MTZH_Tubing FLEXIBLE NON - HALOGENATED, FLAME RETARDANT HARNESS, HEAT - SHRINKABLE TUBING Table 1: Dimensions Size 1/8 3/16 1/4 3/8 1/2 3/4 1 1-1/2 2 As Supplied Inside Diameter Minimum (D) in. mm. .125 3.17 .187 4.74 .250 6.35 .420 10.70 .500 12.70 .750 19.10 1.000 25.40 1.500 38.10 2.000 50.80 Recovered Wall Thickness (W) Minimum Maximum in. mm. in. mm. .025 0.64 .035 0.89 .029 0.74 .042 1.06 .029 0.74 .042 1.06 .029 0.74 .042 1.06 .029 0.74 .042 1.06 .035 0.89 .049 1.24 .038 0.96 .060 1.52 .042 1.06 .069 1.75 .050 1.27 .080 2.03 Inside Diameter Maximum (d) in. mm. .062 1.57 .094 2.36 .125 3.18 .187 4.75 .250 6.35 .375 9.53 .500 12.70 .750 19.10 1.000 25.40 Table 2: Properties Property Dimensions Longitudinal Change Tensile Strength Ultimate Elongation Secant Modulus @ 2% Strain (recovered) Dielectric Strength Unit inch Percent PSI Percent PSI V/mil Requirement Table 1 0 to -10 1250 min 200 min 19,000 max 300 min Test Method ASTM-D2671 ASTM-D2671 ASTM-D2671 ASTM-D2671 ASTM-D2671 ASTM-D2671 Notes: 1. For sizes greater than 1/2", use Die D specimens 2. The properties listed above are acceptance tests 3. Color: Black with a 1/8 inch wide continuous yellow stripe inverse imprinted with the word "Raychem" approximately every 0.7 inch. CUSTOMER DRAWING Raychem Tubing 305 Constitution Drive, Menlo Park, CA 94025 Unless otherwise specified dimensions are in inches. [Metric dimensions are shown in brackets TOLERANCES: ANGLES: N/A Tyco Electronics reserves the 0.00 N/A right to amend this drawing at 0.0 N/A ROUGHNESS any time. Users should 0 N/A IN MICRON evaluate the suitability of the product for their application. REVISED BY: YUNGUYEN CAGE CODE: ECO NUMBER: TITLE: MTZH TUBING FLEXIBLE NON - HALOGENATED FLAME RETARDANT HARNESS, HEAT SHRINKABLE TUBING DOCUMENT NO.: MTZH_Tubing REV: DATE: January 6, 2009 D SCALE: 06090 None ECO-08-032007 (c) 1997-2009 Tyco Electronics Corporation. All rights reserved If this document is printed it becomes uncontrolled. Check for the latest revision. SIZE A SHEET: 1 of 1