Features * * * * * * Regulated Converter 2:1 input voltage range 1.6kVDC isolation UL60950-1 certified Efficiency up to 87% Low profile, 10.2mm height Over current protection Description The RP08-A series DC/DC converters are certified to UL60950-1 and cUL60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. DC/DC Converter RP08-A 8 Watt DIP24/SMD Single and Dual Output Selection Guide Part Number Input Output Output Input (1)Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load (2) [VDC] [VDC][mA][mA] [%] [F] RP08-123.3SA (3) 9-18 3.3 2000 688 80 3300 RP08-1205SA (3) 9-18 5 1500753 83 1600 RP08-1212SA (3) 9-18 12 666 757 88 350 RP08-1215SA (3) 9-18 15 533 766 87 240 RP08-243.3SA (3) 18-36 3.3 2000 344 80 3300 RP08-2405SA (3) 18-36 5 1500377 83 1600 RP08-2412SA (3) 18-36 12 666387 86 350 RP08-2415SA (3) 18-36 15 533392 85 240 RP08-483.3SA (3) 36-75 3.3 2000 172 80 3300 RP08-4805SA (3) 36-75 5 1500188 83 1600 RP08-4812SA (3) 36-75 12 666 194 86 350 RP08-4815SA (3) 36-75 15 533 194 86 240 RP08-1205DA (3) 9-18 5 800 803 83 1000 RP08-1212DA (3) 9-18 12 333 766 87 160 RP08-1215DA (3) 9-18 15 267 785 85 100 RP08-2405DA (3) 18-36 5 800407 82 1000 RP08-2412DA (3) 18-36 12333387 86 160 RP08-2415DA (3) 18-36 15 267 393 85 100 RP08-4805DA (3) 36-75 5 800196 85 1000 RP08-4812DA (3) 36-75 12 333 191 87 160 RP08-4815DA (3) 36-75 15 267 192 87 100 Notes: Note1: Maximum values at nominal input voltage and full load Note2: Max. Cap load is tested at minimum Input and constant resistive load E196683 UL60950-1 certified EN55032 compliant Model Numbering RP08-__ __ _A/_ nom. Input Voltage "Package (3)" nom. Output Voltage Single or Dual Notes: Note3: no suffix for standard DIP24 package add suffix "/SMD" for SMD package Ordering Examples RP08-4805SA/SMD = 48V Input, 5V Output, Single, SMD Package RP08-1205DA = 12V Input, 5V Output, Dual, DIP24 Package www.recom-power.com REV.: 3/2019 PD-1 RP08-A DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. nom. Vin = 12VDC nom. Vin = 24VDC nom. Vin = 48VDC 9VDVC 18VDC 36VDC 12VDC 24VDC 48VDC Max. Input Filter Input Voltage Range Input Surge Voltage Pi-Type 18VDC 36VDC 75VDC 36VDC 50VDC 100VDC nom. Vin = 12VDC nom. Vin = 24VDC nom. Vin = 48VDC 100ms max. Input Reflected Ripple Current 20mAp-p Power up ON/OFF CTRL Start-up time 700ms 5ms Operating Frequency Range 270kHz Minimum Load (4) 300kHz 330kHz 10% DC-DC ON DC-DC OFF Positive Logic ON/OFF CTRL (5) Open or 3.0VDC < VCTRL < 12VDC Short or 0VDC < VCTRL < 1.2VDC -0.5mA +0.5mA Input Current of CTRL pin DC-DC ON Standby Current DC-DC OFF 2.5mA Ripple and Noise 20MHz BW 50mVp-p Notes: Note4: The RP08 series requires a minimum of 10% loading on the output to maintain specified regulation Operation under no-load condition will not damage these devices, however they may not meet all listed specification Note5: The pin voltage is referenced to -Vin pin RP08-1205SA Efficiency vs. Output Current 95 Efficiency vs. Input Voltage 90 90 85 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 80 75 70 55 9Vin 12Vin 18Vin 50 45 40 10 20 30 40 50 60 70 80 65 60 90 100 9 10 11 12 13 14 15 16 17 18 Input Voltage [VDC] Output Current [%] continued on