Energy-saving axial fans version 03/2009
The engineer’s choice
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 1
2
New energy-saving axial fans
The new generation of compact energy-saving axial fans
In almost all spheres of life, energy savings have become an important issue by now. Our new and
compact axial fans are based on the energy-saving motor (ESM) and offer high efficiency and thus
considerable energy savings and improved service life at the same time - aspects which are defini-
tely called for with refrigeration plants, such as refrigerated display cases or refrigeration chests or
condensing units.
The axial fan W1G 200 already established quite successfully on the market has now been comple-
mented by the sizes 172, 230, 250 and 300 mm. The new plastic rotor was optimised to meet
improved aerodynamic criteria and makes these fans operate even more quietly. What is more, they
environment benefits from the fact that no varnish needs to be used any more!
Compared to conventional shaded pole motors, energy-saving motors are three times as efficient.
Higher efficiency translates into less intrinsic heat generated during operation, with a reduced need
to dissipate heat and putting a strain on the environment. This results in further energy savings, as
less refrigeration capacity has to be applied in the first instance.
The new and compact energy-saving axial fans, with an output power of between 5 and 20 W, can
be easily connected via a plug-in connection. Moreover, the motor speed can be optionally set via
programming interface. A second speed step - e.g. for night setback, can be realised via actuator
input.
The energy-saving fans are robust, maintenance-free and durable. Their service life is rated at more
than 40,000 hours, equalling continuous operation of more than 4.5 years. As regards environ-
mental impacts, their design complies with protection type IP 54 specifications. Optionally, protec-
tion type IP 65 is available. Moreover, these energy-saving axial fans comply with protection class 2.
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 2
3
Size 172 4
New energy-saving axial fans 2
Size 200 6
Size 230 12
Size 250 14
Connection leads 20
Table of content
ebm-papst representatives & subsidiaries 22
Size 300 16
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 3
4
– Material: Wall ring: Plastic PP
Blade: Plastic PA
– Number of blades: 5
– Direction of air flow: "V", exhaust over
struts
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE;
UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
W1G172-EC95 -01 M1G 055-BD
VAC Hz rpm W A Pa °C kg
115 50/60 2400 22 0,34 55 -30..+50 0,95
W1G172-EC91 -01 M1G 055-BD 230 50/60 2400 22 0,17 55 -30..+50 0,95
Motor
A
B
Energy-saving axial fans
Ø 172
Nominal data
Type
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
subject to alterations (1) Nominal data in operating point with maximum load and 115 or 230 VAC
1
2
3
4
6
7
8
5
50 100 150 200 250 300 350 400 450
050 [CFM]100 150 200 250
[Pa]
0,04 0,08 0,12 [in H2O]0,16 0,20 0,24
[m3/h]
n max. = 2400 min-1 n min. = 900 min-1
n = 1500 min-1
10
20
30
40
50
60
A1
2
3
4
5
6
7
8
A
A
A
A
A
A
A
A
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
Curves n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
2400
2400
2400
2400
1500
1500
1500
1500
19
21
22
22
8
8
9
9
0,30
0,32
0,34
0,34
0,12
0,14
0,14
0,14
53
53
53
53
42
43
43
44
2400
2400
2400
2400
1500
1500
1500
1500
19
21
22
22
8
8
9
9
0,15
0,16
0,17
0,17
0,06
0,07
0,07
0,07
53
53
53
53
42
43
43
44
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 4
5
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Connection lead
p. 20
450+20
40±5
6
4
78.5
35 4x Ø4.3
Ø192
Ø172
Ø208
Ø222
❮"V"
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 5
6
– Material: Wall ring: Plastic PP
Blade: Plastic PA
– Number of blades: 5
– Direction of air flow: "V", exhaust over
struts
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE;
UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
W1G200-EC91 -27 M1G 055-BD
VAC Hz rpm W A Pa °C kg
115 50/60 1300 8,0 0,11 24 -30..+50 1,0
W1G200-EC87 -25 M1G 055-BD 230 50/60 1300 8,5 0,07 24 -30..+50 1,0
Motor
1
2
3
4
6
7
8
5
100 200 300 400
050 [CFM]100 150 200 250
[Pa]
5
0,02 0,04 0,06 [in H2O]0,08 0,10
[m3/h]
n max. = 1300 min-1 n min. = 500 min-1
n = 900 min-1
10
15
20
25
Curves
A
B
Energy-saving axial fans
Ø 200
Nominal data
Type
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
A
subject to alterations (1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
B
1
2
3
4
5
6
7
8
1300
1300
1300
1300
900
900
900
900
7
8
8
8
3
4
4
4
0,09
0,10
0,10
0,11
0,05
0,05
0,05
0,05
A
A
A
A
A
A
A
A
42
41
41
42
33
32
32
33
1
2
3
4
5
6
7
8
1300
1300
1300
1300
900
900
900
900
7
8
8,5
8,5
3
4
4
4
0,06
0,07
0,07
0,07
0,03
0,04
0,04
0,04
B
B
B
B
B
B
B
B
42
41
41
42
33
32
32
33
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 6
7
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Connection lead
p. 20
Ø220
Ø200
Ø236
Ø250
4x Ø4.3
6
40±5
450+20
4
40
78.5
❮"V"
ESM_englisch_03_2009:Axial_D 09.03.2009 14:40 Seite 7
8
– Material: Wall ring: Plastic PP
Blade: Plastic PA
– Number of blades: 5
– Direction of air flow: "V", exhaust over
struts
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE;
UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
W1G200-EC95 -47 M1G 055-BD
W1G200-EC91 -45 M1G 055-BD
Motor
1
2
3
4
6
7
8
5
100 200 300 400 500 600 700
050 [CFM]100 150 200 250 300 350 400
[Pa]
0,04 0,08 0,12 [in H2O]0,16 0,20 0,24
[m3/h]
n max. = 2100 min-1 n min. = 800 min-1
n = 1500 min-1
10
20
30
40
50
60
Curves
Energy-saving axial fans
Ø 200
Nominal data
Type
A
subject to alterations (1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
1
2
3
4
5
6
7
8
A
A
A
A
A
A
A
A
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
VAC Hz rpm W A Pa °C kg
115 50/60 2100 31 0,48 55 -30..+50 1,0
230 50/60 2100 31 0,24 55 -30..+50 1,0
A
B
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
2100
2100
2100
2100
1500
1500
1500
1500
29
30
31
31
14
16
16
16
0,44
0,46
0,48
0,48
0,22
0,24
0,26
0,26
55
54
53
55
46
45
45
46
2100
2100
2100
2100
1500
1500
1500
1500
29
30
31
31
14
16
16
16
0,22
0,23
0,24
0,24
0,11
0,12
0,13
0,13
55
54
53
55
46
45
45
46
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 8
9
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Connection lead
p. 20
Ø220
Ø200
Ø236
Ø250
4x Ø4.3
6
40±5
450+20
4
40
78.5
❮"V"
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 9
10
– Material: Blade: Plastic PA
Guard grille: Plastic PP
– Number of blades: 5
– Direction of air flow: "A", intake over
guard grille
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE; UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
S1G 200-CA95 -02 M1G 055-BD
S1G 200-CA91 -02 M1G 055-BD
Motor
1
2
3
4
6
7
8
5
100 200 300 400 500 600 700
050 [CFM]100 150 200 250 300 350 400
[Pa]
0,04 0,08 0,12 [in H2O]0,16 0,20
[m3/h]
n max. = 2000 min-1 n min. = 800 min-1
n = 1500 min-1
10
20
30
40
50
Curves
Energy-saving axial fans
Ø 200
Nominal data
Type
A
subject to alterations (1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
1
2
3
4
5
6
7
8
2000
2000
2000
2000
1500
1500
1500
1500
30
30
30
31
17
18
19
20
0,43
0,43
0,43
0,43
0,29
0,29
0,29
0,29
A
A
A
A
A
A
A
A
54
54
53
54
50
50
49
50
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
2000
2000
2000
2000
1500
1500
1500
1500
32
33
33
33,5
18
19
19
20
0,24
0,25
0,25
0,25
0,16
0,16
0,16
0,16
54
54
53
54
50
50
49
50
VAC Hz rpm W A Pa °C kg
115 50/60 2000 31 0,43 45 -30..+50 0,95
230 50/60 2000 33,5 0,25 45 -30..+50 0,95
A
B
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 10
11
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Connection lead
p. 20
450+20
40±5
6
37.5
Ø200
40 38.5
3
Ø260
Ø278
4x Ø6.5
"A" ❯
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 11
12
Energy-saving axial fans
Ø 230
1
2
3
4
6
7
8
5
200 400 600 800
0 [CFM]100 200 300 500400
[Pa]
0,04 0,08 0,12 [in H2O]0,16
[m3/h]
n max. = 1500 min-1 n min. = 700 min-1
n = 1000 min-1
10
20
30
40
Curves
subject to alterations
W1G230-EB97 -01 M1G 055-BD
W1G230-EB89 -01 M1G 055-BD
Motor
Nominal data
Type
– Material: Wall ring: Plastic PP
Blade: Plastic PA
– Number of blades: 5
– Direction of air flow: "V", exhaust over
struts
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE;
UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
A
(1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
1
2
3
4
5
6
7
8
A
A
A
A
A
A
A
A
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
1500
1500
1500
1500
1000
1000
1000
1000
24
25
25
26
10
11
11
11
0,19
0,19
0,19
0,20
0,09
0,09
0,09
0,09
51
51
50
50
39
39
40
40
VAC Hz rpm W A Pa °C kg
115 50/60 1500 23 0,35 38 -30..+50 1,05
230 50/60 1500 26 0,20 38 -30..+50 1,05
A
B
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
1500
1500
1500
1500
1000
1000
1000
1000
23
23
23
23
9
10
10
10
0,35
0,35
0,35
0,35
0,15
0,16
0,16
0,16
51
51
50
50
39
39
40
40
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 12
13
Connection lead
p. 20
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
78.5
50
4
450+20
40±5
6
Ø250
4x Ø4.3
Ø230
Ø266
Ø280
❮"V"
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 13
14
Energy-saving axial fans
Ø 250
1
2
3
4
6
7
8
5
200 400 600 800 1000
0 [CFM]100 200 300 500400
[Pa]
0,04 0,08 0,12 [in H2O]0,16
[m3/h]
n max. = 1700 min-1 n min. = 900 min-1
n = 1200 min-1
10
20
30
40
Curves
subject to alterations
W1G250-BB21 -01 M1G 055-BI
W1G250-BB17 -01 M1G 055-BI
Motor
Nominal data
Type
– Material: Wall ring: Plastic PP
Blade: Plastic PA
– Number of blades: 5
– Direction of air flow: "V", exhaust over
struts
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
A
(1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
1
2
3
4
5
6
7
8
1700
1700
1700
1700
1200
1200
1200
1200
30
31
32
32
14
15
16
17
0,44
0,45
0,47
0,47
0,22
0,24
0,25
0,26
A
A
A
A
A
A
A
A
55
56
56
57
46
46
47
48
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
1700
1700
1700
1700
1200
1200
1200
1200
30
31
32
32
14
15
16
17
0,24
0,24
0,24
0,24
0,12
0,13
0,14
0,14
55
56
56
57
46
46
47
48
VAC Hz rpm W A Pa °C kg
115 50/60 1700 32 0,47 42 -30..+50 1,55
230 50/60 1700 32 0,24 42 -30..+50 1,55
A
B
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 14
15
Connection lead
p. 20
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Ø295
Ø315
450+20
40±5
6
Ø250
45˚
4x90˚
296
4xØ7
Ø280
80
92
4
❮"V"
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 15
16
Energy-saving axial fans
Ø 300
1
2
3
4
6
7
8
5
200 400 600 800 1000 1200
0 [CFM]100 200 300 500400 600 800700
[Pa]
0,04 0,08 0,12 [in H2O]0,14
[m3/h]
n max. = 1300 min-1 n min. = 700 min-1
n = 900 min-1
10
0,06
15
0,02
5
20
0,10
25
30
35
Curves
Nominal data
Type
subject to alterations
W1G300-BB23 -01 M1G 055-BI
W1G300 -BB19 -01 M1G 055-BI
Motor
– Material: Wall ring: Plastic PP
Blade: Plastic PA
– Number of blades: 5
– Direction of air flow: "V", exhaust over
struts
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
A
(1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
1
2
3
4
5
6
7
8
1300
1300
1300
1300
900
900
900
900
28
31
32
35
12
14
15
16
0,41
0,46
0,47
0,50
0,24
0,26
0,28
0,30
A
A
A
A
A
A
A
A
52
52
51
52
43
42
42
43
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
1300
1300
1300
1300
900
900
900
900
32
34
34
35
13
14
15
16
0,25
0,27
0,27
0,27
0,12
0,13
0,14
0,15
52
52
51
52
43
42
42
43
VAC Hz rpm W A Pa °C kg
115 50/60 1300 35 0,50 35 -30..+50 1,75
230 50/60 1300 35 0,27 35 -30..+50 1,75
A
B
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 16
17
Connection lead
p. 20
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Ø380
Ø397
4xØ6.3
4x90˚
45˚
360
Ø300
40±5
6
450+20
Ø350
4
92
80
❮"V"
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 17
18
– Material: Blade: Plastic PA
Guard grille: Plastic PP
– Number of blades: 5
– Direction of air flow: "A", intake over
guard grille
– Direction of rotation: Counter-clockwise
seen on rotor
– Type of protection: IP 54
– Insulation class: "B"
– Mounting position: Any
– Condensate discharges: None
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Motor protection: Via electronics and TOP
– Electrical connection: Line cord with plug
– Protection class: II
– Product conforming to standard: CE
– Approvals: VDE, UL, CSA is applied for
– Speed: Using the programming unit,
2 speeds between nmin and nmax can be
programmed.
Energy-saving axial fans
Ø 300
1
2
3
4
6
7
8
5
200 400 600 800 1000
0 [CFM]100 200 300 500400 600
[Pa]
0,04 0,08 0,12 [in H2O]0,16
[m3/h]
n max. = 1200 min-1 n min. = 700 min-1
n = 900 min-1
10
20
30
40
Curves
Nominal data
Type
subject to alterations
S1G 300-CA23 -02 M1G 055-BI
S1G 300-CA19 -02 M1G 055-BI
Motor
A
(1) Nominal data in operating point with maximum load and 115 or 230 VAC
n
[rpm]
P1
[W]
I
[A]
LpA
[dB(A)]
1
2
3
4
5
6
7
8
1200
1200
1200
1200
900
900
900
900
24
27
31
35
16
18
19
21
0,40
0,44
0,50
0,56
0,30
0,34
0,36
0,40
A
A
A
A
A
A
A
A
54
53
54
54
51
50
49
49
B
1
2
3
4
5
6
7
8
B
B
B
B
B
B
B
B
1200
1200
1200
1200
900
900
900
900
24
27
31
35
16
18
19
21
0,20
0,22
0,25
0,28
0,15
0,17
0,18
0,20
54
53
54
54
51
50
49
49
VAC Hz rpm W A Pa °C kg
115 50/60 1200 35 0,56 40 -30..+50 1,4
230 50/60 1200 35 0,28 40 -30..+50 1,4
A
B
Curve
Nominal voltage
Frequency
Speed (1)
Max. operative range
Perm. amb. temp.
Mass
Max.
Power input (1)
Max.
Current draw (1)
ESM_englisch_03_2009:Axial_D 09.03.2009 14:41 Seite 18
19
– Electr.
connection:
Power system: 115 or 230 VAC,
50/60 Hz
L1
N
black
blue
brown
1
2
5
Speed selection
115 or 230 VAC
L or N
Energy-
saving
motor
(ESM)
Connection lead
p. 20
450+20
40±5
6
Ø300
45
3
43
38
4x Ø6.5
Ø360
Ø377
"A" ❯
ESM_englisch_03_2009:Axial_D 09.03.2009 14:42 Seite 19
20
Connection leads
– Design: Cable conforms to UL standards,
sealed plug
a
31,5
22,5
7
40
27,5
10
9,3
Connection lines for energy-saving motors (ESM)
Part no.
10637-4-1040
subject to alterations
a
450
10640-4-1040 600
10638-4-1040 1500
10639-4-1040 2000
Jacketed cable, internal line
(UL Style 2464/1061)
3 x AWG20 (approx. 0.5 mm2)
Brass lead tips
ESM_englisch_03_2009:Axial_D 09.03.2009 14:42 Seite 20
21
ESM_englisch_03_2009:Axial_D 09.03.2009 14:42 Seite 21
22
ebm-papst representatives & subsidiaries
Germany
ebm-papst
Mulfingen GmbH & Co. KG
Bachmühle 2
D-74673 Mulfingen
Phone +49 (0) 79 38 / 81-0
Fax +49 (0) 79 38 / 81-110
info1@de.ebmpapst.com
www.ebmpapst.com
ebm-papst
St. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1
D-78112 St. Georgen
Phone +49 (0) 77 24 / 81-0
Fax +49 (0) 77 24 / 81-13 09
info2@de.ebmpapst.com
www.ebmpapst.com
ebm-papst
Landshut GmbH
Hofmark-Aich-Straße 25
D-84030 Landshut
Phone +49 (0) 8 71 / 707-0
Fax +49 (0) 8 71 / 707-465
info3@de.ebmpapst.com
www.ebmpapst.com
fan agent
compact fan agent
motor specialist
motor agent
Kassel
Dipl.-Ing. (FH) Ralph Brück
Hoherainstraße 38
D-35075 Gladenbach
Phone +49 (0) 64 62 / 40 71 10
Fax +49 (0) 64 62 / 40 71 11
Ralph.Brueck@de.ebmpapst.com
Koblenz
Winfried Schaefer
Hinter der Kirch 10
D-56767 Uersfeld
Phone +49 (0) 26 57 / 16 96
Fax +49 (0) 26 57 / 16 76
Winfried.Schaefer@de.ebmpapst.com
Munich
Dipl.-Wirtsch.-Ing. (FH) Jens Peter
Steinbergweg 6
D-82285 Hattenhofen
Phone +49 (0) 81 45 / 80 92 25
Fax +49 (0) 81 45 / 80 92 26
Jens.Peter@de.ebmpapst.com
Nuremberg
Friedrich Klein
Adlerstraße 49/1
D-73540 Heubach
Phone +49 (0) 71 73 / 49 83
Fax +49 (0) 71 73 / 80 53
Friedrich.Klein@de.ebmpapst.com
Offenburg
Dipl.-Ing. (FH) Ralf Braun
Hubeneck 21
D-77704 Oberkirch
Phone +49 (0) 78 02 / 98 22 52
Fax +49 (0) 78 02 / 98 22 53
Ralf.Braun@de.ebmpapst.com
Stuttgart
Dipl.-Ing. (FH) Rudi Weinmann
Hindenburgstraße 100/1
D-73207 Plochingen
Phone +49 (0) 71 53 / 92 89 80
Fax +49 (0) 71 53 / 92 89 81
Rudi.Weinmann@de.ebmpapst.com
Ulm
Günter Wilhelm
Allgäuer Straße 7
D-89269 Vöhringen
Phone +49 (0) 73 06 / 92 46 08
Fax +49 (0) 73 06 / 92 46 48
Guenter.Wilhelm@de.ebmpapst.com
Distributors
Frankfurt
R.E.D. Handelsgesellschaft mbH
Gutenbergstraße 3
D-63110 Rodgau - Jügesheim
Phone +49 (0) 61 06 / 84 10
Fax +49 (0) 61 06 / 84 11 11
info@red-elektromechanik.de
www.red-elektromechanik.de
Hamburg
Breuell + Hilgenfeldt GmbH
Grützmühlenweg 40
D-22339 Hamburg
Phone +49 (0) 40 / 53 80 92 20
Fax +49 (0) 40 / 53 80 92 84
info@breuell-hilgenfeldt.de
Munich
A. Schweiger GmbH
Ohmstraße 1
D-82054 Sauerlach
Phone +49 (0) 81 04 / 8 97 0
Fax +49 (0) 81 04 / 8 97 90
info@schweiger-gmbh.de
www.schweiger-gmbh.com
(1 to 5 pieces)
North
Breuell + Hilgenfeldt GmbH
Grützmühlenweg 40
D-22339 Hamburg
Phone +49 (0) 40 / 53 80 92 20
Fax +49 (0) 40 / 53 80 92 84
ebmpapst@breuell-hilgenfeldt.de
South
HDS Ventilatoren Vertriebs GmbH
Glaswiesenstraße 1
D-74677 Dörzbach
Phone +49 (0) 79 37 / 80 29 68
Fax +49 (0) 79 37 / 80 25 78
info@hds-gmbh.net
Agencies
Berlin
Dipl.-Ing. (TH) Jens Duchow
Händelstraße 7
D-16341 Panketal
Phone +49 (0) 30 / 94 41 49 62
Fax +49 (0) 30 / 94 41 49 63
Jens.Duchow@de.ebmpapst.com
Bielefeld
Dipl.-Ing. (FH) Wolf-Jürgen Weber
Niehausweg 13
D-33739 Bielefeld
Phone +49 (0) 52 06 / 9 17 32 31
Fax +49 (0) 52 06 / 9 17 32 35
Wolf-Juergen.Weber@de.ebmpapst.com
Dortmund
Dipl.-Ing. (FH) Hans-Joachim Pundt
Auf den Steinern 3
D-59519 Möhnesee-Völlinghausen
Phone +49 (0) 29 25 / 80 04 07
Fax +49 (0) 29 25 / 80 04 08
Hans-Joachim.Pundt@de.ebmpapst.com
Frankfurt
Dipl.-Ing. Christian Kleffmann
Dr.-Hermann-Krause-Straße 23
D-63452 Hanau
Phone +49 (0) 61 81 / 18 98 12
Fax +49 (0) 61 81 / 18 98 13
Christian.Kleffmann@de.ebmpapst.com
Halle
Dipl.-Ing. (TU) Michael Hanning
Lerchenweg 4
D-06120 Lieskau
Phone +49 (0) 3 45 / 5 51 24 56
Fax +49 (0) 3 45 / 5 51 24 57
Michael.Hanning@de.ebmpapst.com
Hamburg
Ingenieurbüro Breuell GmbH
Ing. Dirk Kahl
Elektroingenieur
Grützmühlenweg 40
D-22339 Hamburg
Phone +49 (0) 40 / 53 80 92 55
Fax +49 (0) 40 / 53 80 92 84
Dirk.Kahl@de.ebmpapst.com
ESM_englisch_03_2009:Axial_D 09.03.2009 14:42 Seite 22
23
Europe
Austria
ebm-papst Motoren & Ventilatoren GmbH
Westbahnstraße 5
A-4490 St. Florian
Phone +43 / 72 24 / 66 01 10
Fax +43 / 72 24 / 66 01 120
info@at.ebmpapst.com
www.ebmpapst.at
Belarus
ebm-papst Bel AgmbH
Prospekt Nesavisimosti 11/2 office 325, 512
BY-220050 Minsk
Phone +375 / 17 / 209 95 61
Fax +375 / 17 / 209 95 61
info@by.ebmpapst.com
www.ebmpapst.by
Belgium
VIBO Benelux B. V.
Sales office Belgium-Luxemburg
Romeinsestraat 6/0101
Research Park Haasrode
B-3001 Heverlee-Leuven
Phone +32 / 16 / 39 62 00
Fax +32 / 16 / 39 62 20
info@vibobenelux.com
www.vibobenelux.com
Bulgaria
ebm-papst Romania S.R.L.
Str. Tirnavei Nr. 20
RO-500327 Brasov
Phone +40 / 268 / 312 805
Fax +40 / 268 / 312 805
dudasludovic@xnet.ro
Croatia
ebm-papst Industries Kft.
Ezred u. 2.
H-1044 Budapest
Phone +36 / 1 / 87 22 190
Fax +36 / 1 / 87 22 194
office@hu.ebmpapst.com
www.ebmpapst.hu
Cyprus
MATERO LTD
37, St. Kyriakides Avenue
P.O. Box 51744
CY-3080 Limassol
Phone +357 / 25 / 87 00 30
Fax +357 / 25 / 38 13 66
matero@cytanet.com.cy
www.matero.com.cy
Czech Republic / Slovakia
ebm-papst CZ s.r.o.
Krátká 379
CZ-66461 Rajhradice u Brna
Phone +420 / 547 / 232 617
Fax +420 / 547 / 232 622
info@ebmpapst.cz
www.ebmpapst.cz
Denmark
Jenk A/S
Vallensbækvej 21
DK-2605 Brøndby
Phone +45 / 43 / 63 11 11
Fax +45 / 43 / 63 05 05
jenk@jenk.dk
www.jenk.dk
Estonia
ebm-papst Oy Eesti Filiaal
Kadaka tee 3
EST-10621 Tallinn
Phone +372 / 65 56 / 978
Fax +372 / 65 56 / 979
www.ebmpapst.ee
Finland
ebm-papst Oy
Puistotie 1
FIN-02760 Espoo
Phone +358 / 9 / 88 70 22 0
Fax +358 / 9 / 88 70 22 13
mailbox@ebmpapst.fi
www.ebmpapst.fi
France
ebm-papst SARL
ZI Nord - rue A. Mohler
BP 62
F-67212 Obernai-Cedex
Phone +33 / 820 326 266
Fax +33 / 3 / 88 67 38 83
info@ebmpapst.fr
www.ebmpapst.fr
Greece
Helcoma
Th. Rotas & Co OE
Davaki 65
GR-17672 Kallithea-Attiki
Phone +30 / 210 / 951 37 05
Fax +30 / 210 / 951 34 90
contact@helcoma.gr
www.helcoma.gr
Hungary
ebm-papst Industries Kft.
Ezred u. 2.
H-1044 Budapest
Phone +36 / 1 / 87 22 190
Fax +36 / 1 / 87 22 194
office@hu.ebmpapst.com
www.ebmpapst.hu
Iceland
RJ Engineers
Stangarhyl 1A
IS-110 Reykjavik
Phone +354 / 567 80 30
Fax +354 / 567 80 15
rj@rj.is
www.rj.is
Ireland
ebm-papst Limited
Portlaoise Business & Technology Park
Mountrath Road
IRL-Portlaoise, Co. Laois
Phone +353 / 57 86 / 643 43
Fax +353 / 57 86 / 643 46
sales@ie.ebmpapst.com
www.ebmpapst.ie
Italy
ebm-papst Srl
Via Cornaggia 108
I-22076 Mozzate (Co)
Phone +39 / 03 31 / 83 62 01
Fax +39 / 03 31 / 82 15 10
info@it.ebmpapst.com
www.ebmpapst.it
Macedonia
ebm-papst Industries Kft.
Ezred u. 2.
H-1044 Budapest
Phone +36 / 1 / 87 22 190
Fax +36 / 1 / 87 22 194
office@hu.ebmpapst.com
www.ebmpapst.hu
ESM_englisch_03_2009:Axial_D 09.03.2009 14:42 Seite 23
24
ebm-papst representatives & subsidiaries
fan agent
compact fan agent
motor specialist
motor agent
Russia
ebm-papst Ural GmbH
Posadskaja-Strasse, 23(E), 3
RU-620102 Ekaterinburg
Phone +7 / 343 / 233 80 00
Fax +7 / 343 / 233 77 88
Konstantin.Molokov@ru.ebmpapst.com
www.ebmpapst.ur.ru
ebm-papst Rus GmbH
Nizhegorodskaya 32, str. 15 office 420
RU-109029 Moskau
Phone +7 / 495 / 671 53 93
Fax +7 / 495 / 671 53 95
info@ebmpapst.ru
www.ebmpapst.ru
ebm-papst Rus
Saint-Petersburg´s Filial
Zastavskaya 7
RU-196084 Sankt-Petersburg
Phone +7 / 812 / 449 96 07
Fax +7 / 812 / 449 96 07
spb@ru.ebmpapst.com
Serbia & Montenegro
ebm-papst Industries Kft.
Ezred u. 2.
H-1044 Budapest
Phone +36 / 1 / 87 22 190
Fax +36 / 1 / 87 22 194
office@hu.ebmpapst.com
www.ebmpapst.hu
Spain
ebm-papst Ibérica S.L.
Avda. del Sistema Solar, 29
E-28830 San Fernando de Henares (Madrid)
Phone +34 / 91 / 678 08 94
Fax +34 / 91 / 678 15 30
ventas@ebmpapst.es
Sweden
ebm-papst AB
Äggelundavägen 2
S-17562 Järfälla
Phone +46 / 8 / 761 94 00
Fax +46 / 8 / 36 23 06
info@ebmpapst.se
www.ebmpapst.se
Switzerland
ebm-papst AG
Rütisbergstrasse 1
CH-8156 Oberhasli
Phone +41 / 44 / 732 20 70
Fax +41 / 44 / 732 20 77
verkauf@ebmpapst.ch
www.ebmpapst.ch
Turkey
Akantel Elektronik San. Tic. LTD. Sti.
Atatürk Organize Sanayi
Bölgesi 10007 SK. No.:6
TR-35620 Cigli-Izmir
Phone +90 / 232 / 328 20 90
Fax +90 / 232 / 328 02 70
akantel@akantel.com.tr
www.ebmpapst.com.tr
Ukraine
ebm-papst Ukraine LLC
Lepse Boulevard, 4, Building 47
UA-03067 Kiev
Phone +38 / 044 / 206 30 91
Fax +38 / 044 / 206 30 91
mail@ebmpapst.ua
www.ebmpapst.ua
United Kingdom
ebm-papst UK Ltd.
Chelmsford Business Park
GB-Chelmsford Essex CM2 5EZ
Phone +44 / 12 45 / 46 85 55
Fax +44 / 12 45 / 46 63 36
sales@uk.ebmpapst.com
www.ebmpapst.co.uk
ebm-papst Automotive & Drives (UK) Ltd.
The Smithy
Fidlers Lane, East Ilsley
GB-Berkshire RG20 7LG
Phone +44 / 87 07 / 66 51 70
Fax +44 / 87 07 / 66 51 80
A&Dsales@uk.ebmpapst.com
www.ebmpapst-ad.com
Netherlands
VIBO Benelux B. V.
Engelseweg 127
Postbus 230
NL-5705 AC Helmond
Phone +31 / 4 92 / 50 29 00
Fax +31 / 4 92 / 50 29 50
verkoop@vibobenelux.com
www.vibobenelux.com
Norway
ebm-papst AS
P.B. 173 Holmlia
N-1203 Oslo
Phone +47 / 22 / 76 33 40
Fax +47 / 22 / 61 91 73
mailbox@ebmpapst.no
www.ebmpapst.no
Poland
ebm-papst Polska Sp. z o.o.
ul. Annopol 4A
PL-03236 Warszawa
Phone +48 / 22 / 675 78 19
Fax +48 / 22 / 676 95 87
office@ebmpapst.pl
www.ebmpapst.pl
Portugal
ebm-papst (Portugal), Lda.
Av. Marechal Gomes da Costa, 35 e
Rua Conselheiro Emidio Navarro
P-1800-255 Lisboa
Phone +351 / 218 / 394 880
Fax +351 / 218 / 394 759
info@pt.ebmpapst.com
www.ebmpapst.pt
Romania
ebm-papst Romania S.R.L.
Str. Tirnavei Nr. 20
RO-500327 Brasov
Phone +40 / 268 / 312 805
Fax +40 / 268 / 312 805
dudasludovic@xnet.ro
ESM_englisch_03_2009:Axial_D 09.03.2009 14:42 Seite 24
25
America
Argentina
ebm-papst de Argentina S.A.
Hernandarias 148 Lomas del Mirador
Pcia. de Buenos Aires (1752)
Phone +54 / 11 46 57 61 35
Fax +54 / 11 46 57 20 92
ventas@ar.ebmpapst.com
www.ebmpapst.com.ar
Brasil
ebm-papst Motores Ventiladores Ltda.
Av. José Giorgi, 301 Galpões B6+B7
Condominio Logical Center
BR-06707-100 Cotia - São Paulo
Phone +55 /11 / 31 64 89 00
Fax +55 /11 / 47 77 14 56
vendas@br.ebmpapst.com
www.ebmpapst.com.br
Canada
ebm-papst Canada Inc.
1800 Ironstone Manor, Unit 2
CDN-Pickering, Ontario, L1W3J9
Phone +1 / 905 / 420 / 35 33
Fax +1 / 905 / 420 / 37 72
sales@ca.ebmpapst.com
www.ebmpapst.ca
Mexico
ebm Industrial S.de R.L. de C.V.
Paseo de Tamarindos 400-A-5to Piso
Col. Bosques de las Lomas
MEX-Mexico 05120, D.F.
Phone +52 / 55 / 33 00 51 44
Fax +52 / 55 / 33 00 52 43
sales@mx.ebmpapst.com
www.ebmpapst.com.mx
USA
ebm-papst Inc.
P.O. Box 4009
100 Hyde Road
USA-Farmington, CT 06034
Phone +1 / 860 / 674 15 15
Fax +1 / 860 / 674 85 36
sales@us.ebmpapst.com
www.ebmpapst.us
ebm-papst Automotive & Drives, Inc.
3200 Greenfield, Suite 255
USA-Dearborn, MI 48120
Phone +1 / 313 / 406 80 80
Fax +1 / 313 / 406 80 81
automotive@us.ebmpapst.com
www.ebmpapst-automotive.us
Africa
South Africa
ebm-papst South Africa (Pty) Ltd.
P.O. Box 3124
1119 Yacht Avenue
ZA-2040 Honeydew
Phone +27 / 11 / 794 34 34
Fax +27 / 11 / 794 50 20
info@za.ebmpapst.com
www.ebmpapst.co.za
ESM_englisch_03_2009:Axial_D 09.03.2009 14:43 Seite 25
26
ebm-papst representatives & subsidiaries
fan agent
compact fan agent
motor specialist
motor agent
Asia
China
ebm-papst Ventilator (Shanghai) Co., Ltd.
No. 418, Huajing Road
WaiGaoQiao Free Trade Zone
No. 2001, Yang Gao (N) Road
VRC-200131 Shanghai, P.R. of China
Phone +86 / 21 / 50 46 01 83
Fax +86 / 21 / 50 46 11 19
sales@cn.ebmpapst.com
www.ebmpapst.com.cn
Hong Kong
ebm-papst Ventilator (Shanghai) Co., Ltd.
Hong Kong Representative Office
Unit Nos. 13-15, 9/F, Technology Park
18 On Lai Street, Siu Lek Yuen, Shatin,
N.T. Hong Kong P.R. of China
Phone +852 / 21 45 / 86 78
Fax +852 / 21 45 / 76 78
info@hk.ebmpapst.com
India
ebm NADI International Pvt Ltd.
26/3, G.N.T. Road, Erukkencherry
IND-Chennai-600118
Phone +91 / 44 / 25 37 25 56
Fax +91 / 44 / 25 37 11 49
ebmnadi@md2.vsnl.net.in
www.ebmnadi.com
Indonesia
ebm-papst Indonesia
Wisma Slipi, Jl. Letjend S. Parman Kav. 12
14th Floor, No. 1410
RI-11480 Jakarta Barat
Phone +62 / 21 / 53 66 19 01
Fax +62 / 21 / 53 66 19 05
salesdept@id.ebmpapst.com
Israel
Polak Bros. Import Agencies Ltd.
9 Hamefalsim Street
IL-Kiryat Arie, Petach-Tikva 49514
Phone +972 / 3 / 910 03 00
Fax +972 / 3 / 579 66 79
polak@polak.co.il
www.polak.co.il
Japan
ebm-papst Industries Japan K.K.
12 Floor, Benex S-3 Bldg.
3-20-8 Shinyokohama, Kohoku-ku
J-222-0033 Yokohama
Phone +81 / 45 / 470 / 57 51
Fax +81 / 45 / 470 / 57 52
info@jp.ebmpapst.com
www.ebmpapst.jp
Korea
ebm-papst Korea Co. Ltd.
6F, Trutec Bldg.
B 6-2, Digital Media City (DMC)
Sangam-Dong, Mapo-Gu
ROK-Seoul 121-270
Phone +82 / 2 / 36 62 / 13 24
Fax +82 / 2 / 36 62 / 13 26
info@kr.ebmpapst.com
www.ebmpapst.co.kr
Malaysia
ebm-papst Malaysia
Representative Office
Block F1, 9A-4, Jln PJU 1/42
Dataran Prima
MAL-47301 Petaling Jaya
Phone +60 / 3 / 78 06 54 40
Fax +60 / 3 / 78 06 54 41
salesdept@my.ebmpapst.com
Singapore
ebm-papst SEA Pte. Ltd.
No. 23 Ubi Road 4
#06-00 Olympia Industrial Building
SGP-Singapore 408620
Phone +65 / 65 51 37 89
Fax +65 / 68 42 84 39
salesdept@sg.ebmpapst.com
Taiwan
ETECO Engineering & Trading Corp.
10F-I, No. 92, Teh-Wei Str.
RC-Tsow-Inn District, Kaohsiung
Phone +886 / 7 / 557 42 68
Fax +886 / 7 / 557 27 88
eteco@ms22.hinet.net
Thailand
ebm-papst Thailand Co., Ltd.
99/349 Na-Nakorn Bldg., 4th Floor
Chaeng Wattana Road, Thungsonghong,
THA-10210 Laksi, BKK
Phone +66 / 2 / 5 76 15 24
Fax +66 / 2 / 5 76 15 42
salesdept@th.ebmpapst.com
United Arab Emirates
ebm-papst Middle East FZE
PO Box 17755
Jebel Ali Free Zone / FZS1 / AP05
UAE-Dubai
Phone +971 / 4 / 886 08 26
Fax +971 / 4 / 886 08 27
info@ae.ebmpapst.com
www.ebmpapst.ae
ESM_englisch_03_2009:Axial_D 09.03.2009 14:43 Seite 26
27
Australia
Australia
ebm-papst A&NZ Pty Ltd.
10 Oxford Road
AUS-Laverton North, Victoria, 3026
Phone +61 / 3 / 83 25 64 00
Fax +61 / 3 / 83 25 64 64
sales@ebmpapst.com.au
www.ebmpapst.com.au
New Zealand
ebm-papst A&NZ Pty Ltd.
102 Henderson Valley Road
NZ-Henderson, Auckland 1230
Phone +64 / 9 / 837 18 84
Fax +64 / 9 / 837 18 99
sales@ebmpapst.com.au
www.ebmpapst.com.au
ESM_englisch_03_2009:Axial_D 09.03.2009 14:43 Seite 27
ebm-papst
Mulfingen GmbH & Co. KG
Bachmühle 2
D-74673 Mulfingen
Phone +49 (0) 79 38 / 81-0
Fax +49 (0) 79 38 / 81-110
info1@de.ebmpapst.com
www.ebmpapst.com
37804-7-8811 · GK-08/08-3’
Printed in Germany
ESM_englisch_03_2009:Axial_D 09.03.2009 14:43 Seite 28
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ebm-papst:
W1G172-EC95-01 W1G200-EC91-27 W1G200-EC87-25 W1G200-EC95-47 S1G200-CA95-02 S1G200-CA91-02
W1G230-EB97-01 W1G230-EB89-01 W1G250-BB21-01 W1G250-BB17-01 W1G300-BB23-01 W1G300-BB19-01
S1G300-CA19-02 10640-4-1040
