Model 830
www.vishay.com Vishay Spectrol
Revision: 27-Mar-15 1Document Number: 57073
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 13/16" (46 mm) Three Turn Wirewound Potentiometer
Bushing Mount
FEATURES
• Gangable up to 2 sections
• Large range of ohmic values: 15 to 50 k
• Extra taps available upon request
• Ideally suits for all industry applications
QUICK REFERENCE DATA
Sensor type ROTATIONAL, multi turn wirewound
Output type Output by turrets
Market appliance Industrial
Dimensions 1 13/16" (46 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER MODEL 830
Total resistance
Standard range
Tolerance:
200 and above
Below 200
15 to 50 k
STANDARD
± 3 %
± 5 %
SPECIAL
to 150 k
SPECIAL
± 1 %
± 3 %
Linearity (independent) ± 0.25 % standard
15 to 1 k
1 k to 5 k
5 k to 25 k
25 k and above
± 0.15 %
± 0.10 %
± 0.075 %
± 0.05 %
Noise 100 ENR
Electrical rotation 1080° +4° -0°
Power rating 3.0 W at 40 °C derated to zero at 125 °C
Insulation resistance 1000 M minimum 500 VDC
Dielectric strength 1000 VRMS, 60 Hz
Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater
End voltage 0.5 % of total applied voltage maximum
Phasing CCW end points sect. 2 phased to sect 1 within 1°
Taps (extra) Available as special standard tolerance ± 1°
ORDERING INFORMATION/DESCRIPTION
Model 830 can be ordered from this datasheet with a variety of alternate characteristics, as shown. For most rapid service on your order,
please state:
830 B 1 20K BO10
MODEL BUSHING MOUNT NUMBER OF SECTIONS RESISTANCE OF EACH SECTION PACKAGING
From 1 up to 2 sections
(maximum)
Beginning with the section nearest
the mounting end Box of 10 pieces
SAP PART NUMBERING GUIDELINES
830 B 1 203 B10
MODEL STYLE NUMBER OF SECTION OHMIC VALUE OF SECTION No 1PACKAGING
Model 830
www.vishay.com Vishay Spectrol
Revision: 27-Mar-15 2Document Number: 57073
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches (millimeters)
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation 1080° +4° -0°
Bearing type Sleeve bearing
Torque (maximums): starting
Section 1
Section 2
STARTING
1.75 oz. - in (126.02 g - cm)
2.55 oz. - in (183.62 g - cm)
RUNNING
1.26 oz. - in (90.01 g - cm)
1.85 oz. - in (133.21 g - cm)
Runouts (maximums)
Shaft (TIR)
Pilot dia. (TIR)
Lateral (TIR)
Shaft end play
Shaft radial play
0.002" (0.05 cm)
0.002" (0.05 cm)
0.005" (0.13 cm)
0.002" min. 0.010" max. (0.05 cm to 0.25 cm)
0.003" max. (0.08 cm)
Weight (maximums)
Single section
Additional section
3.0 oz. (85.05 g)
2.5 oz. (70.80 g)
Stop strength 750 oz. - in (static) (54.01 kg - cm)
Ganging 2 sections maximum ears of clamp band between sections positioned 45°, ± 10° CCW from terminal
center line
Moment inertia 5.5 g - cm2 maximum
0.218
(5.54)
± 0.015
0.562
(14.27)
Ø 0.125
(3.18)
MTG. FACE
0.812
(20.62)
± 0.031
0.312
(7.92)
0.030
MAX.
(0.76)
± 0.015
1.812
(46.02)
± 0.015
Ø 0.2497
(6.34)
+ 0.0000
- 0.0003
Ø 0.4062 MTG.
(10.32)
+ 0.0000
- 0.0020
0.062
(1.57)
0.010
(0.25)
0.062
(1.57)
0.250
MIN.
(6.35)
1.218
(30.94)
± 0.015
MODEL: 830/830-1...
ADD 1.010 ± 0.010 (25.65) FOR 2 GANG UNIT
3/8 - 32 UNEF - 2A
1
23
1
TOLERANCES: OTHERWISE NOTED.
DECIMALS ± 0.005 ANGLES ± 2°
CW
SCHEMATIC
2
3
1
1
Model 830
www.vishay.com Vishay Spectrol
Revision: 27-Mar-15 3Document Number: 57073
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Nothing stated herein shall be construed as a guarantee of
quality or durability.
POWER RATING CHART
MATERIAL SPECIFICATIONS
Bushing Aluminum, nickel plated
Housing and front lid Molded glass filled thermoset
plastic
Rear lid Molded glass filled nylon
Shaft Stainless steel, non magnetic,
non-passivated
Terminals Brass, plated for solderability
Mounting hardware
Lockwasher:
Panel nut:
Internal tooth steel, nickel plated
Brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
Vibration 10 g thru 500 CPS
Shock 50 g
Rotational life 500 000 shaft revolution
Load life 900 h
Temperature range -55 °C to +125 °C
Salt spray 48 h
MARKING
Unit identification
Units will be marked with Spectrol name and model no, resistance and resistance tolerance, linearity, terminal
identification, and date code.
Example of a marking for a standard part: 830-11103
0 20 40 60 80 100 120 140
AMBIENT TEMPERATURE IN °C
RATED POWER IN W
0
2
4
6
8
10
12
RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
(
)
RESO-
LUTION
(%)
OHMS
PER
TURN
MAXIMUM
CURRENT
AT 70 °C
AMBIENT
(mA)
MAXIMUM
VOLTAGE
ACROSS
COIL
(V)
WIRE
TEMP.
COEF.
(ppm/°C)
20 0.094 0.019 387 8 800
50 0.074 0.037 245 12 800
100 0.071 0.071 173 17 180
200 0.072 0.145 122 25 20
500 0.064 0.320 77 39 20
1K 0.050 0.500 55 55 20
2K 0.047 0.948 39 77 20
5K 0.035 1.73 24 125 20
10K 0.029 2.92 17 176 20
20K 0.024 4.80 12 250 20
50K 0.017 8.31 8 375 20
100K 0.015 14.5 5 600 20
150K 0.013 20.0 4 750 20
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
