 104 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL