Series PF, PowerFin TM Up to 25Amp * 120/240/380/480 Vac - AC OUTPUT Crydom's PowerFin series delivers the highest ratings of any single in-line package (SIP). The integral heat sink design can operate at 25 amps RMS in forced air at 85uC case temp. With natural convection in free air, it rates 10 amps RMS at 25uC ambient. TM * Ultra High Steady State Current Rating * Low Leakage (Off- State ) * SCR Output * AC or DC Control Built-in advantages include Surface Mount Technology and SCR output. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability. * Crydom's Patented Design MODEL NUMBERS AC CONTROL (120Vac) (24Vac) PF240A25 PFE240A25 (5Vdc) (24Vdc) PF240D25 PFE240D25 PF380D25 PFE380D25 PF480D25 PFE480D25 12-280 48-530 48-660 DC CONTROL OUTPUT SPECIFICATIONS Operating Voltage (47-63 Hz) [Vrms] Forced Air.06-25 Convection Air .06-10 Load Current Range [Arms] Transient Overvoltage [Vpk] 600 1200 1200 Max. Surge Current, (16.6ms) [Apk] 250 250 250 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 260 260 Max. Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1 Min. Off-State dv/dt @ Max. Rated Voltage [V/sec] 500 500 500 Max. Turn-On Time 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec (AC Control) 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS Nominal Voltage 0.5 DC CONTROL 5Vdc 5Vdc PF240D25 Control Voltage Range 0.5 AC CONTROL 120Vac 24Vac PF380D25 PF480D25 24Vdc PFE240D25 PFE380D25 PFE480D25 PF240A25 PFE240A25 3-15 Vdc 4-15 Vdc 15-32 Vdc 90-140 Vrms 18-36 Vrms Max. Turn-On Voltage 3.0 Vdc 4.0 Vdc 15.0 Vdc 90.0 Vrms 18.0 Vrms Min. Turn-Off Voltage 1.0 Vdc 1.0 Vdc 1.0 Vdc 10.0 Vrms 2.0 Vrms Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1k Ohm 4.2k Ohm Typical Input Current @ Nominal Voltage 15 mAdc 15 mAdc 15 mAdc 10 mArms 5 mArms MODEL NUMBERS GENERAL NOTES (c) 2003 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heatsink temperature 85uC Maximum. Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). FastFax Document No. 115 SERIES PF Rev. 111403 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series PF, PowerFin TM Up to 25Amp * 120/240/380/480 Vac - AC OUTPUT GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc 8 pF Max. Capacitance Input/Output Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125C M ECHANICAL SPECIFICATIONS Weight: (typical) .85 oz. (25g) Encapsulation: Thermally Conductive Epoxy 1.6 TYP. (38.1) AVAILABLE OPTIONS R Random Turn-On (AC & DC Control, 240V Only) Phase Controllable (DC Control, 240V Only) Example: PF240A25 R, PFE240D25 R 1.35 MAX. (34.3) .050 (1.3) 4 3 2 .300 (7.6) TYP. 1 .72 (18.3) TYP. .200 (5.1) .700 (17.8) 1.100 (27.9) 1.70 (43.1) .900 (22.8) DC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL .040 (1.0) DIA. 4 PLACES All dimensions are in inches (millimeters) AC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: AC CONTROL PIN 4: AC CONTROL 10 LOAD CURRENT (AMPS) LOAD CURRENT (AMPS) CURRENT DERATING CURVES 8 6 4 2 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE (Cu) F ig .1 C onvection C ooling APPROVALS UL E116950 VDE 70938 (DC Control Only) FastFax Document No. 115 SERIES PF Rev. 111403 PAGE 2 OF 2 80 25 20 15 10 5 0 0 20 40 60 80 100 120 140 HEATSINK TEMPERATURE (Cu) F ig .2 F orced A ir C ooling (c)2003 CRYDOM CORP, Specifications subject to change without notice. For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506