next page www.recom-power.com REV.: 3/2019 PD-2 RP08-A DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) RP08-2405SA Efficiency vs. Output Current 95 Efficiency vs. Input Voltage 90 90 85 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 18Vin 24Vin 36Vin 50 45 40 80 75 70 65 60 10 20 30 40 50 60 70 90 80 100 18 20 22 24 26 28 30 32 34 36 72 75 Input Voltage [VDC] Output Current [%] RP08-4805SA Efficiency vs. Output Current 95 Efficiency vs. Input Voltage 90 90 85 80 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 75 70 36Vin 48Vin 75Vin 50 45 65 40 10 20 30 40 50 60 70 80 90 60 100 36 Output Current [%] 40 44 48 52 56 60 66 Input Voltage [VDC] REGULATIONS Parameter Condition Value Output Accuracy Line Regulation Load Regulation Cross Regulation Transient Response Recovery Time www.recom-power.com 1.0% max. low line to high line, full load 0.2% max. Single (0% to 100% load) DIP24 SMD 0.5% 1.0% Dual (0% to 100% load) DIP24, SMD 1.0% asymmetrical 25%<>100% load 25% load step change REV.: 3/2019 5.0% 200s typ. PD-3 RP08-A DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Load Protection (OLP) % of Iout rated 150% typ. DIP24 I/P to O/P; I/P (O/P) to case 1.6kVDC/1 minute SMD I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.0kVDC/1 minute Isolation Voltage (6) Isolation Resistance Viso= 500VDC 1G min. Isolation Capacitance 300pF max. Notes: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note7: This power module is not internally fused. An input line fuse must always be used Recom suggests: 12Vin=T2A; 24Vin=T1A; 48Vin=T0.5A slow blow ENVIRONMENTAL Parameter Condition Value without derating with derating Operating Temperature Range -40C to +80C -40C to +100C Maximum Case Temperature +100C Temperature Coefficient 0.02%/K max. Thermal Impedance @ natural convection 0.1m/s 20K/W typ. Operating Altitude 4000m Operating Humidity non-condensing 5% - 95% RH Pollution Degree PD2 Shock according to MIL-STD-810F Vibration according to MIL-STD-810F 3543 x 103 hours 3165 x 10 hours MIL-HDBK-217F, G.B. BELLCORE TR-NWT-000332 (8) MTBF Derating Graph (9) RP08-1212SA Output Power [%] 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] Notes: Note8: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment) Note9: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact RECOM Techsupport for detailed information www.recom-power.com REV.: 3/2019 PD-4 RP08-A DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Condition Information Technology Equipment, General Requirements for Safety Standard UL60950-1, 2nd Edition, 2014 C22.2 No. 60950-1-07, 2nd Edition, 2014 E196683 EAC RU-AT.49.09571 TP TC 004/2011 RoHS2 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Standard / Criterion Electromagnetic compatibility of multimedia equipment - Emission requirements with external filter (see filter suggestion below) EN55032, Class A and B ESD Electrostatic discharge immunity test Air 8kV and Contact 6kV EN61000-4-2, Criteria A 10 V/m EN61000-4-3, Criteria A 2kV EN61000-4-4, Criteria A 1kV EN61000-4-5, Criteria A 10 Vr.m.s EN61000-4-6, Criteria A 100A/m continuous; 1000A/m 1s EN61000-4-8, Criteria A Radiated, radio-frequency, electromagnetic field immunity test Fast Transient and Burst Immunity (10) Surge Immunity (10) Immunity to conducted disturbances, induced by radio-frequency fields Power Magnetic Field Immunity Notes: Note10: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5 Recom suggests Nippon chemi-con KY series 220F/100V EMC Filtering Suggestions according to EN55032 Single C2 F1 +Vin +Vin C2 +Vout +Vout Dual F1 +Vin +Vin C1 C1 C2 -Vin -Vin C2 -Vout -Vout F1 +Vin +VinC3 -Vin -Vin +Vout +Vout +Vin +Vin C3 N/A 1000pF/2kV, 1206 MLCC +Vin L1 F1 N/A +Vin L1 F1 -Vin 1000pF/2kV, 1206 MLCC +VinC4 C1 -Vout +Vout -Vin C2 +Vout +Vin C2 L1 F1 -Vin Dual Com Com -Vout +VinC4 C1 +Vout +Vout C3 -Vout -Vout +Vout C2 Com -Vin -Vin -Vout -Vout -Vin -Vin C4 -Vout C3 +Vin C1 Single 3 C3 -Vin Com -Vout in 1000pF/2kV,C 1206 MLCC +Vout C2 -V C2/C3 -Vin 4.7F/25V, 1210 MLCC RP08-48xxS_DA, RP08-48xxS_DA/SMD +Vout +Vin C1 C1 -Vout RP08-24xxS_DA, RP08-24xxS_DA/SMD L1 F1 +Vout +Vout Com RP08-12xxS_DA, RP08-12xxS_DA/SMD C 3 -Vout C1 -Vout in -Vout +VinC3 C1 MODEL -V Com Com F1 Component List Class A -Vin +Vout +Vout -Vout +Vout Com -Vout C4 Component List Class B MODEL C1 C3/C4 L1 N/A 1000pF/2kV, 1206 MLCC CMC :325H ref: WE 744290321 or CMC-06 6.8F/50V, 1812 MLCC N/A 1000pF/2kV, 1206 MLCC CMC: 325H ref: WE 744290321 or CMC-06 2.2F/100V, 1812 MLCC 2.2F/100V, 1812 MLCC 1000pF/2kV, 1206 MLCC CMC: 325H ref: WE 744290321 or CMC-06 RP08-12xxS_DA RP08-12xxS_DA/SMD 4.7F/25V, 1210 MLCC RP08-24xxS_DA RP08-24xxS_DA/SMD RP08-48xxS_DA RP08-48xxS_D/SMD www.recom-power.com C2 REV.: 3/2019 PD-5 RP08-A DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material case base potting nickel coated copper non-conductive black plastic epoxy (UL94 V-0) Dimensions (LxWxH) DIP24 SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 11.2mm Weight DIP24 SMD 16g 18g DIP24 Dimension Drawing (mm) Pin Connections DIP24 20.3 10.2 31.8 Pin # 1 2 3 9 11 14 16 22 23 2.0 Recommended Footprint Details 8 x 2.54= 20.32 2.54 11 Bottom View 23 22 16 23 22 14 2.54 9 2.54 O0.8+0.15/-0 5.08 15.24 1 2 3 2.5 O0.50.1 3.8 10 x 2.54= 25.40 16 14 9 11 Dual CTRL -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC = No Connection Pin Pitch Tolerance 0.25mm xx.x = 0.5mm xx.xx = 0.25mm Top View 1 2 3 Single CTRL -Vin -Vin NC NC +Vout -Vout +Vin +Vin SMD Dimension Drawing (mm) Pin Connections SMD 20.3 11.2 10.9 32.0 25.4 10.16 2.54 0.500.1 9 10 11 12 Bottom View 24 23 22 21 20 16 15 14 13 26.4 1 2 3 4 5 2.54 1.50 24 23 22 21 20 16 15 14 13 Top View 1 2 3 4 5 9 10 11 12 2.00 Recommended Footprint Details Pin # 1 2 3 9 11 14 16 22 23 Others Single CTRL -Vin -Vin NC NC +Vout -Vout +Vin +Vin NC Dual CTRL -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC NC = No Connection Pin Pitch Tolerance 0.25mm xx.x = 0.5mm xx.xx = 0.25mm 11 x 2.54 = 27.94 www.recom-power.com REV.: 3/2019 PD-6 RP08-A DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Packaging Quantity Type DIP24 SMD tube DIP24, SMD Storage Temperature Range Storage Humidity Value 255.0 x 23.0 x 19.0mm 255.0 x 32.0 x 16.0mm 7pcs -55C to +125C non-condensing 5% - 95% RH The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 3/2019 PD-7