CUSTOMER DRAWING
Raychem Tubing
305 Constitution Drive,
Menlo Park, CA 94025
Unless otherwise specified dimensions are in inches.
[Metric dimensions are shown in brackets
TITLE: MTZH TUBING
FLEXIBLE NON – HALOGENATED
FLAME RETARDANT HARNESS,
HEAT SHRINKABLE TUBING
DOCUMENT NO.: MTZH_Tubing
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the
right to amend this drawing at
any time. User s should
evaluate the suitability of the
product for their application.
REV:
D
DATE: January 6, 2009
REVISED BY:
YUNGUYEN CAGE CODE:
06090 ECO NUMBER:
ECO-08-032007 SCALE: None SIZE
A SHEET: 1 of 1
© 1997-2009 Tyco Electronics Corporation. All rights reserved
If this document is printed it becomes uncontrolled. Check for the latest revision.
MTZH_Tubing
FLEXIBLE NON – HALOGENATED, FLAME RETARDANT HARNESS, HEAT - SHRINKABLE TUBING
Table 1: Dimensions
As Supplied Recovered
Inside Diameter Inside Diameter Wall Thickness (W)
Size Minimum (D) Maximum (d) Minimum Maximum
in. mm. in. mm. in. mm. in. mm.
1/8 .125 3.17 .062 1.57 .025 0.64 .035 0.89
3/16 .187 4.74 .094 2.36 .029 0.74 .042 1.06
1/4 .250 6.35 .125 3.18 .029 0.74 .042 1.06
3/8 .420 10.70 .187 4.75 .029 0.74 .042 1.06
1/2 .500 12.70 .250 6.35 .029 0.74 .042 1.06
3/4 .750 19.10 .375 9.53 .035 0.89 .049 1.24
1 1.000 25.40 .500 12.70 .038 0.96 .060 1.52
1-1/2 1.500 38.10 .750 19.10 .042 1.06 .069 1.75
2 2.000 50.80 1.000 25.40 .050 1.27 .080 2.03
Table 2: Properties
Property Unit Requirement Test Method
Dimensions inch Table 1 ASTM-D2671
Longitudinal Change Percent 0 to -10 ASTM-D2671
Tensile Strength PSI 1250 min ASTM-D2671
Ultimate Elongation Percent 200 min ASTM-D2671
Secant Modulus @ 2% Strain (recovered) PSI 19,000 max ASTM-D2671
Dielectric Strength V/mil 300 min ASTM-D2671
Notes:
1. For sizes greater than 1/2", use Die D specimens
2. The properties listed above are acceptance tests
3. Color: Black with a 1/8 inch wide continuous yellow stripe inverse imprinted with the word "Raychem"
approximately every 0.7 inch.
